Hi Laurent, On Mon, Jun 21, 2021 at 6:26 PM Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> wrote: > > Hi Dave, > > On Mon, Jun 21, 2021 at 12:49:14PM +0100, Dave Stevenson wrote: > > On Sun, 20 Jun 2021 at 23:49, Laurent Pinchart wrote: > > > On Sun, Jun 20, 2021 at 09:42:27PM +0300, Laurent Pinchart wrote: > > > > On Sun, Jun 20, 2021 at 03:29:03PM +0100, Dave Stevenson wrote: > > > > > On Sun, 20 Jun 2021 at 04:26, Laurent Pinchart wrote: > > > > > > > > > > > > Hi Maxime, > > > > > > > > > > > > I'm testing this, and I'm afraid it causes an issue with all the > > > > > > I2C-controlled bridges. I'm focussing on the newly merged ti-sn65dsi83 > > > > > > driver at the moment, but other are affected the same way. > > > > > > > > > > > > With this patch, the DSI component is only added when the DSI device is > > > > > > attached to the host with mipi_dsi_attach(). In the ti-sn65dsi83 driver, > > > > > > this happens in the bridge attach callback, which is called when the > > > > > > bridge is attached by a call to drm_bridge_attach() in vc4_dsi_bind(). > > > > > > This creates a circular dependency, and the DRM/KMS device is never > > > > > > created. > > > > > > > > > > > > How should this be solved ? Dave, I think you have shown an interest in > > > > > > the sn65dsi83 recently, any help would be appreciated. On a side note, > > > > > > I've tested the ti-sn65dsi83 driver on a v5.10 RPi kernel, without much > > > > > > success (on top of commit e1499baa0b0c I get a very weird frame rate - > > > > > > 147 fps of 99 fps instead of 60 fps - and nothing on the screen, and on > > > > > > top of the latest v5.10 RPi branch, I get lock-related warnings at every > > > > > > page flip), which is why I tried v5.12 and noticed this patch. Is it > > > > > > worth trying to bring up the display on the v5.10 RPi kernel in parallel > > > > > > to fixing the issue introduced in this patch, or is DSI known to be > > > > > > broken there ? > > > > > > > > > > I've been looking at SN65DSI83/4, but as I don't have any hardware > > > > > I've largely been suggesting things to try to those on the forums who > > > > > do [1]. > > > > > > > > > > My branch at https://github.com/6by9/linux/tree/rpi-5.10.y-sn65dsi8x-marek > > > > > is the latest one I've worked on. It's rpi-5.10.y with Marek's driver > > > > > cherry-picked, and an overlay and simple-panel definition by others. > > > > > It also has a rework for vc4_dsi to use pm_runtime, instead of > > > > > breaking up the DSI bridge chain (which is flawed as it never calls > > > > > the bridge mode_set or mode_valid functions which sn65dsi83 relies > > > > > on). > > > > > > > > > > I ran it on Friday in the lab and encountered an issue with vc4_dsi > > > > > should vc4_dsi_encoder_mode_fixup wish for a divider of 7 (required > > > > > for this 800x1280 panel over 4 lanes) where it resulted in an invalid > > > > > mode configuration. That resulted in patch [2] which then gave me > > > > > sensible numbers. > > > > > > > > > > That branch with dtoverlay=vc4-kms-v3d and > > > > > dtoverlay=vc4-kms-dsi-ti-sn65dsi83 created all the expected devices, > > > > > and everything came up normally. > > > > > It was a busy day, but I think I even stuck a scope on the clock lanes > > > > > at that point and confirmed that they were at the link frequency > > > > > expected. > > > > > > > > Thanks, I'll test your branch and will report the results. > > > > > > I had to apply the following diff to work around a crash: > > > > > > diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi83.c b/drivers/gpu/drm/bridge/ti-sn65dsi83.c > > > index 55b6c53207f5..647426aa793a 100644 > > > --- a/drivers/gpu/drm/bridge/ti-sn65dsi83.c > > > +++ b/drivers/gpu/drm/bridge/ti-sn65dsi83.c > > > @@ -525,6 +525,9 @@ static bool sn65dsi83_mode_fixup(struct drm_bridge *bridge, > > > > > > /* The DSI format is always RGB888_1X24 */ > > > list_for_each_entry(connector, &ddev->mode_config.connector_list, head) { > > > + if (!connector->display_info.bus_formats) > > > + continue; > > > + > > > switch (connector->display_info.bus_formats[0]) { > > > case MEDIA_BUS_FMT_RGB666_1X7X3_SPWG: > > > ctx->lvds_format_24bpp = false; > > > > > > connector->display_info.bus_formats is NULL for the HDMI connectors, as > > > I have nothing connected to them, as well as for the writeback > > > connector. > > > > I'm now confused as to what I'm doing as my branch appears NOT to have > > Marek's latest version of the driver as it doesn't have > > sn65dsi83_mode_fixup. > > I need to have another look at what's going on - I think I've got > > branches confused when switching between machines :-( Remaking that > > branch now. > > > > I do see that Marek has sent another patch around > > sn65dsi83_mode_fixup, but it'll still dereference > > connector->display_info.bus_formats[0] on all connectors. Shouldn't it > > only be switching on the one connector that is connected to this > > bridge, not HDMI or writeback connectors? I'm not totally clear on > > which connectors are in that list. > > https://patchwork.freedesktop.org/patch/440175/ > > The following series should fix the issue: > > [PATCH] drm/bridge: ti-sn65dsi83: Replace connector format patching with atomic_get_input_bus_fmts > [PATCH 0/5] ti-sn65dsi83: Finalize transition to atomic operations Look like DSI on STM32MP1 seems broken even with these on top of drm-misc/drm-misc-next , anything broken on the tree? Thanks, Jagan.
