If we were to have two users of the same clock, doing something like:
clk_set_rate_range(user1, 1000, 2000);
clk_set_rate_range(user2, 3000, 4000);
The second call would fail with -EINVAL, preventing from getting in a
situation where we end up with impossible limits.
However, this is never explicitly checked against and enforced, and
works by relying on an undocumented behaviour of clk_set_rate().
Indeed, on the first clk_set_rate_range will make sure the current clock
rate is within the new range, so it will be between 1000 and 2000Hz. On
the second clk_set_rate_range(), it will consider (rightfully), that our
current clock is outside of the 3000-4000Hz range, and will call
clk_core_set_rate_nolock() to set it to 3000Hz.
clk_core_set_rate_nolock() will then call clk_calc_new_rates() that will
eventually check that our rate 3000Hz rate is outside the min 3000Hz max
2000Hz range, will bail out, the error will propagate and we'll
eventually return -EINVAL.
This solely relies on the fact that clk_calc_new_rates(), and in
particular clk_core_determine_round_nolock(), won't modify the new rate
allowing the error to be reported. That assumption won't be true for all
drivers, and most importantly we'll break that assumption in a later
patch.
It can also be argued that we shouldn't even reach the point where we're
calling clk_core_set_rate_nolock().
Let's make an explicit check for disjoints range before we're doing
anything.
Signed-off-by: Maxime Ripard <maxime@xxxxxxxxxx>
---
drivers/clk/clk.c | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index fff5edb89d6d..112911138a7b 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -632,6 +632,24 @@ static void clk_core_get_boundaries(struct clk_core *core,
*max_rate = min(*max_rate, clk_user->max_rate);
}
+static bool clk_core_check_boundaries(struct clk_core *core,
+ unsigned long min_rate,
+ unsigned long max_rate)
+{
+ struct clk *user;
+
+ lockdep_assert_held(&prepare_lock);
+
+ if (min_rate > core->max_rate || max_rate < core->min_rate)
+ return false;
+
+ hlist_for_each_entry(user, &core->clks, clks_node)
+ if (min_rate > user->max_rate || max_rate < user->min_rate)
+ return false;
+
+ return true;
+}
+
void clk_hw_set_rate_range(struct clk_hw *hw, unsigned long min_rate,
unsigned long max_rate)
{
@@ -2348,6 +2366,11 @@ int clk_set_rate_range(struct clk *clk, unsigned long min, unsigned long max)
clk->min_rate = min;
clk->max_rate = max;
+ if (!clk_core_check_boundaries(clk->core, min, max)) {
+ ret = -EINVAL;
+ goto out;
+ }
+
rate = clk_core_get_rate_nolock(clk->core);
if (rate < min || rate > max) {
/*
@@ -2376,6 +2399,7 @@ int clk_set_rate_range(struct clk *clk, unsigned long min, unsigned long max)
}
}
+out:
if (clk->exclusive_count)
clk_core_rate_protect(clk->core);
--
2.35.1
