Re: [PATCH 1/2] drm: exynos: dsi: Convert to bridge driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Marek,

On Wed, Nov 24, 2021 at 8:23 PM Marek Szyprowski
<m.szyprowski@xxxxxxxxxxx> wrote:
>
> Hi Jagan,
>
> On 24.11.2021 06:32, Jagan Teki wrote:
> > On Mon, Nov 22, 2021 at 9:34 PM Marek Szyprowski
> > <m.szyprowski@xxxxxxxxxxx> wrote:
> >> On 22.11.2021 16:07, Marek Szyprowski wrote:
> >>> On 22.11.2021 15:55, Jagan Teki wrote:
> >>>> On Mon, Nov 22, 2021 at 7:59 PM Jagan Teki
> >>>> <jagan@xxxxxxxxxxxxxxxxxxxx> wrote:
> >>>>> On Mon, Nov 22, 2021 at 7:51 PM Jagan Teki
> >>>>> <jagan@xxxxxxxxxxxxxxxxxxxx> wrote:
> >>>>>> On Mon, Nov 22, 2021 at 7:45 PM Marek Szyprowski
> >>>>>> <m.szyprowski@xxxxxxxxxxx> wrote:
> >>>>>>> On 22.11.2021 08:06, Jagan Teki wrote:
> >>>>>>>> Some display panels would come up with a non-DSI output, those
> >>>>>>>> can have an option to connect the DSI host by means of interface
> >>>>>>>> bridge converter.
> >>>>>>>>
> >>>>>>>> This DSI to non-DSI interface bridge converter would requires
> >>>>>>>> DSI Host to handle drm bridge functionalities in order to DSI
> >>>>>>>> Host to Interface bridge.
> >>>>>>>>
> >>>>>>>> This patch convert the existing to a drm bridge driver with a
> >>>>>>>> built-in encoder support for compatibility with existing
> >>>>>>>> component drivers.
> >>>>>>>>
> >>>>>>>> Signed-off-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx>
> >>>>>>>> ---
> >>>>>>>> Note:
> >>>>>>>> Hi Marek Szyprowski,
> >>>>>>>>
> >>>>>>>> Please test this on Panel and Bridge hardware.
> >>>>>>> I don't have good news, t crashes:
> >>>>>>>
> >>>>>>> [drm] Exynos DRM: using 13800000.decon device for DMA mapping
> >>>>>>> operations
> >>>>>>> exynos-drm exynos-drm: bound 13800000.decon (ops decon_component_ops)
> >>>>>>> exynos-drm exynos-drm: bound 13880000.decon (ops decon_component_ops)
> >>>>>>> exynos-drm exynos-drm: bound 13930000.mic (ops
> >>>>>>> exynos_mic_component_ops)
> >>>>>>> [drm:drm_bridge_attach] *ERROR* failed to attach bridge
> >>>>>>> /soc@0/dsi@13900000 to encoder TMDS-67: -22
> >>>>>>> exynos-drm exynos-drm: failed to bind 13900000.dsi (ops
> >>>>>>> exynos_dsi_component_ops): -22
> >>>>>>> Internal error: synchronous external abort: 96000210 [#1] PREEMPT SMP
> >>>>>>> Modules linked in:
> >>>>>>> CPU: 2 PID: 74 Comm: kworker/u16:1 Not tainted 5.16.0-rc1+ #4141
> >>>>>>> Hardware name: Samsung TM2E board (DT)
> >>>>>>> Workqueue: events_unbound deferred_probe_work_func
> >>>>>>> pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
> >>>>>>> pc : decon_atomic_disable+0x58/0xd4
> >>>>>>> lr : decon_atomic_disable+0x28/0xd4
> >>>>>>> sp : ffff80001390b940
> >>>>>>> x29: ffff80001390b940 x28: ffff80001259a000 x27: ffff000027f39e80
> >>>>>>> input: stmfts as
> >>>>>>> /devices/platform/soc@0/14ed0000.hsi2c/i2c-3/3-0049/input/input0
> >>>>>>> x26: 00000000ffffffea x25: ffff000025a40280 x24: 0000000000000001
> >>>>>>> x23: ffff800011b55f98 x22: ffff0000315dc000 x21: ffff00002695d100
> >>>>>>> x20: ffff000027e7a080 x19: ffff0000315e6000 x18: 0000000000000000
> >>>>>>> x17: 645f736f6e797865 x16: 2073706f28206973 x15: 0000000000028ee0
> >>>>>>> x14: 0000000000000028 x13: 0000000000000001 x12: 0000000000000040
> >>>>>>> x11: ffff000023c18920 x10: ffff000023c18922 x9 : ffff8000126352f0
> >>>>>>> x8 : ffff000023c00270 x7 : 0000000000000000 x6 : ffff000023c00268
> >>>>>>> x5 : ffff000027e7a3a0 x4 : 0000000000000001 x3 : ffff000027e7a080
> >>>>>>> x2 : 0000000000000024 x1 : ffff800013bc8024 x0 : ffff0000246117c0
> >>>>>>> Call trace:
> >>>>>>>     decon_atomic_disable+0x58/0xd4
> >>>>>>>     decon_unbind+0x1c/0x3c
> >>>>>>>     component_unbind+0x38/0x60
> >>>>>>>     component_bind_all+0x16c/0x25c
> >>>>>>>     exynos_drm_bind+0x104/0x1bc
> >>>>>>>     try_to_bring_up_master+0x164/0x1d0
> >>>>>>>     __component_add+0xa8/0x174
> >>>>>>>     component_add+0x14/0x20
> >>>>>>>     hdmi_probe+0x438/0x710
> >>>>>>>     platform_probe+0x68/0xe0
> >>>>>>>     really_probe.part.0+0x9c/0x31c
> >>>>>>>     __driver_probe_device+0x98/0x144
> >>>>>>>     driver_probe_device+0xc8/0x160
> >>>>>>>     __device_attach_driver+0xb8/0x120
> >>>>>>>     bus_for_each_drv+0x78/0xd0
> >>>>>>>     __device_attach+0xd8/0x180
> >>>>>>>     device_initial_probe+0x14/0x20
> >>>>>>>     bus_probe_device+0x9c/0xa4
> >>>>>>>     deferred_probe_work_func+0x88/0xc4
> >>>>>>>     process_one_work+0x288/0x6f0
> >>>>>>>     worker_thread+0x74/0x470
> >>>>>>>     kthread+0x188/0x194
> >>>>>>>     ret_from_fork+0x10/0x20
> >>>>>>> Code: 11002042 f9481c61 531e7442 8b020021 (88dffc21)
> >>>>>>> ---[ end trace d73aff585b108954 ]---
> >>>>>>> Kernel panic - not syncing: synchronous external abort: Fatal
> >>>>>>> exception
> >>>>>>> SMP: stopping secondary CPUs
> >>>>>>> Kernel Offset: disabled
> >>>>>>> CPU features: 0x2,300071c2,00000846
> >>>>>>> Memory Limit: none
> >>>>>>> ---[ end Kernel panic - not syncing: synchronous external abort:
> >>>>>>> Fatal
> >>>>>>> exception ]---
> >>>>>> Is this with Bridge or normal DSI panel?
> >>>>> Can you apply this patch and check?
> >>>>> https://protect2.fireeye.com/v1/url?k=aad62f08-f54d1627-aad7a447-0cc47a31cdf8-ea5858ddb7f0ecfe&q=1&e=2d730862-2c56-4988-a252-8febd02da578&u=https%3A%2F%2Fgithub.com%2Fopenedev%2Flinux%2Fcommit%2F412f226acd774356e8188c9e62b653672926ee0d
> >>>>>
> >>>> Any news on this? just asking in case if you missed it.
> >>> It is somehow better. System doesn't crash, but the DRM is not bound:
> >>>
> >>> # cat /sys/kernel/debug/device_component/exynos-drm
> >>> master name                                            status
> >>> -------------------------------------------------------------
> >>> exynos-drm                                          not bound
> >>>
> >>> device name                                            status
> >>> -------------------------------------------------------------
> >>> 13800000.decon                                      not bound
> >>> 13880000.decon                                      not bound
> >>> 13930000.mic                                        not bound
> >>> (unknown)                                      not registered
> >>> (unknown)                                      not registered
> >>>
> >> Well, I also checked a much simpler case, the Samsung Trats board
> >> (arch/arm/boot/dts/exynos4210-trats.dts). It has only Exynos FIMD
> >> (CRTC), Exynos DSI (encoder) and s6e8aa0 panel. No bridges at all. With
> >> only the $subject patch applied I got the following errors:
> >>
> >> exynos4-fb 11c00000.fimd: Adding to iommu group 0
> >> OF: graph: no port node found in /soc/fimd@11c00000
> >> [drm] Exynos DRM: using 11c00000.fimd device for DMA mapping operations
> >> exynos-drm exynos-drm: bound 11c00000.fimd (ops fimd_component_ops)
> >> [drm:drm_bridge_attach] *ERROR* failed to attach bridge
> >> /soc/dsi@11c80000 to encoder TMDS-50: -22
> >> exynos-drm exynos-drm: failed to bind 11c80000.dsi (ops
> >> exynos_dsi_component_ops): -22
> >> exynos-drm exynos-drm: master bind failed: -22
> >> exynos-drm: probe of exynos-drm failed with error -22
> >> lima 13000000.gpu: gp - mali400 version major 1 minor 1
> >> lima 13000000.gpu: pp0 - mali400 version major 1 minor 1
> >> lima 13000000.gpu: pp1 - mali400 version major 1 minor 1
> >> lima 13000000.gpu: pp2 - mali400 version major 1 minor 1
> >> lima 13000000.gpu: pp3 - mali400 version major 1 minor 1
> >> lima 13000000.gpu: l2 cache 128K, 4-way, 64byte cache line, 64bit
> >> external bus
> >> lima 13000000.gpu: bus rate = 200000000
> >> lima 13000000.gpu: mod rate = 100000000
> >> lima 13000000.gpu: dev_pm_opp_set_regulators: no regulator (mali) found: -19
> >> [drm] Initialized lima 1.1.0 20191231 for 13000000.gpu on minor 0
> >>
> >>
> >> After applying "drm: exynos: dsi: Add component only once DSI device
> >> attached" the Exynos DRM is not even tried to bind:
> >>
> >> # dmesg | grep drm
> >> [    2.495898] [drm] Initialized lima 1.1.0 20191231 for 13000000.gpu on
> >> minor 0
> > Can you confirm, does linux-next work with panel, downstream bridge devices?
> >
> > downstream bridge has, panel-simple out port (I2C based and non-I2C)
>
> What do you mean by downstream bridge devices?

Bridge devices connected from Exynos Host.

>
> I've just checked and two mentioned in this thread boards: TM2e and
> Trats properly display image with current (20211124) linux-next.
>
> However I've noticed that the Arndale board
> (arch/arm/boot/dts/exynos5250-arndale.dts), which also uses Exynos DSI
> with some bridges, gives no display with current next. I will try to
> bisect and find when it got broken.

I understand why it is broken. Would you please come irc for further
discussion on this?
#dri-devel
jagan_

Thaks,
Jagan.



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux