[PATCH v2 1/2] drm/msm/dp: Add support for SC7280 eDP

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Sankeerth Billakanti <sbillaka@xxxxxxxxxxxxxx>

The eDP controller on SC7280 is similar to the eDP/DP controllers
supported by the current driver implementation.

SC7280 supports one EDP and one DP controller which can operate
concurrently.

The following are some required changes to support eDP on sc7280:
1. SC7280 eDP support in the dp_display driver.
2. ASSR support programming for the sink device.
3. SSC support programming for the sink device.

Signed-off-by: Sankeerth Billakanti <quic_sbillaka@xxxxxxxxxxx>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c |  4 ++--
 drivers/gpu/drm/msm/dp/dp_ctrl.c               | 20 ++++++++++++++++++--
 drivers/gpu/drm/msm/dp/dp_display.c            | 10 +++++++++-
 3 files changed, 29 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
index ce6f32a..516cc19 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
@@ -856,9 +856,9 @@ static const struct dpu_intf_cfg sm8150_intf[] = {
 };
 
 static const struct dpu_intf_cfg sc7280_intf[] = {
-	INTF_BLK("intf_0", INTF_0, 0x34000, INTF_DP, 0, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 24, 25),
+	INTF_BLK("intf_0", INTF_0, 0x34000, INTF_DP, 1, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 24, 25),
 	INTF_BLK("intf_1", INTF_1, 0x35000, INTF_DSI, 0, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 26, 27),
-	INTF_BLK("intf_5", INTF_5, 0x39000, INTF_EDP, 0, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 22, 23),
+	INTF_BLK("intf_5", INTF_5, 0x39000, INTF_DP, 0, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 22, 23),
 };
 
 /*************************************************************
diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.c b/drivers/gpu/drm/msm/dp/dp_ctrl.c
index 62e75dc..9fea49c 100644
--- a/drivers/gpu/drm/msm/dp/dp_ctrl.c
+++ b/drivers/gpu/drm/msm/dp/dp_ctrl.c
@@ -119,7 +119,7 @@ void dp_ctrl_push_idle(struct dp_ctrl *dp_ctrl)
 static void dp_ctrl_config_ctrl(struct dp_ctrl_private *ctrl)
 {
 	u32 config = 0, tbd;
-	u8 *dpcd = ctrl->panel->dpcd;
+	const u8 *dpcd = ctrl->panel->dpcd;
 
 	/* Default-> LSCLK DIV: 1/4 LCLK  */
 	config |= (2 << DP_CONFIGURATION_CTRL_LSCLK_DIV_SHIFT);
@@ -1228,7 +1228,9 @@ static int dp_ctrl_link_train(struct dp_ctrl_private *ctrl,
 			int *training_step)
 {
 	int ret = 0;
+	const u8 *dpcd = ctrl->panel->dpcd;
 	u8 encoding = DP_SET_ANSI_8B10B;
+	u8 ssc, assr;
 	struct dp_link_info link_info = {0};
 
 	dp_ctrl_config_ctrl(ctrl);
@@ -1238,9 +1240,21 @@ static int dp_ctrl_link_train(struct dp_ctrl_private *ctrl,
 	link_info.capabilities = DP_LINK_CAP_ENHANCED_FRAMING;
 
 	dp_aux_link_configure(ctrl->aux, &link_info);
+
+	if (dpcd[DP_MAX_DOWNSPREAD] & DP_MAX_DOWNSPREAD_0_5) {
+		ssc = DP_SPREAD_AMP_0_5;
+		drm_dp_dpcd_write(ctrl->aux, DP_DOWNSPREAD_CTRL, &ssc, 1);
+	}
+
 	drm_dp_dpcd_write(ctrl->aux, DP_MAIN_LINK_CHANNEL_CODING_SET,
 				&encoding, 1);
 
+	if (dpcd[DP_EDP_CONFIGURATION_CAP] & DP_ALTERNATE_SCRAMBLER_RESET_CAP) {
+		assr = DP_ALTERNATE_SCRAMBLER_RESET_ENABLE;
+		drm_dp_dpcd_write(ctrl->aux, DP_EDP_CONFIGURATION_SET,
+				&assr, 1);
+	}
+
 	ret = dp_ctrl_link_train_1(ctrl, training_step);
 	if (ret) {
 		DRM_ERROR("link training #1 failed. ret=%d\n", ret);
@@ -1312,9 +1326,11 @@ static int dp_ctrl_enable_mainlink_clocks(struct dp_ctrl_private *ctrl)
 	struct dp_io *dp_io = &ctrl->parser->io;
 	struct phy *phy = dp_io->phy;
 	struct phy_configure_opts_dp *opts_dp = &dp_io->phy_opts.dp;
+	const u8 *dpcd = ctrl->panel->dpcd;
 
 	opts_dp->lanes = ctrl->link->link_params.num_lanes;
 	opts_dp->link_rate = ctrl->link->link_params.rate / 100;
+	opts_dp->ssc = dpcd[DP_MAX_DOWNSPREAD] & DP_MAX_DOWNSPREAD_0_5;
 	dp_ctrl_set_clock_rate(ctrl, DP_CTRL_PM, "ctrl_link",
 					ctrl->link->link_params.rate * 1000);
 
@@ -1406,7 +1422,7 @@ void dp_ctrl_host_deinit(struct dp_ctrl *dp_ctrl)
 
 static bool dp_ctrl_use_fixed_nvid(struct dp_ctrl_private *ctrl)
 {
-	u8 *dpcd = ctrl->panel->dpcd;
+	const u8 *dpcd = ctrl->panel->dpcd;
 
 	/*
 	 * For better interop experience, used a fixed NVID=0x8000
diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
index c867745..c16311b 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -144,8 +144,16 @@ static const struct msm_dp_config sc8180x_dp_cfg = {
 	.num_descs = 3,
 };
 
+static const struct msm_dp_config sc7280_dp_cfg = {
+	.descs = (struct msm_dp_desc[]) {
+		{ .io_start = 0x0aea0000, .connector_type = DRM_MODE_CONNECTOR_eDP },
+	},
+	.num_descs = 1,
+};
+
 static const struct of_device_id dp_dt_match[] = {
 	{ .compatible = "qcom,sc7180-dp", .data = &sc7180_dp_cfg },
+	{ .compatible = "qcom,sc7280-edp", .data = &sc7280_dp_cfg },
 	{ .compatible = "qcom,sc8180x-dp", .data = &sc8180x_dp_cfg },
 	{ .compatible = "qcom,sc8180x-edp", .data = &sc8180x_dp_cfg },
 	{}
@@ -1440,7 +1448,7 @@ void msm_dp_irq_postinstall(struct msm_dp *dp_display)
 
 	dp_hpd_event_setup(dp);
 
-	dp_add_event(dp, EV_HPD_INIT_SETUP, 0, 100);
+	dp_add_event(dp, EV_HPD_INIT_SETUP, 0, 1);
 }
 
 void msm_dp_debugfs_init(struct msm_dp *dp_display, struct drm_minor *minor)
-- 
The Qualcomm Innovatin Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux