When possible use dev_err_probe help to properly deal with the PROBE_DEFER error, the benefit is that DEFER issue will be logged in the devices_deferred debugfs file. And using dev_err_probe() can reduce code size, and the error value gets printed. Signed-off-by: Cai Huoqing <caihuoqing@xxxxxxxxx> --- drivers/gpu/drm/panel/panel-innolux-ej030na.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/panel/panel-innolux-ej030na.c b/drivers/gpu/drm/panel/panel-innolux-ej030na.c index 34b98f70bd22..c558de3f99be 100644 --- a/drivers/gpu/drm/panel/panel-innolux-ej030na.c +++ b/drivers/gpu/drm/panel/panel-innolux-ej030na.c @@ -198,16 +198,14 @@ static int ej030na_probe(struct spi_device *spi) return -EINVAL; priv->supply = devm_regulator_get(dev, "power"); - if (IS_ERR(priv->supply)) { - dev_err(dev, "Failed to get power supply\n"); - return PTR_ERR(priv->supply); - } + if (IS_ERR(priv->supply)) + return dev_err_probe(dev, PTR_ERR(priv->supply), + "Failed to get power supply\n"); priv->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); - if (IS_ERR(priv->reset_gpio)) { - dev_err(dev, "Failed to get reset GPIO\n"); - return PTR_ERR(priv->reset_gpio); - } + if (IS_ERR(priv->reset_gpio)) + return dev_err_probe(dev, PTR_ERR(priv->reset_gpio), + "Failed to get reset GPIO\n"); drm_panel_init(&priv->panel, dev, &ej030na_funcs, DRM_MODE_CONNECTOR_DPI); -- 2.25.1