Re: [Intel-gfx] [PATCH 2/9] drm/i915: Use cpu_transcoder for HSW_TVIDEO_DIP_* instead of pipe

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 30 Jan 2013, Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx> wrote:
> While old platforms had 3 transcoders and 3 pipes (1:1), HSW has 4 transcoders and 3 pipes. To avoid future mistakes transcoders must be used here instead of pipes even though it is working right now by coincidence.
>
> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
> ---
>  drivers/gpu/drm/i915/i915_reg.h   | 16 ++++++++--------
>  drivers/gpu/drm/i915/intel_hdmi.c | 12 ++++++------
>  2 files changed, 14 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 2521617..7bb3134 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -3742,14 +3742,14 @@
>  #define HSW_VIDEO_DIP_VSC_ECC_B		0x61344
>  #define HSW_VIDEO_DIP_GCP_B		0x61210
>  
> -#define HSW_TVIDEO_DIP_CTL(pipe) \
> -	 _PIPE(pipe, HSW_VIDEO_DIP_CTL_A, HSW_VIDEO_DIP_CTL_B)
> -#define HSW_TVIDEO_DIP_AVI_DATA(pipe) \
> -	 _PIPE(pipe, HSW_VIDEO_DIP_AVI_DATA_A, HSW_VIDEO_DIP_AVI_DATA_B)
> -#define HSW_TVIDEO_DIP_SPD_DATA(pipe) \
> -	 _PIPE(pipe, HSW_VIDEO_DIP_SPD_DATA_A, HSW_VIDEO_DIP_SPD_DATA_B)
> -#define HSW_TVIDEO_DIP_GCP(pipe) \
> -	_PIPE(pipe, HSW_VIDEO_DIP_GCP_A, HSW_VIDEO_DIP_GCP_B)
> +#define HSW_TVIDEO_DIP_CTL(trans) \
> +	 _TRANSCODER(trans, HSW_VIDEO_DIP_CTL_A, HSW_VIDEO_DIP_CTL_B)
> +#define HSW_TVIDEO_DIP_AVI_DATA(trans) \
> +	 _TRANSCODER(trans, HSW_VIDEO_DIP_AVI_DATA_A, HSW_VIDEO_DIP_AVI_DATA_B)
> +#define HSW_TVIDEO_DIP_SPD_DATA(trans) \
> +	 _TRANSCODER(trans, HSW_VIDEO_DIP_SPD_DATA_A, HSW_VIDEO_DIP_SPD_DATA_B)
> +#define HSW_TVIDEO_DIP_GCP(trans) \
> +	_TRANSCODER(trans, HSW_VIDEO_DIP_GCP_A, HSW_VIDEO_DIP_GCP_B)

Okay, I'm confused. The patch does make sense, but bspec doesn't... the
spec says the above HSW_TVIDEO_DIP_* registers (in the 0x6xxxx range)
are per pipe, and the TVIDEO_DIP_* registers (in the 0xexxxx range) are
per transcoder. Care to enlighten me here...?

Also, outside of this patch, have we reviewed if there's always a
register for TRANSCODER_EDP where _TRANSCODER() macro is used?

BR,
Jani.


>  
>  #define _TRANS_HTOTAL_B          0xe1000
>  #define _TRANS_HBLANK_B          0xe1004
> diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
> index d53b731..ab95e05 100644
> --- a/drivers/gpu/drm/i915/intel_hdmi.c
> +++ b/drivers/gpu/drm/i915/intel_hdmi.c
> @@ -120,13 +120,13 @@ static u32 hsw_infoframe_enable(struct dip_infoframe *frame)
>  	}
>  }
>  
> -static u32 hsw_infoframe_data_reg(struct dip_infoframe *frame, enum pipe pipe)
> +static u32 hsw_infoframe_data_reg(struct dip_infoframe *frame, enum transcoder cpu_transcoder)
>  {
>  	switch (frame->type) {
>  	case DIP_TYPE_AVI:
> -		return HSW_TVIDEO_DIP_AVI_DATA(pipe);
> +		return HSW_TVIDEO_DIP_AVI_DATA(cpu_transcoder);
>  	case DIP_TYPE_SPD:
> -		return HSW_TVIDEO_DIP_SPD_DATA(pipe);
> +		return HSW_TVIDEO_DIP_SPD_DATA(cpu_transcoder);
>  	default:
>  		DRM_DEBUG_DRIVER("unknown info frame type %d\n", frame->type);
>  		return 0;
> @@ -293,8 +293,8 @@ static void hsw_write_infoframe(struct drm_encoder *encoder,
>  	struct drm_device *dev = encoder->dev;
>  	struct drm_i915_private *dev_priv = dev->dev_private;
>  	struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
> -	u32 ctl_reg = HSW_TVIDEO_DIP_CTL(intel_crtc->pipe);
> -	u32 data_reg = hsw_infoframe_data_reg(frame, intel_crtc->pipe);
> +	u32 ctl_reg = HSW_TVIDEO_DIP_CTL(intel_crtc->cpu_transcoder);
> +	u32 data_reg = hsw_infoframe_data_reg(frame, intel_crtc->cpu_transcoder);
>  	unsigned int i, len = DIP_HEADER_SIZE + frame->len;
>  	u32 val = I915_READ(ctl_reg);
>  
> @@ -566,7 +566,7 @@ static void hsw_set_infoframes(struct drm_encoder *encoder,
>  	struct drm_i915_private *dev_priv = encoder->dev->dev_private;
>  	struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
>  	struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
> -	u32 reg = HSW_TVIDEO_DIP_CTL(intel_crtc->pipe);
> +	u32 reg = HSW_TVIDEO_DIP_CTL(intel_crtc->cpu_transcoder);
>  	u32 val = I915_READ(reg);
>  
>  	assert_hdmi_port_disabled(intel_hdmi);
> -- 
> 1.7.11.7
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel


[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux