On Sun, 2021-10-10 at 17:40 +0530, Animesh Manna wrote: > DPCD register definition added to check and enable panel replay > capability of the sink. > > Signed-off-by: Animesh Manna <animesh.manna@xxxxxxxxx> > --- > include/drm/drm_dp_helper.h | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h > index b52df4db3e8f..8a2b929c3f88 100644 > --- a/include/drm/drm_dp_helper.h > +++ b/include/drm/drm_dp_helper.h > @@ -541,6 +541,9 @@ struct drm_panel; > /* DFP Capability Extension */ > #define DP_DFP_CAPABILITY_EXTENSION_SUPPORT 0x0a3 /* 2.0 */ > > +#define DP_PANEL_REPLAY_CAP 0x0b0 > +# define PANEL_REPLAY_SUPPORT (1 << 0) Missing bit 1, that is very important when panel do not support selective update panel replay needs to act like PSR1 when it is sets it needs to act like PSR2. > + > /* Link Configuration */ > #define DP_LINK_BW_SET 0x100 > # define DP_LINK_RATE_TABLE 0x00 /* eDP 1.4 */ > @@ -709,6 +712,9 @@ struct drm_panel; > #define DP_BRANCH_DEVICE_CTRL 0x1a1 > # define DP_BRANCH_DEVICE_IRQ_HPD (1 << 0) > > +#define PANEL_REPLAY_CONFIG 0x1b0 > +# define PANEL_REPLAY_ENABLE (1 << 0) All other bits are also important, for the errors ones we have PSR counter parts and your are missing the error status register. > + > #define DP_PAYLOAD_ALLOCATE_SET 0x1c0 > #define DP_PAYLOAD_ALLOCATE_START_TIME_SLOT 0x1c1 > #define DP_PAYLOAD_ALLOCATE_TIME_SLOT_COUNT 0x1c2
