On Fri, 2013-02-15 at 13:36 -0200, Paulo Zanoni wrote: > From: Paulo Zanoni <paulo.r.zanoni@xxxxxxxxx> > > If bit 0 of the features byte (0x18) is set to 0, then, according to > the EDID spec, "the display is non-continuous frequency (multi-mode) > and is only specified to accept the video timing formats that are > listed in Base EDID and certain Extension Blocks". > > For more information, please see the EDID spec, check the notes of the > table that explains the "Feature Support" byte (18h) and also the > notes on the tables of the section that explains "Display Range Limits > & Additional Timing Description Definition (tag #FDh)". Seems sane. Reviewed-by: Adam Jackson <ajax@xxxxxxxxxx> - ajax _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel
