Add dt-bindings for 10.1" TFT LCD module called STARRY 2081101 QFH032011-53G. Signed-off-by: xiazhengqiao <xiazhengqiao@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx> Reviewed-by: Rob Herring <robh@xxxxxxxxxx> --- .../display/panel/innolux,himax8279d.yaml | 72 +++++++++++++++++++ 1 file changed, 72 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/innolux,himax8279d.yaml diff --git a/Documentation/devicetree/bindings/display/panel/innolux,himax8279d.yaml b/Documentation/devicetree/bindings/display/panel/innolux,himax8279d.yaml new file mode 100644 index 000000000000..fdcea3870dfb --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/innolux,himax8279d.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/innolux,himax8279d.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: INNOLUX HIMAX8279D DSI Display Panel + +maintainers: + - xiazhengqiao <xiazhengqiao@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + enum: + # STARRY 2081101QFH032011-53G 10.1" WUXGA TFT LCD panel + - starry,2081101qfh032011-53g + + reg: + description: the virtual channel number of a DSI peripheral + + enable-gpios: + description: a GPIO spec for the enable pin + + pp1800-supply: + description: core voltage supply + + avdd-supply: + description: phandle of the regulator that provides positive voltage + + avee-supply: + description: phandle of the regulator that provides negative voltage + + backlight: + description: phandle of the backlight device attached to the panel + + port: true + +required: + - compatible + - reg + - enable-gpios + - pp1800-supply + - avdd-supply + - avee-supply + +additionalProperties: false + +examples: + - | + dsi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "starry,2081101qfh032011-53g"; + reg = <0>; + enable-gpios = <&pio 45 0>; + avdd-supply = <&ppvarn_lcd>; + avee-supply = <&ppvarp_lcd>; + pp1800-supply = <&pp1800_lcd>; + backlight = <&backlight_lcd0>; + port { + panel_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + }; + }; + +... -- 2.17.1
