From: Xin Ji <xji@xxxxxxxxxxxxxxxx> Send DPCD command to downstream before anx7625 power down, let downstream monitor enter into standby mode. Signed-off-by: Xin Ji <xji@xxxxxxxxxxxxxxxx> Signed-off-by: Hsin-Yi Wang <hsinyi@xxxxxxxxxxxx> Reviewed-by: Hsin-Yi Wang <hsinyi@xxxxxxxxxxxx> --- v3->v4: Use common DP_AUX_NATIVE_READ/WRITE Previously in: https://patchwork.kernel.org/project/dri-devel/patch/1f36f8bf0a48fb2bba17bacec23700e58c1d407d.1641891874.git.xji@xxxxxxxxxxxxxxxx/ --- drivers/gpu/drm/bridge/analogix/anx7625.c | 42 +++++++++++++++++++---- drivers/gpu/drm/bridge/analogix/anx7625.h | 2 -- 2 files changed, 35 insertions(+), 9 deletions(-) diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c index 76662fce4ce61d..17b23940549a42 100644 --- a/drivers/gpu/drm/bridge/analogix/anx7625.c +++ b/drivers/gpu/drm/bridge/analogix/anx7625.c @@ -129,6 +129,23 @@ static int anx7625_reg_write(struct anx7625_data *ctx, return ret; } +static int anx7625_reg_block_write(struct anx7625_data *ctx, + struct i2c_client *client, + u8 reg_addr, u8 len, u8 *buf) +{ + int ret; + struct device *dev = &client->dev; + + i2c_access_workaround(ctx, client); + + ret = i2c_smbus_write_i2c_block_data(client, reg_addr, len, buf); + if (ret < 0) + dev_err(dev, "write i2c block failed id=%x\n:%x", + client->addr, reg_addr); + + return ret; +} + static int anx7625_write_or(struct anx7625_data *ctx, struct i2c_client *client, u8 offset, u8 mask) @@ -214,8 +231,8 @@ static int wait_aux_op_finish(struct anx7625_data *ctx) return 0; } -static int anx7625_aux_dpcd_read(struct anx7625_data *ctx, - u32 address, u8 len, u8 *buf) +static int anx7625_aux_dpcd_trans(struct anx7625_data *ctx, u8 op, + u32 address, u8 len, u8 *buf) { struct device *dev = &ctx->client->dev; int ret; @@ -231,8 +248,7 @@ static int anx7625_aux_dpcd_read(struct anx7625_data *ctx, addrm = (address >> 8) & 0xFF; addrh = (address >> 16) & 0xFF; - cmd = DPCD_CMD(len, DPCD_READ); - cmd = ((len - 1) << 4) | 0x09; + cmd = DPCD_CMD(len, op); /* Set command and length */ ret = anx7625_reg_write(ctx, ctx->i2c.rx_p0_client, @@ -246,6 +262,9 @@ static int anx7625_aux_dpcd_read(struct anx7625_data *ctx, ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client, AP_AUX_ADDR_19_16, addrh); + if (op == DP_AUX_NATIVE_WRITE) + ret |= anx7625_reg_block_write(ctx, ctx->i2c.rx_p0_client, + AP_AUX_BUFF_START, len, buf); /* Enable aux access */ ret |= anx7625_write_or(ctx, ctx->i2c.rx_p0_client, AP_AUX_CTRL_STATUS, AP_AUX_CTRL_OP_EN); @@ -255,14 +274,17 @@ static int anx7625_aux_dpcd_read(struct anx7625_data *ctx, return -EIO; } - usleep_range(2000, 2100); - ret = wait_aux_op_finish(ctx); if (ret) { dev_err(dev, "aux IO error: wait aux op finish.\n"); return ret; } + /* Write done */ + if (op == DP_AUX_NATIVE_WRITE) + return 0; + + /* Read done, read out dpcd data */ ret = anx7625_reg_block_read(ctx, ctx->i2c.rx_p0_client, AP_AUX_BUFF_START, len, buf); if (ret < 0) { @@ -845,7 +867,7 @@ static int anx7625_hdcp_enable(struct anx7625_data *ctx) } /* Read downstream capability */ - anx7625_aux_dpcd_read(ctx, 0x68028, 1, &bcap); + anx7625_aux_dpcd_trans(ctx, DP_AUX_NATIVE_READ, 0x68028, 1, &bcap); if (!(bcap & 0x01)) { pr_warn("downstream not support HDCP 1.4, cap(%x).\n", bcap); return 0; @@ -918,6 +940,7 @@ static void anx7625_dp_stop(struct anx7625_data *ctx) { struct device *dev = &ctx->client->dev; int ret; + u8 data; DRM_DEV_DEBUG_DRIVER(dev, "stop dp output\n"); @@ -929,6 +952,11 @@ static void anx7625_dp_stop(struct anx7625_data *ctx) ret |= anx7625_write_and(ctx, ctx->i2c.tx_p2_client, 0x08, 0x7f); ret |= anx7625_video_mute_control(ctx, 1); + + dev_dbg(dev, "notify downstream enter into standby\n"); + /* Downstream monitor enter into standby mode */ + data = 2; + ret |= anx7625_aux_dpcd_trans(ctx, DP_AUX_NATIVE_WRITE, 0x000600, 1, &data); if (ret < 0) DRM_DEV_ERROR(dev, "IO error : mute video fail\n"); diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.h b/drivers/gpu/drm/bridge/analogix/anx7625.h index 56165f5b254c14..64a8ab56529404 100644 --- a/drivers/gpu/drm/bridge/analogix/anx7625.h +++ b/drivers/gpu/drm/bridge/analogix/anx7625.h @@ -242,8 +242,6 @@ #define AP_AUX_COMMAND 0x27 /* com+len */ #define LENGTH_SHIFT 4 -#define DPCD_READ 0x09 -#define DPCD_WRITE 0x08 #define DPCD_CMD(len, cmd) ((((len) - 1) << LENGTH_SHIFT) | (cmd)) /* Bit 0&1: 3D video structure */ -- 2.35.0.rc2.247.g8bbb082509-goog
