Add mt8195 vdosys0 clock driver name and routing table to the driver data of mtk-mmsys. Signed-off-by: jason-jh.lin <jason-jh.lin@xxxxxxxxxxxx> --- This patch is base on [1] [1] soc: mediatek: mmsys: add mt8192 mmsys support - https://patchwork.kernel.org/project/linux-mediatek/list/?series=524857 The vdosys1 impelmentation patch [2] [2] soc: mediatek: add mtk-mmsys support for mt8195 vdosys1 - https://patchwork.kernel.org/project/linux-mediatek/patch/20210906071539.12953-7-nancy.lin@xxxxxxxxxxxx/ ---
Hello Jason, thanks for the patch! However, there are a few things to improve:
drivers/soc/mediatek/mt8195-mmsys.h | 114 +++++++++++++++++++++++++ drivers/soc/mediatek/mtk-mmsys.c | 11 +++ include/linux/soc/mediatek/mtk-mmsys.h | 9 ++ 3 files changed, 134 insertions(+) create mode 100644 drivers/soc/mediatek/mt8195-mmsys.h diff --git a/drivers/soc/mediatek/mt8195-mmsys.h b/drivers/soc/mediatek/mt8195-mmsys.h new file mode 100644 index 000000000000..0c97a5f016c1 --- /dev/null +++ b/drivers/soc/mediatek/mt8195-mmsys.h @@ -0,0 +1,114 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#ifndef __SOC_MEDIATEK_MT8195_MMSYS_H +#define __SOC_MEDIATEK_MT8195_MMSYS_H + +#define MT8195_VDO0_OVL_MOUT_EN 0xf14 +#define MT8195_MOUT_DISP_OVL0_TO_DISP_RDMA0 BIT(0) +#define MT8195_MOUT_DISP_OVL0_TO_DISP_WDMA0 BIT(1) +#define MT8195_MOUT_DISP_OVL0_TO_DISP_OVL1 BIT(2) +#define MT8195_MOUT_DISP_OVL1_TO_DISP_RDMA1 BIT(4) +#define MT8195_MOUT_DISP_OVL1_TO_DISP_WDMA1 BIT(5) +#define MT8195_MOUT_DISP_OVL1_TO_DISP_OVL0 BIT(6) + +#define MT8195_VDO0_SEL_IN 0xf34 +#define MT8195_SEL_IN_VPP_MERGE_FROM_DSC_WRAP0_OUT (0 << 0)
Bitshifting 0 by 0 bits == 0, so this is simply 0.
+#define MT8195_SEL_IN_VPP_MERGE_FROM_DISP_DITHER1 (1 << 0)
I would write 0x1 here
+#define MT8195_SEL_IN_VPP_MERGE_FROM_VDO1_VIRTUAL0 (2 << 0)
....and 0x2 here: bitshifting of 0 bits makes little sense.
+#define MT8195_SEL_IN_DSC_WRAP0_IN_FROM_DISP_DITHER0 (0 << 4)
Bitshifting 0 by 4 bits is still 0, so this is again 0. This is repeated too many times, so I will not list it for all of the occurrences.
+#define MT8195_SEL_IN_DSC_WRAP0_IN_FROM_VPP_MERGE (1 << 4)
This is BIT(4).
+#define MT8195_SEL_IN_DSC_WRAP1_IN_FROM_DISP_DITHER1 (0 << 5) > +#define MT8195_SEL_IN_DSC_WRAP1_IN_FROM_VPP_MERGE (1 << 5)
...and this is BIT(5)
+#define MT8195_SEL_IN_SINA_VIRTUAL0_FROM_VPP_MERGE (0 << 8) +#define MT8195_SEL_IN_SINA_VIRTUAL0_FROM_DSC_WRAP1_OUT (1 << 8)
BIT(8)
+#define MT8195_SEL_IN_SINB_VIRTUAL0_FROM_DSC_WRAP0_OUT (0 << 9) +#define MT8195_SEL_IN_DP_INTF0_FROM_DSC_WRAP1_OUT (0 << 12) +#define MT8195_SEL_IN_DP_INTF0_FROM_VPP_MERGE (1 << 12)
BIT(12)
+#define MT8195_SEL_IN_DP_INTF0_FROM_VDO1_VIRTUAL0 (2 << 12)
BIT(13) ... and please, use the BIT(nr) macro for all these bit definitions, it's way more readable like that. Regards, - Angelo
