Host transfer in DSI master will invoke only when the DSI commands
sent from DSI devices like DSI Panel or DSI bridges and this host
transfer wouldn't invoke I2C based DSI bridge drivers.
Handling DSI host initialization in transfer calls might miss the
controller setup for I2C configured DSI bridges.
So, move the DSI initialization from transfer to bridge pre_enable
as the bridge enable API as it is common across all classes of DSI
device drivers.
Signed-off-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx>
---
Changes for v5:
- init dsi in pre_enable
Changes for v4:
- none
Changes for v3:
- new patch
drivers/gpu/drm/exynos/exynos_drm_dsi.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
index 891b5c984f0c..1c3633f9982d 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
@@ -1391,6 +1391,13 @@ static void exynos_dsi_atomic_pre_enable(struct drm_bridge *bridge,
}
dsi->state |= DSIM_STATE_ENABLED;
+
+ if (!(dsi->state & DSIM_STATE_INITIALIZED)) {
+ ret = exynos_dsi_init(dsi);
+ if (ret)
+ return;
+ dsi->state |= DSIM_STATE_INITIALIZED;
+ }
}
static void exynos_dsi_atomic_enable(struct drm_bridge *bridge,
@@ -1539,13 +1546,6 @@ static ssize_t exynos_dsi_host_transfer(struct mipi_dsi_host *host,
if (!(dsi->state & DSIM_STATE_ENABLED))
return -EINVAL;
- if (!(dsi->state & DSIM_STATE_INITIALIZED)) {
- ret = exynos_dsi_init(dsi);
- if (ret)
- return ret;
- dsi->state |= DSIM_STATE_INITIALIZED;
- }
-
ret = mipi_dsi_create_packet(&xfer.packet, msg);
if (ret < 0)
return ret;
--
2.25.1
