RE: [RFC v3 4/5] drm/exynos: add rotator ipp driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




> -----Original Message-----
> From: Eunchul Kim [mailto:chulspro.kim@xxxxxxxxxxx]
> Sent: Wednesday, December 12, 2012 6:26 PM
> To: Inki Dae
> Cc: dri-devel@xxxxxxxxxxxxxxxxxxxxx; jy0.jeon@xxxxxxxxxxx;
> yj44.cho@xxxxxxxxxxx; jmock.shin@xxxxxxxxxxx; jaejoon.seo@xxxxxxxxxxx;
> kyungmin.park@xxxxxxxxxxx; sw0312.kim@xxxxxxxxxxx; Joonyoung Shim
> Subject: Re: [RFC v3 4/5] drm/exynos: add rotator ipp driver
> 
> Thank's your comment.
> 
> I answer your comment. please check that.
> 
> Thank's
> 
> BR
> Eunchul Kim
> 
> On 12/12/2012 05:29 PM, Inki Dae wrote:
> >
> >
> >> -----Original Message-----
> >> From: Eunchul Kim [mailto:chulspro.kim@xxxxxxxxxxx]
> >> Sent: Wednesday, December 12, 2012 4:35 PM
> >> To: dri-devel@xxxxxxxxxxxxxxxxxxxxx; inki.dae@xxxxxxxxxxx
> >> Cc: jy0.jeon@xxxxxxxxxxx; yj44.cho@xxxxxxxxxxx; jmock.shin@xxxxxxxxxxx;
> >> jaejoon.seo@xxxxxxxxxxx; kyungmin.park@xxxxxxxxxxx;
> >> chulspro.kim@xxxxxxxxxxx
> >> Subject: [RFC v3 4/5] drm/exynos: add rotator ipp driver
> >>
> >> Rotator supports rotation/crop/flip and input/output DMA operations
> >> Rotator ipp driver supports 90,180,270 degree rotaion and vertical,
> >> horizontal flip.
> >> and has some limitations(source and destination format have to be same,
> no
> >> scaler)
> >>
> >> Signed-off-by: Eunchul Kim <chulspro.kim@xxxxxxxxxxx>
> >> Signed-off-by: Youngjun Cho <yj44.cho@xxxxxxxxxxx>
> >> ---
> >>   drivers/gpu/drm/exynos/Kconfig              |    7 +
> >>   drivers/gpu/drm/exynos/Makefile             |    1 +
> >>   drivers/gpu/drm/exynos/exynos_drm_drv.c     |   15 +
> >>   drivers/gpu/drm/exynos/exynos_drm_drv.h     |    1 +
> >>   drivers/gpu/drm/exynos/exynos_drm_rotator.c |  829
> >> +++++++++++++++++++++++++++
> >>   drivers/gpu/drm/exynos/exynos_drm_rotator.h |   13 +
> >>   drivers/gpu/drm/exynos/regs-rotator.h       |   73 +++
> >>   7 files changed, 939 insertions(+), 0 deletions(-)
> >>   create mode 100644 drivers/gpu/drm/exynos/exynos_drm_rotator.c
> >>   create mode 100644 drivers/gpu/drm/exynos/exynos_drm_rotator.h
> >>   create mode 100644 drivers/gpu/drm/exynos/regs-rotator.h
> >>
> >> diff --git a/drivers/gpu/drm/exynos/Kconfig
> >> b/drivers/gpu/drm/exynos/Kconfig
> >> index 4915ab6..4860835 100644
> >> --- a/drivers/gpu/drm/exynos/Kconfig
> >> +++ b/drivers/gpu/drm/exynos/Kconfig
> >> @@ -57,3 +57,10 @@ config DRM_EXYNOS_FIMC
> >>   	depends on DRM_EXYNOS_IPP
> >>   	help
> >>   	  Choose this option if you want to use Exynos FIMC for DRM.
> >> +
> >> +config DRM_EXYNOS_ROTATOR
> >> +	bool "Exynos DRM Rotator"
> >> +	depends on DRM_EXYNOS_IPP
> >> +	help
> >> +	  Choose this option if you want to use Exynos Rotator for DRM.
> >> +
> >> diff --git a/drivers/gpu/drm/exynos/Makefile
> >> b/drivers/gpu/drm/exynos/Makefile
> >> index 9710024..3b70668 100644
> >> --- a/drivers/gpu/drm/exynos/Makefile
> >> +++ b/drivers/gpu/drm/exynos/Makefile
> >> @@ -18,5 +18,6 @@ exynosdrm-$(CONFIG_DRM_EXYNOS_VIDI)	+=
> >> exynos_drm_vidi.o
> >>   exynosdrm-$(CONFIG_DRM_EXYNOS_G2D)	+= exynos_drm_g2d.o
> >>   exynosdrm-$(CONFIG_DRM_EXYNOS_IPP)	+= exynos_drm_ipp.o
> >>   exynosdrm-$(CONFIG_DRM_EXYNOS_FIMC)	+= exynos_drm_fimc.o
> >> +exynosdrm-$(CONFIG_DRM_EXYNOS_ROTATOR)	+= exynos_drm_rotator.o
> >>
> >>   obj-$(CONFIG_DRM_EXYNOS)		+= exynosdrm.o
> >> diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.c
> >> b/drivers/gpu/drm/exynos/exynos_drm_drv.c
> >> index 73f02ac..09d884b 100644
> >> --- a/drivers/gpu/drm/exynos/exynos_drm_drv.c
> >> +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.c
> >> @@ -378,6 +378,12 @@ static int __init exynos_drm_init(void)
> >>   		goto out_fimc;
> >>   #endif
> >>
> >> +#ifdef CONFIG_DRM_EXYNOS_ROTATOR
> >> +	ret = platform_driver_register(&rotator_driver);
> >> +	if (ret < 0)
> >> +		goto out_rotator;
> >> +#endif
> >> +
> >>   #ifdef CONFIG_DRM_EXYNOS_IPP
> >>   	ret = platform_driver_register(&ipp_driver);
> >>   	if (ret < 0)
> >> @@ -406,6 +412,11 @@ out_drm:
> >>   out_ipp:
> >>   #endif
> >>
> >> +#ifdef CONFIG_DRM_EXYNOS_ROTATOR
> >> +	platform_driver_unregister(&rotator_driver);
> >> +out_rotator:
> >> +#endif
> >> +
> >>   #ifdef CONFIG_DRM_EXYNOS_FIMC
> >>   	platform_driver_unregister(&fimc_driver);
> >>   out_fimc:
> >> @@ -451,6 +462,10 @@ static void __exit exynos_drm_exit(void)
> >>   	platform_driver_unregister(&ipp_driver);
> >>   #endif
> >>
> >> +#ifdef CONFIG_DRM_EXYNOS_ROTATOR
> >> +	platform_driver_unregister(&rotator_driver);
> >> +#endif
> >> +
> >>   #ifdef CONFIG_DRM_EXYNOS_FIMC
> >>   	platform_driver_unregister(&fimc_driver);
> >>   #endif
> >> diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.h
> >> b/drivers/gpu/drm/exynos/exynos_drm_drv.h
> >> index 14f9490..a74e37c 100644
> >> --- a/drivers/gpu/drm/exynos/exynos_drm_drv.h
> >> +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.h
> >> @@ -353,5 +353,6 @@ extern struct platform_driver
> >> exynos_drm_common_hdmi_driver;
> >>   extern struct platform_driver vidi_driver;
> >>   extern struct platform_driver g2d_driver;
> >>   extern struct platform_driver fimc_driver;
> >> +extern struct platform_driver rotator_driver;
> >>   extern struct platform_driver ipp_driver;
> >>   #endif
> >> diff --git a/drivers/gpu/drm/exynos/exynos_drm_rotator.c
> >> b/drivers/gpu/drm/exynos/exynos_drm_rotator.c
> >> new file mode 100644
> >> index 0000000..121569c
> >> --- /dev/null
> >> +++ b/drivers/gpu/drm/exynos/exynos_drm_rotator.c
> >> @@ -0,0 +1,829 @@
> >> +/*
> >> + * Copyright (C) 2012 Samsung Electronics Co.Ltd
> >> + * Authors:
> >> + *	YoungJun Cho <yj44.cho@xxxxxxxxxxx>
> >> + *	Eunchul Kim <chulspro.kim@xxxxxxxxxxx>
> >> + *
> >> + * This program is free software; you can redistribute it and/or
> modify
> >> + * it under the terms of the GNU General Public License version 2 as
> >> + * published by the Free Software Foundationr
> >> + */
> >> +
> >> +#include <linux/kernel.h>
> >> +#include <linux/module.h>
> >> +#include <linux/err.h>
> >> +#include <linux/interrupt.h>
> >> +#include <linux/io.h>
> >> +#include <linux/platform_device.h>
> >> +#include <linux/clk.h>
> >> +#include <linux/pm_runtime.h>
> >> +
> >> +#include <drm/drmP.h>
> >> +#include <drm/exynos_drm.h>
> >> +#include "regs-rotator.h"
> >> +#include "exynos_drm.h"
> >> +#include "exynos_drm_ipp.h"
> >> +
> >> +/*
> >> + * Rotator supports image crop/rotator and input/output DMA
operations.
> >> + * input DMA reads image data from the memory.
> >> + * output DMA writes image data to memory.
> >> + */
> >> +
> >> +#define get_rot_context(dev)
> >> 	platform_get_drvdata(to_platform_device(dev))
> >> +#define get_ctx_from_ippdrv(ippdrv)	container_of(ippdrv,\
> >> +					struct rot_context, ippdrv);
> >> +#define rot_read(offset)		readl(rot->regs + (offset))
> >> +#define rot_write(cfg, offset)	writel(cfg, rot->regs + (offset))
> >> +
> >> +enum rot_irq_status {
> >> +	ROT_IRQ_STATUS_COMPLETE	= 8,
> >> +	ROT_IRQ_STATUS_ILLEGAL	= 9,
> >> +};
> >> +
> >> +/*
> >> + * A structure of limitation.
> >> + *
> >> + * @min_w: minimum width.
> >> + * @min_h: minimum height.
> >> + * @max_w: maximum width.
> >> + * @max_h: maximum height.
> >> + * @align: align size.
> >> + */
> >> +struct rot_limit {
> >> +	u32	min_w;
> >> +	u32	min_h;
> >> +	u32	max_w;
> >> +	u32	max_h;
> >> +	u32	align;
> >> +};
> >> +
> >> +/*
> >> + * A structure of limitation table.
> >> + *
> >> + * @ycbcr420_2p: case of YUV.
> >> + * @rgb888: case of RGB.
> >> + */
> >> +struct rot_limit_table {
> >> +	struct rot_limit	ycbcr420_2p;
> >> +	struct rot_limit	rgb888;
> >> +};
> >> +
> >> +/*
> >> + * A structure of rotator context.
> >> + * @ippdrv: prepare initialization using ippdrv.
> >> + * @regs_res: register resources.
> >> + * @regs: memory mapped io registers.
> >> + * @clock: rotator gate clock.
> >> + * @limit_tbl: limitation of rotator.
> >> + * @irq: irq number.
> >> + * @cur_buf_id: current operation buffer id.
> >> + * @suspended: suspended state.
> >> + */
> >> +struct rot_context {
> >> +	struct exynos_drm_ippdrv	ippdrv;
> >> +	struct resource	*regs_res;
> >> +	void __iomem	*regs;
> >> +	struct clk	*clock;
> >> +	struct rot_limit_table	*limit_tbl;
> >> +	int	irq;
> >> +	int	cur_buf_id[EXYNOS_DRM_OPS_MAX];
> >> +	bool	suspended;
> >> +};
> >> +
> >> +static void rotator_reg_set_irq(struct rot_context *rot, bool enable)
> >> +{
> >> +	u32 val = rot_read(ROT_CONFIG);
> >> +
> >> +	if (enable == true)
> >> +		val |= ROT_CONFIG_IRQ;
> >> +	else
> >> +		val &= ~ROT_CONFIG_IRQ;
> >> +
> >> +	rot_write(val, ROT_CONFIG);
> >> +}
> >> +
> >> +static u32 rotator_reg_get_format(struct rot_context *rot)
> >> +{
> >> +	u32 val = rot_read(ROT_CONTROL);
> >> +
> >> +	val &= ROT_CONTROL_FMT_MASK;
> >> +
> >> +	return val;
> >> +}
> >> +
> >> +static enum rot_irq_status rotator_reg_get_irq_status(struct
> rot_context
> >> *rot)
> >> +{
> >> +	u32 val = rot_read(ROT_STATUS);
> >> +
> >> +	val = ROT_STATUS_IRQ(val);
> >> +
> >> +	if (val == ROT_STATUS_IRQ_VAL_COMPLETE)
> >> +		return ROT_IRQ_STATUS_COMPLETE;
> >> +	else
> >
> > Remove else.
> 
> - done.
> 
> >
> >> +		return ROT_IRQ_STATUS_ILLEGAL;
> >> +}
> >> +
> >> +static irqreturn_t rotator_irq_handler(int irq, void *arg)
> >> +{
> >> +	struct rot_context *rot = arg;
> >> +	struct exynos_drm_ippdrv *ippdrv = &rot->ippdrv;
> >> +	struct drm_exynos_ipp_cmd_node *c_node = ippdrv->cmd;
> >> +	struct drm_exynos_ipp_event_work *event_work = c_node->event_work;
> >> +	enum rot_irq_status irq_status;
> >> +	u32 val;
> >> +
> >> +	/* Get execution result */
> >> +	irq_status = rotator_reg_get_irq_status(rot);
> >> +
> >> +	/* clear status */
> >> +	val = rot_read(ROT_STATUS);
> >> +	val |= ROT_STATUS_IRQ_PENDING((u32)irq_status);
> >> +	rot_write(val, ROT_STATUS);
> >> +
> >> +	if (irq_status == ROT_IRQ_STATUS_COMPLETE) {
> >> +		event_work->ippdrv = ippdrv;
> >> +		event_work->buf_id[EXYNOS_DRM_OPS_DST] =
> >> +			rot->cur_buf_id[EXYNOS_DRM_OPS_DST];
> >> +		queue_work(ippdrv->event_workq,
> >> +			(struct work_struct *)event_work);
> >> +	} else
> >> +		DRM_ERROR("the SFR is set illegally\n");
> >> +
> >> +	return IRQ_HANDLED;
> >> +}
> >> +
> >> +static void rotator_align_size(struct rot_context *rot, u32 fmt, u32
> >> *hsize,
> >> +		u32 *vsize)
> >> +{
> >> +	struct rot_limit_table *limit_tbl = rot->limit_tbl;
> >> +	struct rot_limit *limit;
> >> +	u32 mask, val;
> >> +
> >> +	/* Get size limit */
> >> +	if (fmt == ROT_CONTROL_FMT_RGB888)
> >> +		limit = &limit_tbl->rgb888;
> >> +	else
> >> +		limit = &limit_tbl->ycbcr420_2p;
> >> +
> >> +	/* Get mask for rounding to nearest aligned val */
> >> +	mask = ~((1 << limit->align) - 1);
> >> +
> >> +	/* Set aligned width */
> >> +	val = ROT_ALIGN(*hsize, limit->align, mask);
> >> +	if (val < limit->min_w)
> >> +		*hsize = ROT_MIN(limit->min_w, mask);
> >> +	else if (val > limit->max_w)
> >> +		*hsize = ROT_MAX(limit->max_w, mask);
> >> +	else
> >> +		*hsize = val;
> >> +
> >> +	/* Set aligned height */
> >> +	val = ROT_ALIGN(*vsize, limit->align, mask);
> >> +	if (val < limit->min_h)
> >> +		*vsize = ROT_MIN(limit->min_h, mask);
> >> +	else if (val > limit->max_h)
> >> +		*vsize = ROT_MAX(limit->max_h, mask);
> >> +	else
> >> +		*vsize = val;
> >> +}
> >> +
> >> +static int rotator_src_set_fmt(struct device *dev, u32 fmt)
> >> +{
> >> +	struct rot_context *rot = dev_get_drvdata(dev);
> >> +	u32 val;
> >> +
> >> +	val = rot_read(ROT_CONTROL);
> >> +	val &= ~ROT_CONTROL_FMT_MASK;
> >> +
> >> +	switch (fmt) {
> >> +	case DRM_FORMAT_NV12:
> >> +		val |= ROT_CONTROL_FMT_YCBCR420_2P;
> >> +		break;
> >> +	case DRM_FORMAT_XRGB8888:
> >> +		val |= ROT_CONTROL_FMT_RGB888;
> >> +		break;
> >> +	default:
> >> +		DRM_ERROR("invalid image format\n");
> >> +		return -EINVAL;
> >> +	}
> >> +
> >> +	rot_write(val, ROT_CONTROL);
> >> +
> >> +	return 0;
> >> +}
> >> +
> >> +static int rotator_src_set_size(struct device *dev, int swap,
> >> +		struct drm_exynos_pos *pos,
> >> +		struct drm_exynos_sz *sz)
> >> +{
> >> +	struct rot_context *rot = dev_get_drvdata(dev);
> >> +	u32 fmt, hsize, vsize;
> >> +	u32 val;
> >> +
> >> +	/* Get format */
> >> +	fmt = rotator_reg_get_format(rot);
> >> +
> >> +	/* Align buffer size */
> >> +	hsize = sz->hsize;
> >> +	vsize = sz->vsize;
> >> +	rotator_align_size(rot, fmt, &hsize, &vsize);
> >> +
> >> +	/* Set buffer size configuration */
> >> +	val = ROT_SET_BUF_SIZE_H(vsize) | ROT_SET_BUF_SIZE_W(hsize);
> >> +	rot_write(val, ROT_SRC_BUF_SIZE);
> >> +
> >> +	/* Set crop image position configuration */
> >> +	val = ROT_CROP_POS_Y(pos->y) | ROT_CROP_POS_X(pos->x);
> >> +	rot_write(val, ROT_SRC_CROP_POS);
> >> +	val = ROT_SRC_CROP_SIZE_H(pos->h) | ROT_SRC_CROP_SIZE_W(pos->w);
> >> +	rot_write(val, ROT_SRC_CROP_SIZE);
> >> +
> >> +	return 0;
> >> +}
> >> +
> >> +static int rotator_src_set_addr(struct device *dev,
> >> +		struct drm_exynos_ipp_buf_info *buf_info,
> >> +		u32 buf_id, enum drm_exynos_ipp_buf_type buf_type)
> >> +{
> >> +	struct rot_context *rot = dev_get_drvdata(dev);
> >> +	dma_addr_t addr[EXYNOS_DRM_PLANAR_MAX];
> >> +	u32 val, fmt, hsize, vsize;
> >> +	int i;
> >> +
> >> +	/* Set current buf_id */
> >> +	rot->cur_buf_id[EXYNOS_DRM_OPS_SRC] = buf_id;
> >> +
> >> +	switch (buf_type) {
> >> +	case IPP_BUF_ENQUEUE:
> >> +		/* Set address configuration */
> >> +		for_each_ipp_planar(i)
> >> +			addr[i] = buf_info->base[i];
> >
> > Check NULL.
> 
> - If not copy this state, we need to memset about addr.
>    no need check null.
> 
> >
> >> +
> >> +		/* Get format */
> >> +		fmt = rotator_reg_get_format(rot);
> >> +
> >> +		/* Re-set cb planar for NV12 format */
> >> +		if ((fmt == ROT_CONTROL_FMT_YCBCR420_2P) &&
> >> +					(addr[EXYNOS_DRM_PLANAR_CB] ==
> > 0x00)) {
> >
> > What is 0x00?
> 
> - It is NULL, I changed !addr instead of addr == 0x00
> 
> >
> >> +
> >> +			val = rot_read(ROT_SRC_BUF_SIZE);
> >> +			hsize = ROT_GET_BUF_SIZE_W(val);
> >> +			vsize = ROT_GET_BUF_SIZE_H(val);
> >> +
> >> +			/* Set cb planar */
> >> +			addr[EXYNOS_DRM_PLANAR_CB] =
> >> +				addr[EXYNOS_DRM_PLANAR_Y] + hsize * vsize;
> >> +		}
> >> +
> >> +		for_each_ipp_planar(i)
> >> +			rot_write(addr[i], ROT_SRC_BUF_ADDR(i));
> >> +		break;
> >> +	case IPP_BUF_DEQUEUE:
> >> +		for_each_ipp_planar(i)
> >> +			rot_write(0x0, ROT_SRC_BUF_ADDR(i));
> >> +		break;
> >> +	default:
> >> +		/* Nothing to do */
> >> +		break;
> >> +	}
> >> +
> >> +	return 0;
> >> +}
> >> +
> >> +static int rotator_dst_set_transf(struct device *dev,
> >> +		enum drm_exynos_degree degree,
> >> +		enum drm_exynos_flip flip)
> >> +{
> >> +	struct rot_context *rot = dev_get_drvdata(dev);
> >> +	u32 val;
> >> +
> >> +	/* Set transform configuration */
> >> +	val = rot_read(ROT_CONTROL);
> >> +	val &= ~ROT_CONTROL_FLIP_MASK;
> >> +
> >> +	switch (flip) {
> >> +	case EXYNOS_DRM_FLIP_VERTICAL:
> >> +		val |= ROT_CONTROL_FLIP_VERTICAL;
> >> +		break;
> >> +	case EXYNOS_DRM_FLIP_HORIZONTAL:
> >> +		val |= ROT_CONTROL_FLIP_HORIZONTAL;
> >> +		break;
> >> +	default:
> >> +		/* Flip None */
> >> +		break;
> >> +	}
> >> +
> >> +	val &= ~ROT_CONTROL_ROT_MASK;
> >> +
> >> +	switch (degree) {
> >> +	case EXYNOS_DRM_DEGREE_90:
> >> +		val |= ROT_CONTROL_ROT_90;
> >> +		break;
> >> +	case EXYNOS_DRM_DEGREE_180:
> >> +		val |= ROT_CONTROL_ROT_180;
> >> +		break;
> >> +	case EXYNOS_DRM_DEGREE_270:
> >> +		val |= ROT_CONTROL_ROT_270;
> >> +		break;
> >> +	default:
> >> +		/* Rotation 0 Degree */
> >> +		break;
> >> +	}
> >> +
> >> +	rot_write(val, ROT_CONTROL);
> >> +
> >> +	/* Check degree for setting buffer size swap */
> >> +	if ((degree == EXYNOS_DRM_DEGREE_90) ||
> >> +		(degree == EXYNOS_DRM_DEGREE_270))
> >> +		return 1;
> >
> > Correct return type. This function should return 0 or negative.
> 
> - no ~ this return type is boolean true or false.
>    but we need to error handling so, we use integer as you know
>    we reviewed this routine at our local git from our team(you and me).
> 
> >
> >> +	else
> >> +		return 0;
> >
> > Ditto.
> 
> - ditto.
> 
> >
> >> +}
> >> +
> >> +static int rotator_dst_set_size(struct device *dev, int swap,
> >> +		struct drm_exynos_pos *pos,
> >> +		struct drm_exynos_sz *sz)
> >> +{
> >> +	struct rot_context *rot = dev_get_drvdata(dev);
> >> +	u32 val, fmt, hsize, vsize;
> >> +
> >> +	/* Get format */
> >> +	fmt = rotator_reg_get_format(rot);
> >
> > Check if fmt is valid or not.
> 
> - added rotator_check_fmt()
> 
> >
> >> +
> >> +	/* Align buffer size */
> >> +	hsize = sz->hsize;
> >> +	vsize = sz->vsize;
> >> +	rotator_align_size(rot, fmt, &hsize, &vsize);
> >> +
> >> +	/* Set buffer size configuration */
> >> +	val = ROT_SET_BUF_SIZE_H(vsize) | ROT_SET_BUF_SIZE_W(hsize);
> >> +	rot_write(val, ROT_DST_BUF_SIZE);
> >> +
> >> +	/* Set crop image position configuration */
> >> +	val = ROT_CROP_POS_Y(pos->y) | ROT_CROP_POS_X(pos->x);
> >> +	rot_write(val, ROT_DST_CROP_POS);
> >> +
> >> +	return 0;
> >> +}
> >> +
> >> +static int rotator_dst_set_addr(struct device *dev,
> >> +		struct drm_exynos_ipp_buf_info *buf_info,
> >> +		u32 buf_id, enum drm_exynos_ipp_buf_type buf_type)
> >> +{
> >> +	struct rot_context *rot = dev_get_drvdata(dev);
> >> +	dma_addr_t addr[EXYNOS_DRM_PLANAR_MAX];
> >> +	u32 val, fmt, hsize, vsize;
> >> +	int i;
> >> +
> >> +	/* Set current buf_id */
> >> +	rot->cur_buf_id[EXYNOS_DRM_OPS_DST] = buf_id;
> >> +
> >> +	switch (buf_type) {
> >> +	case IPP_BUF_ENQUEUE:
> >> +		/* Set address configuration */
> >> +		for_each_ipp_planar(i)
> >> +			addr[i] = buf_info->base[i];
> >> +
> >> +		/* Get format */
> >> +		fmt = rotator_reg_get_format(rot);
> >
> > Check if fmt is valid or not.
> 
> - done.
> 
> >
> >> +
> >> +		/* Re-set cb planar for NV12 format */
> >> +		if ((fmt == ROT_CONTROL_FMT_YCBCR420_2P) &&
> >> +					(addr[EXYNOS_DRM_PLANAR_CB] ==
> > 0x00)) {
> >> +			/* Get buf size */
> >> +			val = rot_read(ROT_DST_BUF_SIZE);
> >> +
> >> +			hsize = ROT_GET_BUF_SIZE_W(val);
> >> +			vsize = ROT_GET_BUF_SIZE_H(val);
> >> +
> >> +			/* Set cb planar */
> >> +			addr[EXYNOS_DRM_PLANAR_CB] =
> >> +				addr[EXYNOS_DRM_PLANAR_Y] + hsize * vsize;
> >> +		}
> >> +
> >> +		for_each_ipp_planar(i)
> >> +			rot_write(addr[i], ROT_DST_BUF_ADDR(i));
> >> +		break;
> >> +	case IPP_BUF_DEQUEUE:
> >> +		for_each_ipp_planar(i)
> >> +			rot_write(0x0, ROT_DST_BUF_ADDR(i));
> >> +		break;
> >> +	default:
> >> +		/* Nothing to do */
> >> +		break;
> >> +	}
> >> +
> >> +	return 0;
> >> +}
> >> +
> >> +static struct exynos_drm_ipp_ops rot_src_ops = {
> >> +	.set_fmt	=	rotator_src_set_fmt,
> >> +	.set_size	=	rotator_src_set_size,
> >> +	.set_addr	=	rotator_src_set_addr,
> >> +};
> >> +
> >> +static struct exynos_drm_ipp_ops rot_dst_ops = {
> >> +	.set_transf	=	rotator_dst_set_transf,
> >> +	.set_size	=	rotator_dst_set_size,
> >> +	.set_addr	=	rotator_dst_set_addr,
> >> +};
> >> +
> >> +static int rotator_init_prop_list(struct exynos_drm_ippdrv *ippdrv)
> >> +{
> >> +	struct drm_exynos_ipp_prop_list *prop_list;
> >> +
> >> +	DRM_DEBUG_KMS("%s\n", __func__);
> >> +
> >> +	prop_list = kzalloc(sizeof(*prop_list), GFP_KERNEL);
> >> +	if (!prop_list) {
> >> +		DRM_ERROR("failed to alloc property list.\n");
> >> +		return -ENOMEM;
> >> +	}
> >> +
> >> +	/*ToDo fix support function list*/
> >> +
> >> +	prop_list->version = 1;
> >> +	prop_list->flip = (1 << EXYNOS_DRM_FLIP_VERTICAL) |
> >> +				(1 << EXYNOS_DRM_FLIP_HORIZONTAL);
> >> +	prop_list->degree = (1 << EXYNOS_DRM_DEGREE_0) |
> >> +				(1 << EXYNOS_DRM_DEGREE_90) |
> >> +				(1 << EXYNOS_DRM_DEGREE_180) |
> >> +				(1 << EXYNOS_DRM_DEGREE_270);
> >> +	prop_list->csc = 0;
> >> +	prop_list->crop = 0;
> >> +	prop_list->scale = 0;
> >> +
> >> +	ippdrv->prop_list = prop_list;
> >> +
> >> +	return 0;
> >> +}
> >> +
> >> +static int rotator_ippdrv_check_property(struct device *dev,
> >> +		struct drm_exynos_ipp_property *property)
> >> +{
> >> +	struct drm_exynos_ipp_config *src_config =
> >> +
> > &property->config[EXYNOS_DRM_OPS_SRC];
> >> +	struct drm_exynos_ipp_config *dst_config =
> >> +
> > &property->config[EXYNOS_DRM_OPS_DST];
> >> +	struct drm_exynos_pos *src_pos = &src_config->pos;
> >> +	struct drm_exynos_pos *dst_pos = &dst_config->pos;
> >> +	struct drm_exynos_sz *src_sz = &src_config->sz;
> >> +	struct drm_exynos_sz *dst_sz = &dst_config->sz;
> >> +	bool swap = false;
> >> +
> >> +	/* Check format configuration */
> >> +	if (src_config->fmt != dst_config->fmt) {
> >> +		DRM_DEBUG_KMS("%s:not support csc feature\n", __func__);
> >> +		return -EINVAL;
> >> +	}
> >> +
> >> +	switch (src_config->fmt) {
> >> +	case DRM_FORMAT_XRGB8888:
> >> +	case DRM_FORMAT_NV12:
> >> +		/* No problem */
> >> +		break;
> >> +	default:
> >> +		DRM_DEBUG_KMS("%s:not support format\n", __func__);
> >> +		return -EINVAL;
> >> +	}
> >
> > Use macro instead of switch-case. this just checks only format type.
> 
> - I don't thing so, If we make macro about this.
>    then we got some confusion about this macro at next change.
>    this case switch-case is better.
>    Do you prefer this ? please one more comment.
> 
> #define drm_check_fmt(fmt) if (fmt == DRM_FORMAT_XRGB8888 || fmt ==
> DRM_FORMAT_NV12) \
> 					return true;

#define drm_check_fmt(fmt)		((fmt & (DRM_FORMAT_XRGB8888 |
DRM_FORMAT_NV12)) ? true : false)

if (drm_check_fmt(src_config->fmt))
	Something;
else
	Something;

> 
> >
> >> +
> >> +	/* Check transform configuration */
> >> +	if (src_config->degree != EXYNOS_DRM_DEGREE_0) {
> >> +		DRM_DEBUG_KMS("%s:not support source-side rotation\n",
> >> +								__func__);
> >> +		return -EINVAL;
> >> +	}
> >> +
> >> +	switch (dst_config->degree) {
> >> +	case EXYNOS_DRM_DEGREE_90:
> >> +	case EXYNOS_DRM_DEGREE_270:
> >> +		swap = true;
> >> +	case EXYNOS_DRM_DEGREE_0:
> >> +	case EXYNOS_DRM_DEGREE_180:
> >> +		/* No problem */
> >> +		break;
> >> +	default:
> >> +		DRM_DEBUG_KMS("%s:invalid degree\n", __func__);
> >> +		return -EINVAL;
> >> +	}
> >> +
> >> +	if (src_config->flip != EXYNOS_DRM_FLIP_NONE) {
> >> +		DRM_DEBUG_KMS("%s:not support source-side flip\n",
> > __func__);
> >> +		return -EINVAL;
> >> +	}
> >> +
> >> +	switch (dst_config->flip) {
> >> +	case EXYNOS_DRM_FLIP_NONE:
> >> +	case EXYNOS_DRM_FLIP_VERTICAL:
> >> +	case EXYNOS_DRM_FLIP_HORIZONTAL:
> >> +		/* No problem */
> >> +		break;
> >> +	default:
> >> +		DRM_DEBUG_KMS("%s:invalid flip\n", __func__);
> >> +		return -EINVAL;
> >> +	}
> >
> > Use macro instead of switch-case. this just checks only flip type.
> 
> - ditto. please one more comment.
>   in my opinion: I prefer enumeration use switch-case.

What does each case do? Just check? If so, use macro as I mentioned. We
can't accept this codes.

> 
> >
> >> +
> >> +	/* Check size configuration */
> >> +	if ((src_pos->x + src_pos->w > src_sz->hsize) ||
> >> +		(src_pos->y + src_pos->h > src_sz->vsize)) {
> >> +		DRM_DEBUG_KMS("%s:out of source buffer bound\n", __func__);
> >> +		return -EINVAL;
> >> +	}
> >> +
> >> +	if (swap) {
> >> +		if ((dst_pos->x + dst_pos->h > dst_sz->vsize) ||
> >> +			(dst_pos->y + dst_pos->w > dst_sz->hsize)) {
> >> +			DRM_DEBUG_KMS("%s:out of destination buffer
> > bound\n",
> >> +								__func__);
> >> +			return -EINVAL;
> >> +		}
> >> +
> >> +		if ((src_pos->w != dst_pos->h) || (src_pos->h !=
> > dst_pos->w))
> >> {
> >> +			DRM_DEBUG_KMS("%s:not support scale feature\n",
> >> +								__func__);
> >> +			return -EINVAL;
> >> +		}
> >> +	} else {
> >> +		if ((dst_pos->x + dst_pos->w > dst_sz->hsize) ||
> >> +			(dst_pos->y + dst_pos->h > dst_sz->vsize)) {
> >> +			DRM_DEBUG_KMS("%s:out of destination buffer
> > bound\n",
> >> +								__func__);
> >> +			return -EINVAL;
> >> +		}
> >> +
> >> +		if ((src_pos->w != dst_pos->w) || (src_pos->h !=
> > dst_pos->h))
> >> {
> >> +			DRM_DEBUG_KMS("%s:not support scale feature\n",
> >> +								__func__);
> >> +			return -EINVAL;
> >> +		}
> >> +	}
> >> +
> >> +	return 0;
> >> +}
> >> +
> >> +static int rotator_ippdrv_start(struct device *dev, enum
> >> drm_exynos_ipp_cmd cmd)
> >> +{
> >> +	struct rot_context *rot = dev_get_drvdata(dev);
> >> +	u32 val;
> >> +
> >> +	if (rot->suspended) {
> >> +		DRM_ERROR("suspended state\n");
> >> +		return -EPERM;
> >> +	}
> >> +
> >> +	if (cmd != IPP_CMD_M2M) {
> >> +		DRM_ERROR("not support cmd: %d\n", cmd);
> >> +		return -EINVAL;
> >> +	}
> >> +
> >> +	/* Set interrupt enable */
> >> +	rotator_reg_set_irq(rot, true);
> >> +
> >> +	val = rot_read(ROT_CONTROL);
> >> +	val |= ROT_CONTROL_START;
> >> +
> >> +	rot_write(val, ROT_CONTROL);
> >> +
> >> +	return 0;
> >> +}
> >> +
> >> +static int __devinit rotator_probe(struct platform_device *pdev)
> >> +{
> >> +	struct device *dev = &pdev->dev;
> >> +	struct rot_context *rot;
> >> +	struct resource *res;
> >> +	struct exynos_drm_ippdrv *ippdrv;
> >> +	int ret;
> >> +
> >> +	rot = kzalloc(sizeof(*rot), GFP_KERNEL);
> >> +	if (!rot) {
> >> +		dev_err(dev, "failed to allocate rot\n");
> >> +		return -ENOMEM;
> >> +	}
> >> +
> >> +	rot->limit_tbl = (struct rot_limit_table *)
> >> +				platform_get_device_id(pdev)->driver_data;
> >> +
> >> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> >> +	if (!res) {
> >> +		dev_err(dev, "failed to find registers\n");
> >> +		ret = -ENOENT;
> >> +		goto err_get_resource;
> >> +	}
> >> +
> >> +	rot->regs_res = request_mem_region(res->start, resource_size(res),
> >> +
> > dev_name(dev));
> >> +	if (!rot->regs_res) {
> >> +		dev_err(dev, "failed to claim register region\n");
> >> +		ret = -ENOENT;
> >> +		goto err_get_resource;
> >> +	}
> >> +
> >> +	rot->regs = ioremap(res->start, resource_size(res));
> >> +	if (!rot->regs) {
> >> +		dev_err(dev, "failed to map register\n");
> >> +		ret = -ENXIO;
> >> +		goto err_ioremap;
> >> +	}
> >> +
> >> +	rot->irq = platform_get_irq(pdev, 0);
> >> +	if (rot->irq < 0) {
> >> +		dev_err(dev, "failed to get irq\n");
> >> +		ret = rot->irq;
> >> +		goto err_get_irq;
> >> +	}
> >> +
> >> +	ret = request_threaded_irq(rot->irq, NULL, rotator_irq_handler,
> >> +					IRQF_ONESHOT, "drm_rotator", rot);
> >> +	if (ret < 0) {
> >> +		dev_err(dev, "failed to request irq\n");
> >> +		goto err_get_irq;
> >> +	}
> >> +
> >> +	rot->clock = clk_get(dev, "rotator");
> >> +	if (IS_ERR_OR_NULL(rot->clock)) {
> >> +		dev_err(dev, "failed to get clock\n");
> >> +		ret = PTR_ERR(rot->clock);
> >> +		goto err_clk_get;
> >> +	}
> >> +
> >> +	pm_runtime_enable(dev);
> >> +
> >> +	ippdrv = &rot->ippdrv;
> >> +	ippdrv->dev = dev;
> >> +	ippdrv->ops[EXYNOS_DRM_OPS_SRC] = &rot_src_ops;
> >> +	ippdrv->ops[EXYNOS_DRM_OPS_DST] = &rot_dst_ops;
> >> +	ippdrv->check_property = rotator_ippdrv_check_property;
> >> +	ippdrv->start = rotator_ippdrv_start;
> >> +	ret = rotator_init_prop_list(ippdrv);
> >> +	if (ret < 0) {
> >> +		dev_err(dev, "failed to init property list.\n");
> >> +		goto err_ippdrv_register;
> >> +	}
> >> +
> >> +	DRM_DEBUG_KMS("%s:ippdrv[0x%x]\n", __func__, (int)ippdrv);
> >> +
> >> +	platform_set_drvdata(pdev, rot);
> >> +
> >> +	ret = exynos_drm_ippdrv_register(ippdrv);
> >> +	if (ret < 0) {
> >> +		dev_err(dev, "failed to register drm rotator device\n");
> >> +		kfree(ippdrv->prop_list);
> >> +		goto err_ippdrv_register;
> >> +	}
> >> +
> >> +	dev_info(dev, "The exynos rotator is probed successfully\n");
> >> +
> >> +	return 0;
> >> +
> >> +err_ippdrv_register:
> >> +	pm_runtime_disable(dev);
> >> +	clk_put(rot->clock);
> >> +err_clk_get:
> >> +	free_irq(rot->irq, rot);
> >> +err_get_irq:
> >> +	iounmap(rot->regs);
> >> +err_ioremap:
> >> +	release_resource(rot->regs_res);
> >> +	kfree(rot->regs_res);
> >> +err_get_resource:
> >> +	kfree(rot);
> >> +	return ret;
> >> +}
> >> +
> >> +static int __devexit rotator_remove(struct platform_device *pdev)
> >> +{
> >> +	struct device *dev = &pdev->dev;
> >> +	struct rot_context *rot = dev_get_drvdata(dev);
> >> +	struct exynos_drm_ippdrv *ippdrv = &rot->ippdrv;
> >> +
> >> +	kfree(ippdrv->prop_list);
> >> +	exynos_drm_ippdrv_unregister(ippdrv);
> >> +
> >> +	pm_runtime_disable(dev);
> >> +	clk_put(rot->clock);
> >> +
> >> +	free_irq(rot->irq, rot);
> >> +
> >> +	iounmap(rot->regs);
> >> +
> >> +	release_resource(rot->regs_res);
> >> +	kfree(rot->regs_res);
> >> +
> >> +	kfree(rot);
> >> +
> >> +	return 0;
> >> +}
> >> +
> >> +struct rot_limit_table rot_limit_tbl = {
> >> +	.ycbcr420_2p = {
> >> +		.min_w = 32,
> >> +		.min_h = 32,
> >> +		.max_w = SZ_32K,
> >> +		.max_h = SZ_32K,
> >> +		.align = 3,
> >> +	},
> >> +	.rgb888 = {
> >> +		.min_w = 8,
> >> +		.min_h = 8,
> >> +		.max_w = SZ_8K,
> >> +		.max_h = SZ_8K,
> >> +		.align = 2,
> >> +	},
> >> +};
> >> +
> >> +struct platform_device_id rotator_driver_ids[] = {
> >> +	{
> >> +		.name		= "exynos-rot",
> >> +		.driver_data	= (unsigned long)&rot_limit_tbl,
> >> +	},
> >> +	{},
> >> +};
> >> +
> >> +static int rotator_clk_crtl(struct rot_context *rot, bool enable)
> >> +{
> >> +	DRM_DEBUG_KMS("%s\n", __func__);
> >> +
> >> +	if (enable) {
> >> +		clk_enable(rot->clock);
> >> +		rot->suspended = false;
> >> +	} else {
> >> +		clk_disable(rot->clock);
> >> +		rot->suspended = true;
> >> +	}
> >> +
> >> +	return 0;
> >> +}
> >> +
> >> +
> >> +#ifdef CONFIG_PM_SLEEP
> >> +static int rotator_suspend(struct device *dev)
> >> +{
> >> +	struct rot_context *rot = dev_get_drvdata(dev);
> >> +
> >> +	/* ToDo */
> >> +
> >> +	DRM_DEBUG_KMS("%s\n", __func__);
> >> +
> >> +	if (pm_runtime_suspended(dev))
> >> +		return 0;
> >> +
> >> +	return rotator_clk_crtl(rot, false);
> >> +}
> >> +
> >> +static int rotator_resume(struct device *dev)
> >> +{
> >> +	struct rot_context *rot = dev_get_drvdata(dev);
> >> +
> >> +	/* ToDo */
> >> +
> >> +	DRM_DEBUG_KMS("%s\n", __func__);
> >> +
> >> +	if (!pm_runtime_suspended(dev))
> >> +		return rotator_clk_crtl(rot, true);
> >> +
> >> +	return 0;
> >> +}
> >> +#endif
> >> +
> >> +#ifdef CONFIG_PM_RUNTIME
> >> +static int rotator_runtime_suspend(struct device *dev)
> >> +{
> >> +	struct rot_context *rot = dev_get_drvdata(dev);
> >> +
> >> +	/* ToDo */
> >> +
> >> +	DRM_DEBUG_KMS("%s\n", __func__);
> >> +
> >> +	return  rotator_clk_crtl(rot, false);
> >> +}
> >> +
> >> +static int rotator_runtime_resume(struct device *dev)
> >> +{
> >> +	struct rot_context *rot = dev_get_drvdata(dev);
> >> +
> >> +	/* ToDo */
> >> +
> >> +	DRM_DEBUG_KMS("%s\n", __func__);
> >> +
> >> +	return  rotator_clk_crtl(rot, true);
> >> +}
> >> +#endif
> >> +
> >> +static const struct dev_pm_ops rotator_pm_ops = {
> >> +	SET_SYSTEM_SLEEP_PM_OPS(rotator_suspend, rotator_resume)
> >> +	SET_RUNTIME_PM_OPS(rotator_runtime_suspend, rotator_runtime_resume,
> >> +
> > NULL)
> >> +};
> >> +
> >> +struct platform_driver rotator_driver = {
> >> +	.probe		= rotator_probe,
> >> +	.remove		= __devexit_p(rotator_remove),
> >> +	.id_table	= rotator_driver_ids,
> >> +	.driver		= {
> >> +		.name	= "exynos-rot",
> >> +		.owner	= THIS_MODULE,
> >> +		.pm	= &rotator_pm_ops,
> >> +	},
> >> +};
> >> diff --git a/drivers/gpu/drm/exynos/exynos_drm_rotator.h
> >> b/drivers/gpu/drm/exynos/exynos_drm_rotator.h
> >> new file mode 100644
> >> index 0000000..fe929c9
> >> --- /dev/null
> >> +++ b/drivers/gpu/drm/exynos/exynos_drm_rotator.h
> >> @@ -0,0 +1,13 @@
> >> +/*
> >> + * Copyright (C) 2012 Samsung Electronics Co.Ltd
> >> + * Authors: YoungJun Cho <yj44.cho@xxxxxxxxxxx>
> >> + *
> >> + * This program is free software; you can redistribute it and/or
> modify
> >> + * it under the terms of the GNU General Public License version 2 as
> >> + * published by the Free Software Foundationr
> >> + */
> >> +
> >> +#ifndef	_EXYNOS_DRM_ROTATOR_H_
> >> +#define	_EXYNOS_DRM_ROTATOR_H_
> >> +
> >> +#endif
> >> diff --git a/drivers/gpu/drm/exynos/regs-rotator.h
> >> b/drivers/gpu/drm/exynos/regs-rotator.h
> >> new file mode 100644
> >> index 0000000..a09ac6e
> >> --- /dev/null
> >> +++ b/drivers/gpu/drm/exynos/regs-rotator.h
> >> @@ -0,0 +1,73 @@
> >> +/* drivers/gpu/drm/exynos/regs-rotator.h
> >> + *
> >> + * Copyright (c) 2012 Samsung Electronics Co., Ltd.
> >> + *		http://www.samsung.com/
> >> + *
> >> + * Register definition file for Samsung Rotator Interface (Rotator)
> >> driver
> >> + *
> >> + * This program is free software; you can redistribute it and/or
> modify
> >> + * it under the terms of the GNU General Public License version 2 as
> >> + * published by the Free Software Foundation.
> >> +*/
> >> +
> >> +#ifndef EXYNOS_REGS_ROTATOR_H
> >> +#define EXYNOS_REGS_ROTATOR_H
> >> +
> >> +/* Configuration */
> >> +#define ROT_CONFIG			0x00
> >> +#define ROT_CONFIG_IRQ			(3 << 8)
> >> +
> >> +/* Image Control */
> >> +#define ROT_CONTROL			0x10
> >> +#define ROT_CONTROL_PATTERN_WRITE	(1 << 16)
> >> +#define ROT_CONTROL_FMT_YCBCR420_2P	(1 << 8)
> >> +#define ROT_CONTROL_FMT_RGB888		(6 << 8)
> >> +#define ROT_CONTROL_FMT_MASK		(7 << 8)
> >> +#define ROT_CONTROL_FLIP_VERTICAL	(2 << 6)
> >> +#define ROT_CONTROL_FLIP_HORIZONTAL	(3 << 6)
> >> +#define ROT_CONTROL_FLIP_MASK		(3 << 6)
> >> +#define ROT_CONTROL_ROT_90		(1 << 4)
> >> +#define ROT_CONTROL_ROT_180		(2 << 4)
> >> +#define ROT_CONTROL_ROT_270		(3 << 4)
> >> +#define ROT_CONTROL_ROT_MASK		(3 << 4)
> >> +#define ROT_CONTROL_START		(1 << 0)
> >> +
> >> +/* Status */
> >> +#define ROT_STATUS			0x20
> >> +#define ROT_STATUS_IRQ_PENDING(x)	(1 << (x))
> >> +#define ROT_STATUS_IRQ(x)		(((x) >> 8) & 0x3)
> >> +#define ROT_STATUS_IRQ_VAL_COMPLETE	1
> >> +#define ROT_STATUS_IRQ_VAL_ILLEGAL	2
> >> +
> >> +/* Buffer Address */
> >> +#define ROT_SRC_BUF_ADDR(n)		(0x30 + ((n) << 2))
> >> +#define ROT_DST_BUF_ADDR(n)		(0x50 + ((n) << 2))
> >> +
> >> +/* Buffer Size */
> >> +#define ROT_SRC_BUF_SIZE		0x3c
> >> +#define ROT_DST_BUF_SIZE		0x5c
> >> +#define ROT_SET_BUF_SIZE_H(x)		((x) << 16)
> >> +#define ROT_SET_BUF_SIZE_W(x)		((x) << 0)
> >> +#define ROT_GET_BUF_SIZE_H(x)		((x) >> 16)
> >> +#define ROT_GET_BUF_SIZE_W(x)		((x) & 0xffff)
> >> +
> >> +/* Crop Position */
> >> +#define ROT_SRC_CROP_POS		0x40
> >> +#define ROT_DST_CROP_POS		0x60
> >> +#define ROT_CROP_POS_Y(x)		((x) << 16)
> >> +#define ROT_CROP_POS_X(x)		((x) << 0)
> >> +
> >> +/* Source Crop Size */
> >> +#define ROT_SRC_CROP_SIZE		0x44
> >> +#define ROT_SRC_CROP_SIZE_H(x)		((x) << 16)
> >> +#define ROT_SRC_CROP_SIZE_W(x)		((x) << 0)
> >> +
> >> +/* Round to nearest aligned value */
> >> +#define ROT_ALIGN(x, align, mask)	(((x) + (1 << ((align) - 1))) &
> >> (mask))
> >> +/* Minimum limit value */
> >> +#define ROT_MIN(min, mask)		(((min) + ~(mask)) & (mask))
> >> +/* Maximum limit value */
> >> +#define ROT_MAX(max, mask)		((max) & (mask))
> >> +
> >> +#endif /* EXYNOS_REGS_ROTATOR_H */
> >> +
> >> --
> >> 1.7.0.4
> >
> >

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel


[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux