On 2013.01.17 at 12:55 -0500, Jerome Glisse wrote: > On Thu, Jan 17, 2013 at 11:10 AM, Markus Trippelsdorf > <markus@xxxxxxxxxxxxxxx> wrote: > > On 2013.01.17 at 10:44 -0500, Jerome Glisse wrote: > >> On Thu, Jan 17, 2013 at 3:46 AM, Markus Trippelsdorf > >> <markus@xxxxxxxxxxxxxxx> wrote: > >> > On 2013.01.16 at 19:18 -0500, Jerome Glisse wrote: > >> >> On Wed, Jan 16, 2013 at 6:10 PM, Markus Trippelsdorf > >> >> <markus@xxxxxxxxxxxxxxx> wrote: > >> >> > On 2013.01.16 at 17:36 -0500, Alex Deucher wrote: > >> >> >> On Tue, Jan 15, 2013 at 12:03 PM, Markus Trippelsdorf > >> >> >> <markus@xxxxxxxxxxxxxxx> wrote: > >> >> >> > On 2013.01.15 at 17:32 +0100, Markus Trippelsdorf wrote: > >> >> >> >> On 2013.01.15 at 16:26 +0100, Michel Dänzer wrote: > >> >> >> >> > On Die, 201301-15 at 16:23 +0100, Markus Trippelsdorf wrote: > >> >> >> >> > > On 2013.01.15 at 15:43 +0100, Michel Dänzer wrote: > >> >> >> >> > > > On Sam, 2013-01-05 at 11:41 +0100, Markus Trippelsdorf wrote: > >> >> >> >> > > > > On 2012.12.20 at 14:58 +0100, Markus Trippelsdorf wrote: > >> >> >> >> > > > > > > >> >> >> >> > > > > > And just in case it got lost in the noise yesterday: > >> >> >> >> > > > > > The image corruption is caused by Dave's commit: > >> >> >> >> > > > > > > >> >> >> >> > > > > > commit dd54fee7d440c4a9756cce2c24a50c15e4c17ccb > >> >> >> >> > > > > > Author: Dave Airlie <airlied@xxxxxxxxxx> > >> >> >> >> > > > > > Date: Fri Dec 14 21:04:46 2012 +1000 > >> >> >> >> > > > > > > >> >> >> >> > > > > > radeon: fix regression with eviction since evict caching changes > >> >> >> >> > > > > > > >> >> >> >> > > > > > Reverting it 'fixes' the issue. > >> >> >> >> > > > > > >> >> >> >> > > > > Ping. > >> >> >> >> > > > > The issue still happens with todays Linus git tree. > >> >> >> >> > > > > >> >> >> >> > > > Does the corruption also occur with > >> >> >> >> > > > dd54fee7d440c4a9756cce2c24a50c15e4c17ccb applied manually on top of > >> >> >> >> > > > 0d0b3e7443bed6b49cb90fe7ddc4b5578a83a88d? > >> >> >> >> > > > >> >> >> >> > > No. > >> >> >> >> > > >> >> >> >> > So, can you bisect which change between those two actually introduced > >> >> >> >> > the corruption? > >> >> >> > > >> >> >> > The real cause of the image corruption is: > >> >> >> > > >> >> >> > d025e9e2b890db679f1246037bf65bd4be512627 is the first bad commit > >> >> >> > commit d025e9e2b890db679f1246037bf65bd4be512627 > >> >> >> > Author: Jerome Glisse <jglisse@xxxxxxxxxx> > >> >> >> > Date: Thu Nov 29 10:35:41 2012 -0500 > >> >> >> > > >> >> >> > drm/radeon: do not move bo to different placement at each cs > >> >> >> > > >> >> >> > The bo creation placement is where the bo will be. Instead of trying > >> >> >> > to move bo at each command stream let this work to another worker > >> >> >> > thread that will use more advance heuristic. > >> >> >> > > >> >> >> > agd5f: remove leftover unused variable > >> >> >> > > >> >> >> > Signed-off-by: Jerome Glisse <jglisse@xxxxxxxxxx> > >> >> >> > Reviewed-by: Alex Deucher <alexander.deucher@xxxxxxx> > >> >> >> > > >> >> >> > Reverting d025e9e2b890d on top of Linus' tree fixes the issue. > >> >> >> > >> >> >> Can you try this patch from Jerome: > >> >> >> https://bugzilla.kernel.org/attachment.cgi?id=91421 > >> >> > > >> >> > It fixes the corruption, but it degrades performance so much that it > >> >> > takes several seconds to switch virtual desktops under xmonad. And > >> >> > sometimes the website used for the scroll test is stuck for several > >> >> > seconds and unscrollable during that time. > >> >> > > >> >> > -- > >> >> > Markus > >> >> > >> >> What about this patch instead : > >> >> http://people.freedesktop.org/~glisse/0001-drm-radeon-exclude-system-placement-when-validating-.patch > >> > > >> > This one doesn't work: > >> > >> Same address updated patch > >> > >> http://people.freedesktop.org/~glisse/0001-drm-radeon-exclude-system-placement-when-validating-.patch > > > > It still doesn't work unfortunately. Can you please just revert > > d025e9e2b89 for now? Maybe it's better to wait for the next kernel > > release for another solution. > > > > Jan 17 17:05:34 x4 kernel: radeon 0000:01:05.0: GPU lockup CP stall for more than 10000msec > > Jan 17 17:05:34 x4 kernel: radeon 0000:01:05.0: GPU lockup (waiting for 0x000000000000022b last fence id 0x0000000000000224) > > Jan 17 17:05:34 x4 kernel: [drm:radeon_cs_ioctl] *ERROR* Failed to parse relocation -12! > > Jan 17 17:05:34 x4 kernel: [drm:radeon_gem_object_create] *ERROR* Failed to allocate GEM object (7000064, 6, 4096, -12) > > Jan 17 17:05:34 x4 kernel: [drm:radeon_gem_object_create] *ERROR* Failed to allocate GEM object (7000064, 6, 4096, -12) > > Jan 17 17:05:34 x4 kernel: [drm:radeon_gem_object_create] *ERROR* Failed to allocate GEM object (7000064, 6, 4096, -12) > > Jan 17 17:05:34 x4 kernel: radeon 0000:01:05.0: couldn't schedule ib > > Jan 17 17:05:34 x4 kernel: [drm:radeon_cs_ib_chunk] *ERROR* Failed to schedule IB ! > > Jan 17 17:05:34 x4 kernel: [drm:radeon_gem_object_create] *ERROR* Failed to allocate GEM object (7098368, 6, 4096, -12) > > Jan 17 17:05:34 x4 kernel: [drm:radeon_gem_object_create] *ERROR* Failed to allocate GEM object (7278592, 2, 4096, -12) > > > > -- > > Markus > > I am trying to understand why i can't reproduce, what is your desktop > (gnome, kde, ...) what browser ? Is your card agp ? How much ram do > you have ? The desktop is xmonad and the exact browser doesn't matter, because it happens both with Firefox and Chromium. I use my monitor in portrait mode: DVI-0 connected 1050x1680+0+0 left dmesg: Linux version 3.8.0-rc3-00352-gdfdebc2-dirty (markus@x4) (gcc version 4.8.0 20130116 (experimental) (GCC) ) #259 SMP Thu Jan 17 17:11:46 CET 2013 Command line: root=PARTUUID=F61ADF02-9A53-485C-9BD4-3DD2F964C27C init=/sbin/minit fbcon=rotate:3 drm_kms_helper.poll=0 quiet KERNEL supported cpus: AMD AuthenticAMD e820: BIOS-provided physical RAM map: BIOS-e820: [mem 0x0000000000000100-0x000000000009fbff] usable BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved BIOS-e820: [mem 0x00000000000e6000-0x00000000000fffff] reserved BIOS-e820: [mem 0x0000000000100000-0x00000000dfe8ffff] usable BIOS-e820: [mem 0x00000000dfe90000-0x00000000dfea7fff] ACPI data BIOS-e820: [mem 0x00000000dfea8000-0x00000000dfecffff] ACPI NVS BIOS-e820: [mem 0x00000000dfed0000-0x00000000dfefffff] reserved BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved BIOS-e820: [mem 0x0000000100000000-0x000000021fffffff] usable NX (Execute Disable) protection: active SMBIOS 2.5 present. DMI: System manufacturer System Product Name/M4A78T-E, BIOS 3503 04/13/2011 e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved e820: remove [mem 0x000a0000-0x000fffff] usable e820: last_pfn = 0x220000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-EFFFF uncachable F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000000 mask FFFF80000000 write-back 1 base 000080000000 mask FFFFC0000000 write-back 2 base 0000C0000000 mask FFFFE0000000 write-back 3 base 0000F0000000 mask FFFFF8000000 write-combining 4 disabled 5 disabled 6 disabled 7 disabled TOM2: 0000000220000000 aka 8704M x86 PAT enabled: cpu 0, old 0x7010600070106, new 0x7010600070106 e820: last_pfn = 0xdfe90 max_arch_pfn = 0x400000000 initial memory mapped: [mem 0x00000000-0x1fffffff] Base memory trampoline at [ffff880000099000] 99000 size 24576 Using GB pages for direct mapping init_memory_mapping: [mem 0x00000000-0xdfe8ffff] [mem 0x00000000-0xbfffffff] page 1G [mem 0xc0000000-0xdfdfffff] page 2M [mem 0xdfe00000-0xdfe8ffff] page 4k kernel direct