Il 21/09/21 17:52, jason-jh.lin ha scritto:
Add MERGE engine file:
MERGE module is used to merge two slice-per-line inputs
into one side-by-side output.
Signed-off-by: jason-jh.lin <jason-jh.lin@xxxxxxxxxxxx>
---
rebase on series [1]
[1] drm/mediatek: add support for mediatek SOC MT8192
- https://patchwork.kernel.org/project/linux-mediatek/list/?series=529489
---
drivers/gpu/drm/mediatek/Makefile | 1 +
drivers/gpu/drm/mediatek/mtk_disp_drv.h | 8 +
drivers/gpu/drm/mediatek/mtk_disp_merge.c | 239 ++++++++++++++++++++
drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 16 ++
drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h | 1 +
drivers/gpu/drm/mediatek/mtk_drm_drv.c | 4 +-
drivers/gpu/drm/mediatek/mtk_drm_drv.h | 1 +
7 files changed, 269 insertions(+), 1 deletion(-)
create mode 100644 drivers/gpu/drm/mediatek/mtk_disp_merge.c
diff --git a/drivers/gpu/drm/mediatek/Makefile b/drivers/gpu/drm/mediatek/Makefile
index 29098d7c8307..a38e88e82d12 100644
--- a/drivers/gpu/drm/mediatek/Makefile
+++ b/drivers/gpu/drm/mediatek/Makefile
@@ -4,6 +4,7 @@ mediatek-drm-y := mtk_disp_aal.o \
mtk_disp_ccorr.o \
mtk_disp_color.o \
mtk_disp_gamma.o \
+ mtk_disp_merge.o \
mtk_disp_ovl.o \
mtk_disp_rdma.o \
mtk_drm_crtc.o \
diff --git a/drivers/gpu/drm/mediatek/mtk_disp_drv.h b/drivers/gpu/drm/mediatek/mtk_disp_drv.h
index 86c3068894b1..a33b13fe2b6e 100644
--- a/drivers/gpu/drm/mediatek/mtk_disp_drv.h
+++ b/drivers/gpu/drm/mediatek/mtk_disp_drv.h
@@ -55,6 +55,14 @@ void mtk_gamma_set_common(void __iomem *regs, struct drm_crtc_state *state);
void mtk_gamma_start(struct device *dev);
void mtk_gamma_stop(struct device *dev);
+int mtk_merge_clk_enable(struct device *dev);
+void mtk_merge_clk_disable(struct device *dev);
+void mtk_merge_config(struct device *dev, unsigned int width,
+ unsigned int height, unsigned int vrefresh,
+ unsigned int bpc, struct cmdq_pkt *cmdq_pkt);
+void mtk_merge_start(struct device *dev);
+void mtk_merge_stop(struct device *dev);
+
void mtk_ovl_bgclr_in_on(struct device *dev);
void mtk_ovl_bgclr_in_off(struct device *dev);
void mtk_ovl_bypass_shadow(struct device *dev);
diff --git a/drivers/gpu/drm/mediatek/mtk_disp_merge.c b/drivers/gpu/drm/mediatek/mtk_disp_merge.c
new file mode 100644
index 000000000000..b05e1df79c3d
--- /dev/null
+++ b/drivers/gpu/drm/mediatek/mtk_disp_merge.c
@@ -0,0 +1,239 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2021 MediaTek Inc.
+ */
+
+#include <linux/clk.h>
+#include <linux/component.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/soc/mediatek/mtk-cmdq.h>
+
+#include "mtk_drm_ddp_comp.h"
+#include "mtk_drm_drv.h"
+#include "mtk_disp_drv.h"
+
+#define DISP_REG_MERGE_CTRL 0x000
+#define MERGE_EN 1
+#define DISP_REG_MERGE_CFG_0 0x010
+#define DISP_REG_MERGE_CFG_4 0x020
+#define DISP_REG_MERGE_CFG_10 0x038
+/* no swap */
+#define SWAP_MODE 0
+#define FLD_SWAP_MODE GENMASK(4, 0)
+#define DISP_REG_MERGE_CFG_12 0x040
+#define CFG_10_10_1PI_2PO_BUF_MODE 6
+#define CFG_10_10_2PI_2PO_BUF_MODE 8
+#define FLD_CFG_MERGE_MODE GENMASK(4, 0)
+#define DISP_REG_MERGE_CFG_24 0x070
+#define DISP_REG_MERGE_CFG_25 0x074
+#define DISP_REG_MERGE_CFG_36 0x0a0
+#define ULTRA_EN BIT(0)
+#define PREULTRA_EN BIT(4)
+#define DISP_REG_MERGE_CFG_37 0x0a4
+/* 0: Off, 1: SRAM0, 2: SRAM1, 3: SRAM0 + SRAM1 */
+#define BUFFER_MODE 3
+#define FLD_BUFFER_MODE GENMASK(1, 0)
+/*
+ * For the ultra and preultra settings, 6us ~ 9us is experience value
+ * and the maximum frequency of mmsys clock is 594MHz.
+ */
+#define DISP_REG_MERGE_CFG_40 0x0b0
+/* 6 us, 594M pixel/sec */
+#define ULTRA_TH_LOW (6 * 594)
+/* 8 us, 594M pixel/sec */
+#define ULTRA_TH_HIGH (8 * 594)
+#define FLD_ULTRA_TH_LOW GENMASK(15, 0)
+#define FLD_ULTRA_TH_HIGH GENMASK(31, 16)
+#define DISP_REG_MERGE_CFG_41 0x0b4
+/* 8 us, 594M pixel/sec */
+#define PREULTRA_TH_LOW (8 * 594)
+/* 9 us, 594M pixel/sec */
+#define PREULTRA_TH_HIGH (9 * 594)
+#define FLD_PREULTRA_TH_LOW GENMASK(15, 0)
+#define FLD_PREULTRA_TH_HIGH GENMASK(31, 16)
+
+struct mtk_disp_merge {
+ void __iomem *regs;
+ struct clk *clk;
+ struct clk *async_clk;
+ struct cmdq_client_reg cmdq_reg;
+ bool fifo_en;
+};
+
+void mtk_merge_start(struct device *dev)
+{
+ struct mtk_disp_merge *priv = dev_get_drvdata(dev);
+
+ writel(MERGE_EN, priv->regs + DISP_REG_MERGE_CTRL);
+}
+
+void mtk_merge_stop(struct device *dev)
+{
+ struct mtk_disp_merge *priv = dev_get_drvdata(dev);
+
+ writel(0x0, priv->regs + DISP_REG_MERGE_CTRL);
+}
+
+static void mtk_merge_fifo_setting(struct mtk_disp_merge *priv,
+ struct cmdq_pkt *cmdq_pkt)
+{
+ mtk_ddp_write(cmdq_pkt, ULTRA_EN | PREULTRA_EN,
+ &priv->cmdq_reg, priv->regs, DISP_REG_MERGE_CFG_36);
+
+ mtk_ddp_write_mask(cmdq_pkt, BUFFER_MODE,
+ &priv->cmdq_reg, priv->regs, DISP_REG_MERGE_CFG_37,
+ FLD_BUFFER_MODE);
+
+ mtk_ddp_write_mask(cmdq_pkt, ULTRA_TH_LOW | ULTRA_TH_HIGH << 16,
+ &priv->cmdq_reg, priv->regs, DISP_REG_MERGE_CFG_40,
+ FLD_ULTRA_TH_LOW | FLD_ULTRA_TH_HIGH);
+
+ mtk_ddp_write_mask(cmdq_pkt, PREULTRA_TH_LOW | PREULTRA_TH_HIGH << 16,
+ &priv->cmdq_reg, priv->regs, DISP_REG_MERGE_CFG_41,
+ FLD_PREULTRA_TH_LOW | FLD_PREULTRA_TH_HIGH);
+}
+
+void mtk_merge_config(struct device *dev, unsigned int w,
+ unsigned int h, unsigned int vrefresh,
+ unsigned int bpc, struct cmdq_pkt *cmdq_pkt)
+{
+ struct mtk_disp_merge *priv = dev_get_drvdata(dev);
+ unsigned int mode = CFG_10_10_1PI_2PO_BUF_MODE;
+
+ if (!h || !w) {
+ dev_err(dev, "%s: input width(%d) or height(%d) is invalid\n", __func__, w, h);
+ return;
+ }
+
+ if (priv->fifo_en) {
+ mtk_merge_fifo_setting(priv, cmdq_pkt);
+ mode = CFG_10_10_2PI_2PO_BUF_MODE;
+ }
+
+ mtk_ddp_write(cmdq_pkt, h << 16 | w, &priv->cmdq_reg, priv->regs,
+ DISP_REG_MERGE_CFG_0);
+ mtk_ddp_write(cmdq_pkt, h << 16 | w, &priv->cmdq_reg, priv->regs,
+ DISP_REG_MERGE_CFG_4);
+ mtk_ddp_write(cmdq_pkt, h << 16 | w, &priv->cmdq_reg, priv->regs,
+ DISP_REG_MERGE_CFG_24);
+ mtk_ddp_write(cmdq_pkt, h << 16 | w, &priv->cmdq_reg, priv->regs,
+ DISP_REG_MERGE_CFG_25);
+ mtk_ddp_write_mask(cmdq_pkt, SWAP_MODE, &priv->cmdq_reg, priv->regs,
+ DISP_REG_MERGE_CFG_10, FLD_SWAP_MODE);
+ mtk_ddp_write_mask(cmdq_pkt, mode, &priv->cmdq_reg, priv->regs,
+ DISP_REG_MERGE_CFG_12, FLD_CFG_MERGE_MODE);
+}
+
+int mtk_merge_clk_enable(struct device *dev)
+{
+ int ret = 0;
+ struct mtk_disp_merge *priv = dev_get_drvdata(dev);
+
+ ret = clk_prepare_enable(priv->clk);
+ if (ret)
+ pr_err("merge clk prepare enable failed\n");
If you failed to enable this clock, I take it as the hardware won't work or
won't work as expected, hence you should return a failure before trying to
call prepare_enable for async_clk.
+ ret = clk_prepare_enable(priv->async_clk);
+ if (ret)
+ pr_err("async clk prepare enable failed\n");
+
You should also return a failure here but, before that, you should clean up
the state by calling clk_disable_unprepare(priv->clk), or you will leave it
enabled, eventually getting a hardware fault later on (which may or may not
result in a board reboot), or other sorts of unexpected states.
At least, you will get issues with the refcount for "clk" and/or "async_clk".
Please fix that.
Also, please use dev_err or, more appropriately, DRM_ERROR instead or pr_err.
+ return ret;
+}
+
+void mtk_merge_clk_disable(struct device *dev)
+{
+ struct mtk_disp_merge *priv = dev_get_drvdata(dev);
+
+ clk_disable_unprepare(priv->async_clk); > + clk_disable_unprepare(priv->clk);
+}
+
+static int mtk_disp_merge_bind(struct device *dev, struct device *master,
+ void *data)
+{
+ return 0;
+}
+
+static void mtk_disp_merge_unbind(struct device *dev, struct device *master,
+ void *data)
+{
+}
+
+static const struct component_ops mtk_disp_merge_component_ops = {
+ .bind = mtk_disp_merge_bind,
+ .unbind = mtk_disp_merge_unbind,
+};
+
+static int mtk_disp_merge_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct resource *res;
+ struct mtk_disp_merge *priv;
+ int ret;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ priv->regs = devm_ioremap_resource(dev, res);
+ if (IS_ERR(priv->regs)) {
+ dev_err(dev, "failed to ioremap merge\n");
+ return PTR_ERR(priv->regs);
+ }
+
+ priv->clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(priv->clk)) {
+ dev_err(dev, "failed to get merge clk\n");
+ return PTR_ERR(priv->clk);
+ }
+
+ priv->async_clk = of_clk_get(dev->of_node, 1);
+ if (IS_ERR(priv->async_clk)) {
+ ret = PTR_ERR(priv->async_clk);
+ dev_dbg(dev, "No merge async clock: %d\n", ret);
+ priv->async_clk = NULL;
+ }
+
You are using devm_clk_get for the first clock, of_clk_get for the second one:
what's the reason for that?
Also, async_clk seems to be optional... and there's the right API for you!
If you use devm_clk_get_optional(), you won't have to manually assign NULL
to priv->async_clk, as that's API handled... and you'll get a failure if
the return value is an error that's not -ENOENT (so, it'll fail if the clock
was declared in DT, but there was an error acquiring it).
Please use devm_clk_get_optional() here.
Regards,
- Angelo
