Hi Dmitry On Fri, 26 Nov 2021 at 00:32, Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> wrote: > > During the pre_enable time the previous bridge (e.g. DSI host) might be > not initialized yet. Move the regulator enablement and bridge init to > te enable callback (and consequently regulator disblement to disable). Except that in the enable callback the DSI host has video enabled too, so the data lanes may be in HS mode too, and the bridge may not be prepared to accept that during power on / initialisation. That means you've got a race condition over how quickly the composition hardware starts producing pixel data vs when this enable callback is called. I suspect that is why we had [1] for the rare case when the race condition failed. There's also seems to be no guarantee that a host can do LP commands between HS video packets (eg sunxi [2]) This is the same issue that was being hacked around in [3], and is one of the questions I'd raised back in July [4]. The DSI support is broken when it comes to accommodating initialisation sequences, but in trying to ensure all possible sequences can be accomodated, all currently proposed solutions have been shot down. Some platforms have worked around it by powering up the DSI host in mode_set (dw-mipi-dsi), others have broken the bridge chain apart so their pre_enable gets called first (exynos and currently vc4) except that approach is broken for the atomic API. There is a need for some form of resolution, even if it is only documenting the correct hack to implement in the DSI host driver. Hacking bridge or panel drivers to try and workaround it seems wrong. Dave [1] https://lists.freedesktop.org/archives/dri-devel/2021-September/322119.html [2] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c#n776 [3] https://lists.freedesktop.org/archives/dri-devel/2021-November/332003.html [4] https://lists.freedesktop.org/archives/dri-devel/2021-July/313576.html > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> > --- > drivers/gpu/drm/bridge/tc358762.c | 20 ++++++++++---------- > 1 file changed, 10 insertions(+), 10 deletions(-) > > diff --git a/drivers/gpu/drm/bridge/tc358762.c b/drivers/gpu/drm/bridge/tc358762.c > index 7104828024fd..ebdf771a1e49 100644 > --- a/drivers/gpu/drm/bridge/tc358762.c > +++ b/drivers/gpu/drm/bridge/tc358762.c > @@ -64,7 +64,7 @@ struct tc358762 { > struct drm_connector connector; > struct regulator *regulator; > struct drm_bridge *panel_bridge; > - bool pre_enabled; > + bool enabled; > int error; > }; > > @@ -125,26 +125,26 @@ static int tc358762_init(struct tc358762 *ctx) > return tc358762_clear_error(ctx); > } > > -static void tc358762_post_disable(struct drm_bridge *bridge) > +static void tc358762_disable(struct drm_bridge *bridge) > { > struct tc358762 *ctx = bridge_to_tc358762(bridge); > int ret; > > /* > - * The post_disable hook might be called multiple times. > + * The disable hook might be called multiple times. > * We want to avoid regulator imbalance below. > */ > - if (!ctx->pre_enabled) > + if (!ctx->enabled) > return; > > - ctx->pre_enabled = false; > + ctx->enabled = false; > > ret = regulator_disable(ctx->regulator); > if (ret < 0) > dev_err(ctx->dev, "error disabling regulators (%d)\n", ret); > } > > -static void tc358762_pre_enable(struct drm_bridge *bridge) > +static void tc358762_enable(struct drm_bridge *bridge) > { > struct tc358762 *ctx = bridge_to_tc358762(bridge); > int ret; > @@ -157,7 +157,7 @@ static void tc358762_pre_enable(struct drm_bridge *bridge) > if (ret < 0) > dev_err(ctx->dev, "error initializing bridge (%d)\n", ret); > > - ctx->pre_enabled = true; > + ctx->enabled = true; > } > > static int tc358762_attach(struct drm_bridge *bridge, > @@ -170,8 +170,8 @@ static int tc358762_attach(struct drm_bridge *bridge, > } > > static const struct drm_bridge_funcs tc358762_bridge_funcs = { > - .post_disable = tc358762_post_disable, > - .pre_enable = tc358762_pre_enable, > + .disable = tc358762_disable, > + .enable = tc358762_enable, > .attach = tc358762_attach, > }; > > @@ -218,7 +218,7 @@ static int tc358762_probe(struct mipi_dsi_device *dsi) > mipi_dsi_set_drvdata(dsi, ctx); > > ctx->dev = dev; > - ctx->pre_enabled = false; > + ctx->enabled = false; > > /* TODO: Find out how to get dual-lane mode working */ > dsi->lanes = 1; > -- > 2.33.0 >
