[PATCH 2/2] drm: bridge: icn6211: Add DSI lane count DT property parsing

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The driver currently hard-codes DSI lane count to two, however the chip
is capable of operating in 1..4 DSI lanes mode. Parse 'data-lanes' DT
property and program the result into DSI_CTRL register.

Signed-off-by: Marek Vasut <marex@xxxxxxx>
Cc: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx>
Cc: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
Cc: Maxime Ripard <maxime@xxxxxxxxxx>
Cc: Robert Foss <robert.foss@xxxxxxxxxx>
Cc: Sam Ravnborg <sam@xxxxxxxxxxxx>
Cc: Thomas Zimmermann <tzimmermann@xxxxxxx>
To: dri-devel@xxxxxxxxxxxxxxxxxxxxx
---
 drivers/gpu/drm/bridge/chipone-icn6211.c | 23 +++++++++++++++++++++--
 1 file changed, 21 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/bridge/chipone-icn6211.c b/drivers/gpu/drm/bridge/chipone-icn6211.c
index 6ce0633d4c089..e2b599a44275c 100644
--- a/drivers/gpu/drm/bridge/chipone-icn6211.c
+++ b/drivers/gpu/drm/bridge/chipone-icn6211.c
@@ -395,6 +395,11 @@ static void chipone_atomic_enable(struct drm_bridge *bridge,
 	/* dsi specific sequence */
 	chipone_writeb(icn, SYNC_EVENT_DLY, 0x80);
 	chipone_writeb(icn, HFP_MIN, hfp & 0xff);
+
+	/* DSI data lane count */
+	chipone_writeb(icn, DSI_CTRL,
+		    DSI_CTRL_UNKNOWN | DSI_CTRL_DSI_LANES(icn->dsi->lanes - 1));
+
 	chipone_writeb(icn, MIPI_PD_CK_LANE, 0xa0);
 	chipone_writeb(icn, PLL_CTRL(12), 0xff);
 	chipone_writeb(icn, MIPI_PN_SWAP, 0x00);
@@ -480,9 +485,23 @@ static void chipone_mode_set(struct drm_bridge *bridge,
 static int chipone_dsi_attach(struct chipone *icn)
 {
 	struct mipi_dsi_device *dsi = icn->dsi;
-	int ret;
+	struct device *dev = icn->dev;
+	struct device_node *endpoint;
+	int dsi_lanes, ret;
+
+	endpoint = of_graph_get_endpoint_by_regs(dev->of_node, 0, 0);
+	dsi_lanes = of_property_count_u32_elems(endpoint, "data-lanes");
+	of_node_put(endpoint);
+
+	/*
+	 * If the 'data-lanes' property does not exist in DT or is invalid,
+	 * default to previously hard-coded behavior, which was 4 data lanes.
+	 */
+	if (dsi_lanes >= 1 && dsi_lanes <= 4)
+		icn->dsi->lanes = dsi_lanes;
+	else
+		icn->dsi->lanes = 4;
 
-	dsi->lanes = 4;
 	dsi->format = MIPI_DSI_FMT_RGB888;
 	dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
 			  MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_NO_EOT_PACKET;
-- 
2.35.1




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux