For DSC to work we typically need a 2,2,1 configuration. This should
suffice for resolutions upto 4k. For more resolutions like 8k this won't
work.
The topology information is provided by DTS so we try to deduce the
topology required for DSC.
Furthermore, we can use 1 DSC encoder in lesser resolutions, but that is
not power efficient according to Abhinav, it is better to use 2 mixers
as that will split width/2 and is proven to be power efficient.
Also, the panel has been tested only with 2,2,1 configuration, so for
now we blindly create 2,2,1 topology when DSC is enabled
Co-developed-by: Abhinav Kumar <abhinavk@xxxxxxxxxxxxxx>
Signed-off-by: Abhinav Kumar <abhinavk@xxxxxxxxxxxxxx>
Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx>
---
Changes since RFC:
- Add more details in changelog
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
index 41140b781e66..8f0a8bd9c8ff 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
@@ -573,6 +573,8 @@ static struct msm_display_topology dpu_encoder_get_topology(
struct drm_display_mode *mode)
{
struct msm_display_topology topology = {0};
+ struct drm_encoder *drm_enc;
+ struct msm_drm_private *priv;
int i, intf_count = 0;
for (i = 0; i < MAX_PHYS_ENCODERS_PER_VIRTUAL; i++)
@@ -607,8 +609,22 @@ static struct msm_display_topology dpu_encoder_get_topology(
topology.num_enc = 0;
topology.num_intf = intf_count;
+ drm_enc = &dpu_enc->base;
+ priv = drm_enc->dev->dev_private;
+ if (priv && priv->dsc) {
+ /* In case of Display Stream Compression DSC, we would use
+ * 2 encoders, 2 line mixers and 1 interface
+ * this is power optimal and can drive upto (including) 4k
+ * screens
+ */
+ topology.num_enc = 2;
+ topology.num_intf = 1;
+ topology.num_lm = 2;
+ }
+
return topology;
}
+
static int dpu_encoder_virt_atomic_check(
struct drm_encoder *drm_enc,
struct drm_crtc_state *crtc_state,
--
2.31.1