mapping tables up to 0xdfe8ffff @ [mem 0x1fffd000-0x1fffffff] init_memory_mapping: [mem 0x100000000-0x21fffffff] [mem 0x100000000-0x1ffffffff] page 1G [mem 0x200000000-0x21fffffff] page 2M kernel direct mapping tables up to 0x21fffffff @ [mem 0xdfe8e000-0xdfe8ffff] ACPI: RSDP 00000000000fb880 00024 (v02 ACPIAM) ACPI: XSDT 00000000dfe90100 0005C (v01 041311 XSDT1656 20110413 MSFT 00000097) ACPI: FACP 00000000dfe90290 000F4 (v03 041311 FACP1656 20110413 MSFT 00000097) ACPI BIOS Bug: Warning: Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20121018/tbfadt-598) ACPI: DSDT 00000000dfe90450 0E6FE (v01 A1152 A1152000 00000000 INTL 20060113) ACPI: FACS 00000000dfea8000 00040 ACPI: APIC 00000000dfe90390 0007C (v01 041311 APIC1656 20110413 MSFT 00000097) ACPI: MCFG 00000000dfe90410 0003C (v01 041311 OEMMCFG 20110413 MSFT 00000097) ACPI: OEMB 00000000dfea8040 00072 (v01 041311 OEMB1656 20110413 MSFT 00000097) ACPI: SRAT 00000000dfe9f450 000E8 (v01 AMD FAM_F_10 00000002 AMD 00000001) ACPI: HPET 00000000dfe9f540 00038 (v01 041311 OEMHPET 20110413 MSFT 00000097) ACPI: SSDT 00000000dfe9f580 0088C (v01 A M I POWERNOW 00000001 AMD 00000001) ACPI: Local APIC address 0xfee00000 [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880217600000-ffff88021f5fffff] on node 0 Zone ranges: DMA [mem 0x00010000-0x00ffffff] DMA32 [mem 0x01000000-0xffffffff] Normal [mem 0x100000000-0x21fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x00010000-0x0009efff] node 0: [mem 0x00100000-0xdfe8ffff] node 0: [mem 0x100000000-0x21fffffff] On node 0 totalpages: 2096671 DMA zone: 64 pages used for memmap DMA zone: 6 pages reserved DMA zone: 3913 pages, LIFO batch:0 DMA32 zone: 14267 pages used for memmap DMA32 zone: 898773 pages, LIFO batch:31 Normal zone: 18432 pages used for memmap Normal zone: 1161216 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8300 base: 0xfed00000 smpboot: Allowing 4 CPUs, 0 hotplug CPUs nr_irqs_gsi: 40 e820: [mem 0xdff00000-0xffefffff] available for PCI devices setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 23 pages/cpu @ffff88021fc00000 s72960 r0 d21248 u524288 pcpu-alloc: s72960 r0 d21248 u524288 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2063902 Kernel command line: root=PARTUUID=F61ADF02-9A53-485C-9BD4-3DD2F964C27C init=/sbin/minit fbcon=rotate:3 drm_kms_helper.poll=0 quiet PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) __ex_table already sorted, skipping sort Memory: 8167048k/8912896k available (4955k kernel code, 526212k absent, 219636k reserved, 3649k data, 444k init) SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Hierarchical RCU implementation. NR_IRQS:4352 nr_irqs:712 16 Extended CMOS year: 2000 Console: colour VGA+ 80x25 console [tty0] enabled hpet clockevent registered tsc: Fast TSC calibration using PIT tsc: Detected 3210.901 MHz processor Calibrating delay loop (skipped), value calculated using timer frequency.. 6424.37 BogoMIPS (lpj=10703003) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 256 tseg: 0000000000 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks LVT offset 0 assigned for vector 0xf9 process: using AMD E400 aware idle routine Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64 tlb_flushall_shift: 4 Freeing SMP alternatives: 16k freed ACPI: Core revision 20121018 ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 smpboot: CPU0: AMD Phenom(tm) II X4 955 Processor (fam: 10, model: 04, stepping: 02) Performance Events: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose events: 0 ... event mask: 000000000000000f MCE: In-kernel MCE decoding enabled. process: System has AMD C1E enabled process: Switch to broadcast mode on CPU1 process: Switch to broadcast mode on CPU2 smpboot: Booting Node 0, Processors #1 #2 #3 OK Brought up 4 CPUs smpboot: Total of 4 processors activated (25697.50 BogoMIPS) process: Switch to broadcast mode on CPU3 process: Switch to broadcast mode on CPU0 devtmpfs: initialized NET: Registered protocol family 16 node 0 link 0: io port [1000, ffffff] TOM: 00000000e0000000 aka 3584M Fam 10h mmconf [mem 0xe0000000-0xefffffff] node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [e0000000, efffffff] ==> none node 0 link 0: mmio [f0000000, fbcfffff] node 0 link 0: mmio [fbd00000, fbefffff] node 0 link 0: mmio [fbf00000, ffefffff] TOM2: 0000000220000000 aka 8704M bus: [bus 00-07] on node 0 link 0 bus: 00 [io 0x0000-0xffff] bus: 00 [mem 0x000a0000-0x000bffff] bus: 00 [mem 0xf0000000-0xffffffff] bus: 00 [mem 0x220000000-0xfcffffffff] ACPI: bus type pci registered PCI: Using configuration type 1 for base access PCI: Using configuration type 1 for extended access bio: create slab <bio-0> at 0 ACPI: Added _OSI(Module Device) ACPI: Added _OSI(Processor Device) ACPI: Added _OSI(3.0 _SCP Extensions) ACPI: Added _OSI(Processor Aggregator Device) ACPI: EC: Look up EC in DSDT ACPI: Executed 3 blocks of module-level executable AML code ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] pci_root PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM pci_root PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08) PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [bus 00-ff] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff] pci_bus 0000:00: root bus resource [mem 0xdff00000-0xdfffffff] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff] pci 0000:00:00.0: [1022:9600] type 00 class 0x060000 pci 0000:00:01.0: [1022:9602] type 01 class 0x060400 pci 0000:00:06.0: [1022:9606] type 01 class 0x060400 pci 0000:00:06.0: PME# supported from D0 D3hot D3cold pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 pci 0000:00:11.0: reg 10: [io 0xc000-0xc007] pci 0000:00:11.0: reg 14: [io 0xb000-0xb003] pci 0000:00:11.0: reg 18: [io 0xa000-0xa007] pci 0000:00:11.0: reg 1c: [io 0x9000-0x9003] pci 0000:00:11.0: reg 20: [io 0x8000-0x800f] pci 0000:00:11.0: reg 24: [mem 0xfbcffc00-0xfbcfffff] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 pci 0000:00:12.0: reg 10: [mem 0xfbcfd000-0xfbcfdfff] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 pci 0000:00:12.1: reg 10: [mem 0xfbcfe000-0xfbcfefff] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 pci 0000:00:12.2: reg 10: [mem 0xfbcff800-0xfbcff8ff] pci 0000:00:12.2: supports D1 D2 pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 pci 0000:00:13.0: reg 10: [mem 0xfbcfb000-0xfbcfbfff] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 pci 0000:00:13.1: reg 10: [mem 0xfbcfc000-0xfbcfcfff] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 pci 0000:00:13.2: reg 10: [mem 0xfbcff400-0xfbcff4ff] pci 0000:00:13.2: supports D1 D2 pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a pci 0000:00:14.1: reg 10: [io 0x0000-0x0007] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 pci 0000:00:14.2: reg 10: [mem 0xfbcf4000-0xfbcf7fff 64bit] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 pci 0000:00:14.5: reg 10: [mem 0xfbcfa000-0xfbcfafff] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 pci 0000:01:05.0: [1002:9614] type 00 class 0x030000 pci 0000:01:05.0: reg 10: [mem 0xf0000000-0xf7ffffff pref] pci 0000:01:05.0: reg 14: [io 0xd000-0xd0ff] pci 0000:01:05.0: reg 18: [mem 0xfbee0000-0xfbeeffff] pci 0000:01:05.0: reg 24: [mem 0xfbd00000-0xfbdfffff] pci 0000:01:05.0: supports D1 D2 pci 0000:01:05.1: [1002:960f] type 00 class 0x040300 pci 0000:01:05.1: reg 10: [mem 0xfbefc000-0xfbefffff] pci 0000:01:05.1: supports D1 D2 pci 0000:00:01.0: PCI bridge to [bus 01] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] pci 0000:00:01.0: bridge window [mem 0xfbd00000-0xfbefffff] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref] pci 0000:02:00.0: [1969:1026] type 00 class 0x020000 pci 0000:02:00.0: reg 10: [mem 0xfbfc0000-0xfbffffff 64bit] pci 0000:02:00.0: reg 18: [io 0xec00-0xec7f] pci 0000:02:00.0: PME# supported from D3hot D3cold pci 0000:00:06.0: PCI bridge to [bus 02] pci 0000:00:06.0: bridge window [io 0xe000-0xefff] pci 0000:00:06.0: bridge window [mem 0xfbf00000-0xfbffffff] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0xdff00000-0xdfffffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode) pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT] ACPI _OSC control for PCIe not granted, disabling ASPM ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled. SCSI subsystem initialized libata version 3.00 loaded. ACPI: bus type usb registered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb Advanced Linux Sound Architecture Driver Initialized. PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] e820: reserve RAM buffer [mem 0xdfe90000-0xdfffffff] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 hpet0: 4 comparators, 32-bit 14.318180 MHz counter Switching to clocksource hpet pnp: PnP ACPI init ACPI: bus type pnp registered system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:01: [dma 4] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active) system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) system 00:07: [io 0x04d0-0x04d1] has been reserved system 00:07: [io 0x040b] has been reserved system 00:07: [io 0x04d6] has been reserved system 00:07: [io 0x0c00-0x0c01] has been reserved system 00:07: [io 0x0c14] has been reserved system 00:07: [io 0x0c50-0x0c51] has been reserved system 00:07: [io 0x0c52] has been reserved system 00:07: [io 0x0c6c] has been reserved system 00:07: [io 0x0c6f] has been reserved system 00:07: [io 0x0cd0-0x0cd1] has been reserved system 00:07: [io 0x0cd2-0x0cd3] has been reserved system 00:07: [io 0x0cd4-0x0cd5] has been reserved system 00:07: [io 0x0cd6-0x0cd7] has been reserved system 00:07: [io 0x0cd8-0x0cdf] has been reserved system 00:07: [io 0x0b00-0x0b3f] has been reserved system 00:07: [io 0x0800-0x089f] has been reserved system 00:07: [io 0x0b00-0x0b0f] has been reserved system 00:07: [io 0x0b20-0x0b3f] has been reserved system 00:07: [io 0x0900-0x090f] has been reserved system 00:07: [io 0x0910-0x091f] has been reserved system 00:07: [io 0xfe00-0xfefe] has been reserved system 00:07: [mem 0xdff00000-0xdfffffff] has been reserved system 00:07: [mem 0xffb80000-0xffbfffff] has been reserved system 00:07: [mem 0xfec10000-0xfec1001f] has been reserved system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) system 00:08: [io 0x0230-0x023f] has been reserved system 00:08: [io 0x0290-0x029f] has been reserved system 00:08: [io 0x0f40-0x0f4f] has been reserved system 00:08: [io 0x0a30-0x0a3f] has been reserved system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) system 00:09: [mem 0xe0000000-0xefffffff] has been reserved system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved system 00:0a: [mem 0x000c0000-0x000cffff] could not be reserved system 00:0a: [mem 0x000e0000-0x000fffff] could not be reserved system 00:0a: [mem 0x00100000-0xdfefffff] could not be reserved system 00:0a: [mem 0xfec00000-0xffffffff] could not be reserved system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered pci 0000:00:01.0: PCI bridge to [bus 01] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] pci 0000:00:01.0: bridge window [mem 0xfbd00000-0xfbefffff] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref] pci 0000:00:06.0: PCI bridge to [bus 02] pci 0000:00:06.0: bridge window [io 0xe000-0xefff] pci 0000:00:06.0: bridge window [mem 0xfbf00000-0xfbffffff] pci 0000:00:14.4: PCI bridge to [bus 03] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] pci_bus 0000:00: resource 8 [mem 0xdff00000-0xdfffffff] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] pci_bus 0000:01: resource 1 [mem 0xfbd00000-0xfbefffff] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf7ffffff 64bit pref] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] pci_bus 0000:02: resource 1 [mem 0xfbf00000-0xfbffffff] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff] pci_bus 0000:03: resource 8 [mem 0xdff00000-0xdfffffff] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff] NET: Registered protocol family 2 TCP established hash table entries: 65536 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 65536 bind 65536) TCP: reno registered UDP hash table entries: 4096 (order: 5, 131072 bytes) UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) NET: Registered protocol family 1 pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled pci 0000:01:05.0: Boot video device PCI: CLS 64 bytes, default 64 PCI-DMA: Using software bounce buffering for IO (SWIOTLB) software IO TLB [mem 0xdbe8e000-0xdfe8e000] (64MB) mapped at [ffff8800dbe8e000-ffff8800dfe8dfff] kvm: Nested Virtualization enabled kvm: Nested Paging enabled LVT offset 1 assigned for vector 0x400 IBS: LVT offset 1 assigned perf: AMD IBS detected (0x0000001f) microcode: CPU0: patch_level=0x010000db microcode: CPU1: patch_level=0x010000db microcode: CPU2: patch_level=0x010000db microcode: CPU3: patch_level=0x010000db microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba 9p: Installing v9fs 9p2000 file system support msgmni has been set to 15951 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler deadline registered (default) ACPI: processor limited to max C-state 1 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [drm] Initialized drm 1.1.0 20060810 [drm] radeon defaulting to kernel modesetting. [drm] radeon kernel modesetting enabled. [drm] initializing kernel modesetting (RS780 0x1002:0x9614 0x1043:0x834D). [drm] register mmio base: 0xFBEE0000 [drm] register mmio size: 65536 ATOM BIOS: 113 radeon 0000:01:05.0: VRAM: 128M 0x00000000C0000000 - 0x00000000C7FFFFFF (128M used) radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF [drm] Detected VRAM RAM=128M, BAR=128M [drm] RAM width 32bits DDR [TTM] Zone kernel: Available graphics memory: 4083532 kiB [TTM] Zone dma32: Available graphics memory: 2097152 kiB [TTM] Initializing pool allocator [TTM] Initializing DMA pool allocator [drm] radeon: 128M of VRAM memory ready [drm] radeon: 512M of GTT memory ready. [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [drm] Driver supports precise vblank timestamp query. [drm] radeon: irq initialized. [drm] GART: num cpu pages 131072, num gpu pages 131072 [drm] Loading RS780 Microcode [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000). radeon 0000:01:05.0: WB enabled radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000a0000c00 and cpu addr 0xffff8802163adc00 radeon 0000:01:05.0: fence driver on ring 3 use gpu addr 0x00000000a0000c0c and cpu addr 0xffff8802163adc0c radeon 0000:01:05.0: setting latency timer to 64 [drm] ring test on 0 succeeded in 0 usecs [drm] ring test on 3 succeeded in 1 usecs [drm] ib test on ring 0 succeeded in 0 usecs [drm] ib test on ring 3 succeeded in 0 usecs [drm] Radeon Display Connectors [drm] Connector 0: [drm] VGA-1 [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [drm] Encoders: [drm] CRT1: INTERNAL_KLDSCP_DAC1 [drm] Connector 1: [drm] DVI-D-1 [drm] HPD3 [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c [drm] Encoders: [drm] DFP3: INTERNAL_KLDSCP_LVTMA [drm] radeon: power management initialized [drm] fb mappable at 0xF0142000 [drm] vram apper at 0xF0000000 [drm] size 7299072 [drm] fb depth is 24 [drm] pitch is 6912 fbcon: radeondrmfb (fb0) is primary device Console: switching to colour frame buffer device 131x105 radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device radeon 0000:01:05.0: registered panic notifier [drm] Initialized radeon 2.28.0 20080528 for 0000:01:05.0 on minor 0 loop: module loaded ahci 0000:00:11.0: version 3.0 ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 abar m1024@0xfbcffc00 port 0xfbcffd00 irq 22 ata2: SATA max UDMA/133 abar m1024@0xfbcffc00 port 0xfbcffd80 irq 22 ata3: SATA max UDMA/133 abar m1024@0xfbcffc00 port 0xfbcffe00 irq 22 ata4: SATA max UDMA/133 abar m1024@0xfbcffc00 port 0xfbcffe80 irq 22 ata5: SATA max UDMA/133 abar m1024@0xfbcffc00 port 0xfbcfff00 irq 22 ata6: SATA max UDMA/133 abar m1024@0xfbcffc00 port 0xfbcfff80 irq 22 scsi6 : pata_atiixp scsi7 : pata_atiixp ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14 ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15 tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx> ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ehci-pci 0000:00:12.2: EHCI Host Controller ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 QUIRK: Enable AMD PLL fix ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround ehci-pci 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround ehci-pci 0000:00:12.2: debug port 1 ehci-pci 0000:00:12.2: irq 17, io mem 0xfbcff800 ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ehci-pci 0000:00:13.2: EHCI Host Controller ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround ehci-pci 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround ehci-pci 0000:00:13.2: debug port 1 ehci-pci 0000:00:13.2: irq 19, io mem 0xfbcff400 ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd 0000:00:12.0: OHCI Host Controller ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:12.0: irq 16, io mem 0xfbcfd000 hub 3-0:1.0: USB hub found hub 3-0:1.0: 3 ports detected ohci_hcd 0000:00:12.1: OHCI Host Controller ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:12.1: irq 16, io mem 0xfbcfe000 ata7.00: ATAPI: HL-DT-STDVD-RAM GH22NP20, 1.03, max UDMA/66 ata7.00: configured for UDMA/66 hub 4-0:1.0: USB hub found hub 4-0:1.0: 3 ports detected ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 ohci_hcd 0000:00:13.0: irq 18, io mem 0xfbcfb000 hub 5-0:1.0: USB hub found hub 5-0:1.0: 3 ports detected ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6 ohci_hcd 0000:00:13.1: irq 18, io mem 0xfbcfc000 hub 6-0:1.0: USB hub found hub 6-0:1.0: 3 ports detected ohci_hcd 0000:00:14.5: OHCI Host Controller ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7 ohci_hcd 0000:00:14.5: irq 18, io mem 0xfbcfa000 ata4: SATA link down (SStatus 0 SControl 300) ata5: SATA link down (SStatus 0 SControl 300) ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) ata1: SATA link down (SStatus 0 SControl 300) ata3.00: ATA-8: OCZ VERTEX-TURBO, 1.7, max UDMA/133 ata3.00: 62533296 sectors, multi 1: LBA48 NCQ (depth 31/32), AA ata3.00: failed to get Identify Device Data, Emask 0x1 ata2.00: ATA-8: ST1500DL003-9VT16L, CC32, max UDMA/133 ata2.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata2.00: failed to get Identify Device Data, Emask 0x1 ata2.00: failed to get Identify Device Data, Emask 0x1 ata2.00: configured for UDMA/133 ata3.00: failed to get Identify Device Data, Emask 0x1 ata3.00: configured for UDMA/133 scsi 1:0:0:0: Direct-Access ATA ST1500DL003-9VT1 CC32 PQ: 0 ANSI: 5 sd 1:0:0:0: Attached scsi generic sg0 type 0 sd 1:0:0:0: [sda] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB) scsi 2:0:0:0: Direct-Access ATA OCZ VERTEX-TURBO 1.7 PQ: 0 ANSI: 5 sd 2:0:0:0: Attached scsi generic sg1 type 0 sd 1:0:0:0: [sda] Write Protect is off sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdb] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB) sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: [sdb] Write Protect is off sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA scsi 6:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH22NP20 1.03 PQ: 0 ANSI: 5 sdb: sdb1 sdb2 sd 2:0:0:0: [sdb] Attached SCSI disk sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray cdrom: Uniform CD-ROM driver Revision: 3.20 sr 6:0:0:0: Attached scsi CD-ROM sr0 sr 6:0:0:0: Attached scsi generic sg2 type 5 sda: unknown partition table sd 1:0:0:0: [sda] Attached SCSI disk hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected usbcore: registered new interface driver usblp Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. i8042: PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mousedev: PS/2 mouse device common for all mice rtc_cmos 00:02: RTC can wake from S4 rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs i2c /dev entries driver EDAC MC: Ver: 3.0.0 AMD64 EDAC driver v3.4.0 EDAC amd64: DRAM ECC enabled. EDAC amd64: F10h detected (node 0). EDAC MC: DCT0 chip selects: EDAC amd64: MC: 0: 1024MB 1: 1024MB EDAC amd64: MC: 2: 1024MB 3: 1024MB EDAC amd64: MC: 4: 0MB 5: 0MB EDAC amd64: MC: 6: 0MB 7: 0MB EDAC MC: DCT1 chip selects: EDAC amd64: MC: 0: 1024MB 1: 1024MB EDAC amd64: MC: 2: 1024MB 3: 1024MB EDAC amd64: MC: 4: 0MB 5: 0MB EDAC amd64: MC: 6: 0MB 7: 0MB EDAC amd64: using x4 syndromes. EDAC amd64: MCT channel count: 2 EDAC amd64: CS0: Unbuffered DDR3 RAM EDAC amd64: CS1: Unbuffered DDR3 RAM EDAC amd64: CS2: Unbuffered DDR3 RAM EDAC amd64: CS3: Unbuffered DDR3 RAM EDAC MC0: Giving out device to 'amd64_edac' 'F10h': DEV 0000:00:18.2 EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED) cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver usbhid usbhid: USB HID core driver snd_hda_intel 0000:01:05.1: setting latency timer to 64 hda-codec: No codec parser is available usbcore: registered new interface driver snd-usb-audio Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (16384 buckets, 65536 max) ctnetlink v0.93: registering with nfnetlink. ip_tables: (C) 2000-2006 Netfilter Core Team TCP: cubic registered NET: Registered protocol family 17 9pnet: Installing 9P2000 support registered taskstats version 1 rtc_cmos 00:02: setting system clock to 2013-01-17 16:12:01 UTC (1358439121) acpi-cpufreq: overriding BIOS provided _PSD data ALSA device list: #0: HDA ATI SB at 0xfbcf4000 irq 16 #1: HDA ATI HDMI at 0xfbefc000 irq 19 EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 8:18. devtmpfs: mounted Freeing unused kernel memory: 444k freed Write protecting the kernel read-only data: 8192k Freeing unused kernel memory: 1184k freed Freeing unused kernel memory: 200k freed EXT4-fs (sdb2): re-mounted. Opts: (null) usb 4-2: new full-speed USB device number 2 using ohci_hcd EXT4-fs (sda): mounted filesystem with ordered data mode. Opts: (null) tsc: Refined TSC clocksource calibration: 3210.827 MHz Switching to clocksource tsc ATL1E 0000:02:00.0: irq 40 for MSI/MSI-X logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.1-2/input2 input: Logitech Unifying Device. Wireless PID:101b as /devices/pci0000:00/0000:00:12.1/usb4/4-2/4-2:1.2/0003:046D:C52B.0003/input/input0 logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:101b] on usb-0000:00:12.1-2:1 usb 4-3: new low-speed USB device number 3 using ohci_hcd input: HID 046a:0011 as /devices/pci0000:00/0000:00:12.1/usb4/4-3/4-3:1.0/input/input1 hid-generic 0003:046A:0011.0005: input,hidraw2: USB HID v1.10 Keyboard [HID 046a:0011] on usb-0000:00:12.1-3/input0 ATL1E 0000:02:00.0 eth0: NIC Link is Up <100 Mbps Full Duplex> Adding 4194300k swap on /var/cache/swapfile.img. Priority:-1 extents:9 across:629080060k -- Markus _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel
