[PATCH 11/16] drm/fb-helper: fixup up set_config semantics

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



While doing the modeset rework for drm/i915 I've noticed that the fb
helper is very liberal with the semantics of the ->set_config
interface:
- It doesn't bother clearing stale modes (e.g. when unpluggint a
  screen).
- It unconditionally sets and the fb, even if no mode will be set on a
  given crtc.
- The initial setup is a bit fun since we need to pick crtcs to decide
  the desired fb size, but also should set the modeset->fb pointer.
  Explain what's going on in the fixup code after the fb is allocated.

The crtc helper didn't really care, but the new i915 modeset
infrastructure did, so I've had to add a bunch of special-cases to
catch this.

Fix this all up and enforce the interface by converting the checks in
drm/i915/intel_display.c to BUG_ONs.

Signed-off-by: Daniel Vetter <daniel.vetter@xxxxxxxx>
---
 drivers/gpu/drm/drm_fb_helper.c      |   27 +++++++++++++++++++++++----
 drivers/gpu/drm/i915/intel_display.c |   11 +++--------
 2 files changed, 26 insertions(+), 12 deletions(-)

diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c
index dbf0020..5c73a12 100644
--- a/drivers/gpu/drm/drm_fb_helper.c
+++ b/drivers/gpu/drm/drm_fb_helper.c
@@ -689,7 +689,6 @@ int drm_fb_helper_set_par(struct fb_info *info)
 	struct drm_fb_helper *fb_helper = info->par;
 	struct drm_device *dev = fb_helper->dev;
 	struct fb_var_screeninfo *var = &info->var;
-	struct drm_crtc *crtc;
 	int ret;
 	int i;
 
@@ -700,7 +699,6 @@ int drm_fb_helper_set_par(struct fb_info *info)
 
 	drm_modeset_lock_all(dev);
 	for (i = 0; i < fb_helper->crtc_count; i++) {
-		crtc = fb_helper->crtc_info[i].mode_set.crtc;
 		ret = drm_mode_set_config_internal(&fb_helper->crtc_info[i].mode_set);
 		if (ret) {
 			drm_modeset_unlock_all(dev);
@@ -841,9 +839,17 @@ static int drm_fb_helper_single_fb_probe(struct drm_fb_helper *fb_helper,
 
 	info = fb_helper->fbdev;
 
-	/* set the fb pointer */
+	/*
+	 * Set the fb pointer - usually drm_setup_crtcs does this for hotplug
+	 * events, but at init time drm_setup_crtcs needs to be called before
+	 * the fb is allocated (since we need to figure out the desired size of
+	 * the fb before we can allocate it ...). Hence we need to fix things up
+	 * here again.
+	 */
 	for (i = 0; i < fb_helper->crtc_count; i++)
-		fb_helper->crtc_info[i].mode_set.fb = fb_helper->fb;
+		if (fb_helper->crtc_info[i].mode_set.num_connectors)
+			fb_helper->crtc_info[i].mode_set.fb = fb_helper->fb;
+
 
 	if (new_fb) {
 		info->var.pixclock = 0;
@@ -1314,6 +1320,7 @@ static void drm_setup_crtcs(struct drm_fb_helper *fb_helper)
 	for (i = 0; i < fb_helper->crtc_count; i++) {
 		modeset = &fb_helper->crtc_info[i].mode_set;
 		modeset->num_connectors = 0;
+		modeset->fb = NULL;
 	}
 
 	for (i = 0; i < fb_helper->connector_count; i++) {
@@ -1330,9 +1337,21 @@ static void drm_setup_crtcs(struct drm_fb_helper *fb_helper)
 			modeset->mode = drm_mode_duplicate(dev,
 							   fb_crtc->desired_mode);
 			modeset->connectors[modeset->num_connectors++] = fb_helper->connector_info[i]->connector;
+			modeset->fb = fb_helper->fb;
 		}
 	}
 
+	/* Clear out any old modes if there are no more connected outputs. */
+	for (i = 0; i < fb_helper->crtc_count; i++) {
+		modeset = &fb_helper->crtc_info[i].mode_set;
+		if (modeset->num_connectors == 0) {
+			BUG_ON(modeset->fb);
+			BUG_ON(modeset->num_connectors);
+			if (modeset->mode)
+				drm_mode_destroy(dev, modeset->mode);
+			modeset->mode = NULL;
+		}
+	}
 out:
 	kfree(crtcs);
 	kfree(modes);
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 055b24a..7e3dd0f 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -7940,14 +7940,9 @@ static int intel_crtc_set_config(struct drm_mode_set *set)
 	BUG_ON(!set->crtc);
 	BUG_ON(!set->crtc->helper_private);
 
-	if (!set->mode)
-		set->fb = NULL;
-
-	/* The fb helper likes to play gross jokes with ->mode_set_config.
-	 * Unfortunately the crtc helper doesn't do much at all for this case,
-	 * so we have to cope with this madness until the fb helper is fixed up. */
-	if (set->fb && set->num_connectors == 0)
-		return 0;
+	/* Enforce sane interface api - has been abused by the fb helper. */
+	BUG_ON(!set->mode && set->fb);
+	BUG_ON(set->fb && set->num_connectors == 0);
 
 	if (set->fb) {
 		DRM_DEBUG_KMS("[CRTC:%d] [FB:%d] #connectors=%d (x y) (%i %i)\n",
-- 
1.7.10.4

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel


[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux