[RFC PATCH 08/17] dt-bindings: display: bridge: Add Samsung MIPI DSIM bridge

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Samsing MIPI DSIM bridge can be found on Exynos and NXP's
i.MX8M Mini and Nano SoC's.

This dt-bindings replaces legacy exynos_dsim.txt.

Used the example node from latest Exynos SoC instead of
the one used in legacy exynos_dsim.txt.

Add dt-bingings for it.

Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Signed-off-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx>
---
 .../display/bridge/samsung,mipi-dsim.yaml     | 278 ++++++++++++++++++
 .../bindings/display/exynos/exynos_dsim.txt   |  90 ------
 MAINTAINERS                                   |   1 +
 3 files changed, 279 insertions(+), 90 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml
 delete mode 100644 Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt

diff --git a/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml b/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml
new file mode 100644
index 000000000000..b2970734ffd7
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml
@@ -0,0 +1,278 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/samsung,mipi-dsim.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung MIPI DSIM bridge controller
+
+maintainers:
+  - Inki Dae <inki.dae@xxxxxxxxxxx>
+  - Joonyoung Shim <jy0922.shim@xxxxxxxxxxx>
+  - Seung-Woo Kim <sw0312.kim@xxxxxxxxxxx>
+  - Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
+  - Andrzej Hajda <a.hajda@xxxxxxxxxxx>
+  - Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx>
+
+description: |
+  Samsung MIPI DSIM bridge controller can be found it on Exynos
+  and i.MX8M Mini and Nano SoC's.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos3250-mipi-dsi
+      - samsung,exynos4210-mipi-dsi
+      - samsung,exynos5410-mipi-dsi
+      - samsung,exynos5422-mipi-dsi
+      - samsung,exynos5433-mipi-dsi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  clocks:
+    minItems: 2
+    maxItems: 5
+
+  clock-names:
+    minItems: 2
+    maxItems: 5
+
+  phys:
+    maxItems: 1
+    description: phandle to the phy module representing the DPHY
+
+  phy-names:
+    items:
+      - const: dsim
+
+  samsung,phy-type:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: phandle to the samsung phy-type
+
+  power-domains:
+    description: phandle to the associated power domain
+    maxItems: 1
+
+  samsung,power-domain:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to the associated samsung power domain
+    maxItems: 1
+
+  vddcore-supply:
+    description: MIPI DSIM Core voltage supply (e.g. 1.1V)
+
+  vddio-supply:
+    description: MIPI DSIM I/O and PLL voltage supply (e.g. 1.8V)
+
+  samsung,burst-clock-frequency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      DSIM high speed burst mode frequency.
+
+  samsung,esc-clock-frequency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      DSIM escape mode frequency.
+
+  samsung,pll-clock-frequency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      DSIM oscillator clock frequency.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        description:
+          Input port node to receive pixel data from the
+          display controller. Exactly one endpoint must be
+          specified.
+        properties:
+          endpoint@0:
+            $ref: /schemas/graph.yaml#/properties/endpoint
+            description: sub-node describing the input from MIC
+
+        unevaluatedProperties: false
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          DSI output port node to the panel or the next bridge
+          in the chain
+
+required:
+  - '#address-cells'
+  - '#size-cells'
+  - clock-names
+  - clocks
+  - compatible
+  - interrupts
+  - phy-names
+  - phys
+  - reg
+  - samsung,burst-clock-frequency
+  - samsung,esc-clock-frequency
+  - samsung,pll-clock-frequency
+
+allOf:
+  - $ref: ../dsi-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-mipi-dsi
+
+    then:
+      properties:
+        clocks:
+          minItems: 5
+
+        clock-names:
+          items:
+            - const: bus_clk
+            - const: phyclk_mipidphy0_bitclkdiv8
+            - const: phyclk_mipidphy0_rxclkesc0
+            - const: sclk_rgb_vclk_to_dsim0
+            - const: sclk_mipi
+
+        ports:
+          required:
+            - port@0
+
+      required:
+        - ports
+        - vddcore-supply
+        - vddio-supply
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5410-mipi-dsi
+
+    then:
+      properties:
+        clocks:
+          minItems: 2
+
+        clock-names:
+          items:
+            - const: bus_clk
+            - const: pll_clk
+
+      required:
+        - vddcore-supply
+        - vddio-supply
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos4210-mipi-dsi
+
+    then:
+      properties:
+        clocks:
+          minItems: 2
+
+        clock-names:
+          items:
+            - const: bus_clk
+            - const: sclk_mipi
+
+      required:
+        - vddcore-supply
+        - vddio-supply
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos3250-mipi-dsi
+
+    then:
+      properties:
+        clocks:
+          minItems: 2
+
+        clock-names:
+          items:
+            - const: bus_clk
+            - const: pll_clk
+
+      required:
+        - vddcore-supply
+        - vddio-supply
+        - samsung,phy-type
+
+additionalProperties:
+  type: object
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5433.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    dsi@13900000 {
+       compatible = "samsung,exynos5433-mipi-dsi";
+       reg = <0x13900000 0xC0>;
+       interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+       phys = <&mipi_phy 1>;
+       phy-names = "dsim";
+       clocks = <&cmu_disp CLK_PCLK_DSIM0>,
+                <&cmu_disp CLK_PHYCLK_MIPIDPHY0_BITCLKDIV8>,
+                <&cmu_disp CLK_PHYCLK_MIPIDPHY0_RXCLKESC0>,
+                <&cmu_disp CLK_SCLK_RGB_VCLK_TO_DSIM0>,
+                <&cmu_disp CLK_SCLK_DSIM0>;
+       clock-names = "bus_clk",
+                     "phyclk_mipidphy0_bitclkdiv8",
+                     "phyclk_mipidphy0_rxclkesc0",
+                     "sclk_rgb_vclk_to_dsim0",
+                     "sclk_mipi";
+       power-domains = <&pd_disp>;
+       vddcore-supply = <&ldo6_reg>;
+       vddio-supply = <&ldo7_reg>;
+       samsung,burst-clock-frequency = <512000000>;
+       samsung,esc-clock-frequency = <16000000>;
+       samsung,pll-clock-frequency = <24000000>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&te_irq>;
+       status = "disabled";
+       #address-cells = <1>;
+       #size-cells = <0>;
+
+       panel@0 {
+          compatible = "samsung,s6e3ha2";
+          reg = <0>;
+          vdd3-supply = <&ldo27_reg>;
+          vci-supply = <&ldo28_reg>;
+          reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>;
+          enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>;
+       };
+
+       ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+             reg = <0>;
+
+             dsi_to_mic: endpoint {
+                remote-endpoint = <&mic_to_dsi>;
+             };
+          };
+       };
+    };
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt b/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt
deleted file mode 100644
index be377786e8cd..000000000000
--- a/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt
+++ /dev/null
@@ -1,90 +0,0 @@
-Exynos MIPI DSI Master
-
-Required properties:
-  - compatible: value should be one of the following
-		"samsung,exynos3250-mipi-dsi" /* for Exynos3250/3472 SoCs */
-		"samsung,exynos4210-mipi-dsi" /* for Exynos4 SoCs */
-		"samsung,exynos5410-mipi-dsi" /* for Exynos5410/5420/5440 SoCs */
-		"samsung,exynos5422-mipi-dsi" /* for Exynos5422/5800 SoCs */
-		"samsung,exynos5433-mipi-dsi" /* for Exynos5433 SoCs */
-  - reg: physical base address and length of the registers set for the device
-  - interrupts: should contain DSI interrupt
-  - clocks: list of clock specifiers, must contain an entry for each required
-    entry in clock-names
-  - clock-names: should include "bus_clk"and "sclk_mipi" entries
-		 the use of "pll_clk" is deprecated
-  - phys: list of phy specifiers, must contain an entry for each required
-    entry in phy-names
-  - phy-names: should include "dsim" entry
-  - vddcore-supply: MIPI DSIM Core voltage supply (e.g. 1.1V)
-  - vddio-supply: MIPI DSIM I/O and PLL voltage supply (e.g. 1.8V)
-  - samsung,pll-clock-frequency: specifies frequency of the oscillator clock
-  - #address-cells, #size-cells: should be set respectively to <1> and <0>
-    according to DSI host bindings (see MIPI DSI bindings [1])
-  - samsung,burst-clock-frequency: specifies DSI frequency in high-speed burst
-    mode
-  - samsung,esc-clock-frequency: specifies DSI frequency in escape mode
-
-Optional properties:
-  - power-domains: a phandle to DSIM power domain node
-
-Child nodes:
-  Should contain DSI peripheral nodes (see MIPI DSI bindings [1]).
-
-Video interfaces:
-  Device node can contain following video interface port nodes according to [2]:
-  0: RGB input,
-  1: DSI output
-
-[1]: Documentation/devicetree/bindings/display/mipi-dsi-bus.txt
-[2]: Documentation/devicetree/bindings/media/video-interfaces.txt
-
-Example:
-
-	dsi@11c80000 {
-		compatible = "samsung,exynos4210-mipi-dsi";
-		reg = <0x11C80000 0x10000>;
-		interrupts = <0 79 0>;
-		clocks = <&clock 286>, <&clock 143>;
-		clock-names = "bus_clk", "sclk_mipi";
-		phys = <&mipi_phy 1>;
-		phy-names = "dsim";
-		vddcore-supply = <&vusb_reg>;
-		vddio-supply = <&vmipi_reg>;
-		power-domains = <&pd_lcd0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		samsung,pll-clock-frequency = <24000000>;
-
-		panel@1 {
-			reg = <0>;
-			...
-			port {
-				panel_ep: endpoint {
-					remote-endpoint = <&dsi_ep>;
-				};
-			};
-		};
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				decon_to_mic: endpoint {
-					remote-endpoint = <&mic_to_decon>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-				dsi_ep: endpoint {
-					reg = <0>;
-					samsung,burst-clock-frequency = <500000000>;
-					samsung,esc-clock-frequency = <20000000>;
-					remote-endpoint = <&panel_ep>;
-				};
-			};
-		};
-	};
diff --git a/MAINTAINERS b/MAINTAINERS
index 733c2ebc0393..e571fc7792aa 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5873,6 +5873,7 @@ M:	Andrzej Hajda <a.hajda@xxxxxxxxxxx>
 M:	Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx>
 S:	Maintained
 T:	git git://anongit.freedesktop.org/drm/drm-misc
+F:	Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml
 F:	drivers/gpu/drm/bridge/samsung-dsim.c
 
 DRM DRIVER FOR SITRONIX ST7703 PANELS
-- 
2.25.1




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux