Hi, Nancy: On Fri, 2022-03-18 at 22:19 +0800, Nancy.Lin wrote: > Add vdosys1 RDMA definition. See my review comment in v14 [1]. [1] https://patchwork.kernel.org/project/linux-mediatek/patch/20220310035515.16881-2-nancy.lin@xxxxxxxxxxxx/ Regards, CK > > Signed-off-by: Nancy.Lin <nancy.lin@xxxxxxxxxxxx> > Reviewed-by: AngeloGioacchino Del Regno < > angelogioacchino.delregno@xxxxxxxxxxxxx> > --- > .../arm/mediatek/mediatek,mdp-rdma.yaml | 86 > +++++++++++++++++++ > 1 file changed, 86 insertions(+) > create mode 100644 > Documentation/devicetree/bindings/arm/mediatek/mediatek,mdp-rdma.yaml > > diff --git > a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mdp- > rdma.yaml > b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mdp- > rdma.yaml > new file mode 100644 > index 000000000000..6ab773569462 > --- /dev/null > +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mdp- > rdma.yaml > @@ -0,0 +1,86 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: > https://urldefense.com/v3/__http://devicetree.org/schemas/arm/mediatek/mediatek,mdp-rdma.yaml*__;Iw!!CTRNKA9wMg0ARbw!wJXD2xhE7TC3ASmUW1ftsqaOyZ8KrCjFHeXywwGFdNi56kNKasQxnWfzt81DUQ$ > > +$schema: > https://urldefense.com/v3/__http://devicetree.org/meta-schemas/core.yaml*__;Iw!!CTRNKA9wMg0ARbw!wJXD2xhE7TC3ASmUW1ftsqaOyZ8KrCjFHeXywwGFdNi56kNKasQxnWcP0BMRuw$ > > + > +title: Mediatek MDP RDMA > + > +maintainers: > + - Matthias Brugger <matthias.bgg@xxxxxxxxx> > + > +description: | > + The mediatek MDP RDMA stands for Read Direct Memory Access. > + It provides real time data to the back-end panel driver, such as > DSI, > + DPI and DP_INTF. > + It contains one line buffer to store the sufficient pixel data. > + RDMA device node must be siblings to the central MMSYS_CONFIG > node. > + For a description of the MMSYS_CONFIG binding, see > + Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml > for details. > + > +properties: > + compatible: > + oneOf: > + - items: > + - const: mediatek,mt8195-vdo1-rdma > + > + reg: > + maxItems: 1 > + > + interrupts: > + maxItems: 1 > + > + power-domains: > + description: A phandle and PM domain specifier as defined by > bindings of > + the power controller specified by phandle. See > + Documentation/devicetree/bindings/power/power-domain.yaml for > details. > + > + clocks: > + items: > + - description: RDMA Clock > + > + iommus: > + description: > + This property should point to the respective IOMMU block with > master port as argument, > + see > Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for > details. > + > + mediatek,gce-client-reg: > + description: > + The register of display function block to be set by gce. There > are 4 arguments, > + such as gce node, subsys id, offset and register size. The > subsys id that is > + mapping to the register of display function blocks is defined > in the gce header > + include/include/dt-bindings/gce/<chip>-gce.h of each chips. > + $ref: /schemas/types.yaml#/definitions/phandle-array > + maxItems: 1 > + > +required: > + - compatible > + - reg > + - power-domains > + - clocks > + - iommus > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + #include <dt-bindings/clock/mt8195-clk.h> > + #include <dt-bindings/power/mt8195-power.h> > + #include <dt-bindings/gce/mt8195-gce.h> > + #include <dt-bindings/memory/mt8195-memory-port.h> > + > + soc { > + #address-cells = <2>; > + #size-cells = <2>; > + > + vdo1_rdma0: mdp-rdma@1c104000 { > + compatible = "mediatek,mt8195-vdo1-rdma"; > + reg = <0 0x1c104000 0 0x1000>; > + interrupts = <GIC_SPI 495 IRQ_TYPE_LEVEL_HIGH 0>; > + clocks = <&vdosys1 CLK_VDO1_MDP_RDMA0>; > + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>; > + iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA0>; > + mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x4000 > 0x1000>; > + }; > + };
