From: "Nancy.Lin" <nancy.lin@xxxxxxxxxxxx> Add vdosys1 RDMA definition. Signed-off-by: Nancy.Lin <nancy.lin@xxxxxxxxxxxx> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx> --- .../display/mediatek/mediatek,mdp-rdma.yaml | 94 +++++++++++++++++++ 1 file changed, 94 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/mediatek/mediatek,mdp-rdma.yaml diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,mdp-rdma.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,mdp-rdma.yaml new file mode 100644 index 000000000000..ca31accb0a95 --- /dev/null +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,mdp-rdma.yaml @@ -0,0 +1,94 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/mediatek/mediatek,mdp-rdma.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MDP RDMA + +maintainers: + - Chun-Kuang Hu <chunkuang.hu@xxxxxxxxxx> + - Philipp Zabel <p.zabel@xxxxxxxxxxxxxx> + +description: + The MediaTek MDP RDMA stands for Read Direct Memory Access. + It provides real time data to the back-end panel driver, such as DSI, + DPI and DP_INTF. + It contains one line buffer to store the sufficient pixel data. + RDMA device node must be siblings to the central MMSYS_CONFIG node. + For a description of the MMSYS_CONFIG binding, see + Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml for details. + +properties: + compatible: + oneOf: + - items: + - const: mediatek,mt8195-vdo1-rdma + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + power-domains: + description: A phandle and PM domain specifier as defined by bindings of + the power controller specified by phandle. See + Documentation/devicetree/bindings/power/power-domain.yaml for details. + + clocks: + items: + - description: RDMA Clock + + iommus: + description: + This property should point to the respective IOMMU block with master port as argument, + see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details. + + mediatek,gce-client-reg: + description: + The register of display function block to be set by gce. There are 4 arguments, + such as gce node, subsys id, offset and register size. The subsys id that is + mapping to the register of display function blocks is defined in the gce header + include/include/dt-bindings/gce/<chip>-gce.h of each chips. + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + items: + - description: phandle of GCE + - description: GCE subsys id + - description: register offset + - description: register size + maxItems: 1 + +required: + - compatible + - reg + - power-domains + - clocks + - iommus + - mediatek,gce-client-reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/mt8195-clk.h> + #include <dt-bindings/power/mt8195-power.h> + #include <dt-bindings/gce/mt8195-gce.h> + #include <dt-bindings/memory/mt8195-memory-port.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + vdo1_rdma0: mdp-rdma@1c104000 { + compatible = "mediatek,mt8195-vdo1-rdma"; + reg = <0 0x1c104000 0 0x1000>; + interrupts = <GIC_SPI 495 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&vdosys1 CLK_VDO1_MDP_RDMA0>; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>; + iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA0>; + mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x4000 0x1000>; + }; + }; -- 2.18.0
