Re: [RFC PATCH] drm/radeon: increase d3 delay to 20 ms during switcheroo poweron

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Jan 2, 2013 at 10:38 AM, Maarten Lankhorst
<maarten.lankhorst@xxxxxxxxxxxxx> wrote:
> vga-switcheroo with apple-gmux does not switch correctly on my system. The PCI
> configuration space is not restored correctly, resulting in MSI not working after switch.
>
> Only useful item in dmesg is:
>
> [   33.922807] radeon 0000:01:00.0: Refused to change power state, currently in D3
>
> I did some testing, dumping the difference in ms between first succesful switch
> from D3 to D0, and it seems that there is slightly more than 20 ms difference when
> the device is re-enabled through vga-switcheroo.
>
> So bump the re-enable d3 delay to 20 ms to handle this, which fixes msi not working
> on my system after switcheroo-ing.

I guess if it fixes it...  Has anyone seen similar problems on non-mac
systems?  What is the delay normally set to?  It seems pretty
innocuous other than potentially adding a little extra latency.  Do
you think it makes sense to make it more like a quirk and only apply
it to problematic systems or just apply across the board?

Alex

>
> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxx>
>
> ---
>
> This is a RFC patch since I feel what I'm doing is done in a hackish way,
> but it seems only the D3->D0 transition during switcheroo enable is affected,
> other transitions like suspend/resume and switcheroo poweroff seem unaffected.
>
> diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c
> index 5515921..8816958 100644
> --- a/drivers/gpu/drm/radeon/radeon_device.c
> +++ b/drivers/gpu/drm/radeon/radeon_device.c
> @@ -910,10 +910,19 @@ static void radeon_switcheroo_set_state(struct pci_dev *pdev, enum vga_switchero
>         struct drm_device *dev = pci_get_drvdata(pdev);
>         pm_message_t pmm = { .event = PM_EVENT_SUSPEND };
>         if (state == VGA_SWITCHEROO_ON) {
> +               unsigned d3_delay = dev->pdev->d3_delay;
> +
>                 printk(KERN_INFO "radeon: switched on\n");
>                 /* don't suspend or resume card normally */
>                 dev->switch_power_state = DRM_SWITCH_POWER_CHANGING;
> +
> +               if (dev->pdev->d3_delay < 20)
> +                       dev->pdev->d3_delay = 20;
> +
>                 radeon_resume_kms(dev);
> +
> +               dev->pdev->d3_delay = d3_delay;
> +
>                 dev->switch_power_state = DRM_SWITCH_POWER_ON;
>                 drm_kms_helper_poll_enable(dev);
>         } else {
>
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel


[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux