From: Carsten Haitzler <carsten.haitzler@xxxxxxx> If something has already set up the DPU before the komeda driver comes up, it will fail to init because it was just writing to the SRST bit in the GCU control register and ignoring others. This resulted in TBU bringup stalling and init failing. By writing completely we also set the mode back to 0 (inactive) too and thus TBU bringup works. Signed-off-by: Carsten Haitzler <carsten.haitzler@xxxxxxx> --- drivers/gpu/drm/arm/display/komeda/d71/d71_dev.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/gpu/drm/arm/display/komeda/d71/d71_dev.c b/drivers/gpu/drm/arm/display/komeda/d71/d71_dev.c index 00fa56c29b3e..39618c1a4c81 100644 --- a/drivers/gpu/drm/arm/display/komeda/d71/d71_dev.c +++ b/drivers/gpu/drm/arm/display/komeda/d71/d71_dev.c @@ -309,8 +309,7 @@ static int d71_reset(struct d71_dev *d71) u32 __iomem *gcu = d71->gcu_addr; int ret; - malidp_write32_mask(gcu, BLK_CONTROL, - GCU_CONTROL_SRST, GCU_CONTROL_SRST); + malidp_write32(gcu, BLK_CONTROL, GCU_CONTROL_SRST); ret = dp_wait_cond(!(malidp_read32(gcu, BLK_CONTROL) & GCU_CONTROL_SRST), 100, 1000, 10000); -- 2.32.0
