Sent from ProtonMail mobile
-------- Original Message --------
On May 10, 2021, 10:49, < dri-devel-request@xxxxxxxxxxxxxxxxxxxxx> wrote:
Send dri-devel mailing list submissions to
dri-devel@xxxxxxxxxxxxxxxxxxxxxTo subscribe or unsubscribe via the World Wide Web, visit
https://lists.freedesktop.org/mailman/listinfo/dri-devel
or, via email, send a message with subject or body 'help' to
dri-devel-request@xxxxxxxxxxxxxxxxxxxxxYou can reach the person managing the list at
dri-devel-owner@xxxxxxxxxxxxxxxxxxxxxWhen replying, please edit your Subject line so it is more specific
than "Re: Contents of dri-devel digest..."Today's Topics:
1. Re: [v3, 4/5] drm/connector: Add a helper to attach the
colorspace property (Jernej ?krabec)
2. Re: [PATCH v2] drm/amdgpu: Ensure that the modifier requested
is supported by plane. (youling257)
3. Re: [PATCH V4 2/2] drm/bridge: ti-sn65dsi83: Add TI SN65DSI83
and SN65DSI84 driver (Frieder Schrempf)----------------------------------------------------------------------
Message: 1
Date: Fri, 07 May 2021 16:57:04 +0200
From: Jernej ?krabec <jernej.skrabec@xxxxxxxxx>
To: dri-devel@xxxxxxxxxxxxxxxxxxxxx, Daniel Vetter
<daniel.vetter@xxxxxxxxx>, David Airlie <airlied@xxxxxxxx>, Maarten
Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>, Thomas Zimmermann
<tzimmermann@xxxxxxx>, Maxime Ripard <maxime@xxxxxxxxxx>, Maxime
Ripard <maxime@xxxxxxxxxx>
Cc: Tim Gover <tim.gover@xxxxxxxxxxxxxxx>, Neil Armstrong
<narmstrong@xxxxxxxxxxxx>, Andrzej Hajda <a.hajda@xxxxxxxxxxx>,
Laurent Pinchart <Laurent.pinchart@xxxxxxxxxxxxxxxx>, Phil Elwell
<phil@xxxxxxxxxxxxxxx>, Dave Stevenson
<dave.stevenson@xxxxxxxxxxxxxxx>, amd-gfx@xxxxxxxxxxxxxxxxxxxxx, Jonas
Karlman <jonas@xxxxxxxxx>, Leo Li <sunpeng.li@amd.com>,
intel-gfx@xxxxxxxxxxxxxxxxxxxxx, Rodrigo Vivi
<rodrigo.vivi@xxxxxxxxx>, Jernej Skrabec <jernej.skrabec@xxxxxxxx>,
Dom Cobley <dom@xxxxxxxxxxxxxxx>, linux-kernel@xxxxxxxxxxxxxxx, Robert
Foss <robert.foss@xxxxxxxxxx>, Alex Deucher
<alexander.deucher@xxxxxxx>, Christian K?nig
<christian.koenig@xxxxxxx>
Subject: Re: [v3, 4/5] drm/connector: Add a helper to attach the
colorspace property
Message-ID: <2190160.Z2YBaczauS@jernej-laptop>
Content-Type: text/plain; charset="us-ascii"Hi!
Dne petek, 30. april 2021 ob 11:44:50 CEST je Maxime Ripard napisal(a):
> The intel driver uses the same logic to attach the Colorspace property
> in multiple places and we'll need it in vc4 too. Let's move that common
> code in a helper.
>
> Signed-off-by: Maxime Ripard <maxime@xxxxxxxxxx>
> ---
>
> Changes from v2:
> - Rebased on current drm-misc-next
>
> Changes from v1:
> - New patch
> ---Reviewed-by: Jernej Skrabec <jernej.skrabec@xxxxxxxxx>
Best regards,
Jernej------------------------------
Message: 2
Date: Sun, 9 May 2021 20:17:41 +0800
From: youling257 <youling257@xxxxxxxxx>
To: markyacoub@xxxxxxxxxxxx
Cc: amd-gfx@xxxxxxxxxxxxxxxxxxxxx, dri-devel@xxxxxxxxxxxxxxxxxxxxx,
michel@xxxxxxxxxxx, daniel@xxxxxxxxxxxxx, bas@xxxxxxxxxxxxxxxxxxx,
alexander.deucher@xxxxxxx, markyacoub@xxxxxxxxxx
Subject: Re: [PATCH v2] drm/amdgpu: Ensure that the modifier requested
is supported by plane.
Message-ID: <20210509121741.25858-1-youling257@xxxxxxxxx>I using amd 3400g running with android-x86, this patch is a bad commit when i use android-x86 on amdgpu.
------------------------------
Message: 3
Date: Mon, 10 May 2021 10:48:52 +0200
From: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>
To: Marek Vasut <marex@xxxxxxx>, dri-devel@xxxxxxxxxxxxxxxxxxxxx
Cc: ch@xxxxxxx, Linus Walleij <linus.walleij@xxxxxxxxxx>, Douglas
Anderson <dianders@xxxxxxxxxxxx>, Jagan Teki
<jagan@xxxxxxxxxxxxxxxxxxxx>, Laurent Pinchart
<laurent.pinchart@xxxxxxxxxxxxxxxx>, Loic Poulain
<loic.poulain@xxxxxxxxxx>, Philippe Schenker
<philippe.schenker@xxxxxxxxxxx>, Sam Ravnborg <sam@xxxxxxxxxxxx>,
Stephen Boyd <swboyd@xxxxxxxxxxxx>, Valentin Raevsky
<valentin@xxxxxxxxxxxxxx>
Subject: Re: [PATCH V4 2/2] drm/bridge: ti-sn65dsi83: Add TI SN65DSI83
and SN65DSI84 driver
Message-ID: <645eb495-e30e-ed70-f01a-9f3f382f2a20@xxxxxxxxxx>
Content-Type: text/plain; charset=utf-8On 08.05.21 22:22, Marek Vasut wrote:
> Add driver for TI SN65DSI83 Single-link DSI to Single-link LVDS bridge
> and TI SN65DSI84 Single-link DSI to Dual-link or 2x Single-link LVDS
> bridge. TI SN65DSI85 is unsupported due to lack of hardware to test on,
> but easy to add.
>
> The driver operates the chip via I2C bus. Currently the LVDS clock are
> always derived from DSI clock lane, which is the usual mode of operation.
> Support for clock from external oscillator is not implemented, but it is
> easy to add if ever needed. Only RGB888 pixel format is implemented, the
> LVDS666 is not supported, but could be added if needed.
>
> Reviewed-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
> Reviewed-by: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>
> Tested-by: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>
> Signed-off-by: Marek Vasut <marex@xxxxxxx>
> Cc: Douglas Anderson <dianders@xxxxxxxxxxxx>
> Cc: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx>
> Cc: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> Cc: Linus Walleij <linus.walleij@xxxxxxxxxx>
> Cc: Loic Poulain <loic.poulain@xxxxxxxxxx>
> Cc: Philippe Schenker <philippe.schenker@xxxxxxxxxxx>
> Cc: Sam Ravnborg <sam@xxxxxxxxxxxx>
> Cc: Stephen Boyd <swboyd@xxxxxxxxxxxx>
> Cc: Valentin Raevsky <valentin@xxxxxxxxxxxxxx>
> To: dri-devel@xxxxxxxxxxxxxxxxxxxxx
> ---
> V2: - Use dev_err_probe()
> - Set REG_RC_RESET as volatile
> - Wait for PLL stabilization by polling REG_RC_LVDS_PLL
> - Use ctx->mode = *adj instead of *mode in sn65dsi83_mode_set
> - Add tested DSI84 support in dual-link mode
> - Correctly set VCOM
> - Fill in missing DSI CHB and LVDS CHB bits from DSI84 and DSI85
> datasheets, with that all the reserved bits make far more sense
> as the DSI83 and DSI84 seems to be reduced version of DSI85
> V3: - Handle the dual-link LVDS with two port panel or bridge
> V4: - Add RB from Linus Walleij
> - Rename REG_DSI_LANE_LVDS_LINK_CFG_DUAL to
> REG_DSI_LANE_DSI_CHANNEL_MODE_SINGLE and fill in the remaining
> DSI link options from DSI85 datasheet. DSI85 can do dual and 2x
> single DSI mode, but DSI85 is currently unsupported by the
> driver. Add a comment about DSI85, so that all the places which
> need to be adjusted for DSI85 are marked accordingly.
> - Add REG_DSI_LANE_LEFT_RIGHT_PIXELS bit for DSI
> - Add handling for JEIDA18/JEIDA24/SPWG24 LVDS formats. Use SPWG24
> as fallback on output bridges until they are all fixed.
> - Patch DSI bus format to fixed RGB888_1X24 instead of passing
> through the LVDS bus format.I just want to report that v4 now handles my panel with MEDIA_BUS_FMT_RGB888_1X7X4_SPWG correctly. Thanks for coming up with this solution. Looks good to me.
> ---
> drivers/gpu/drm/bridge/Kconfig | 10 +
> drivers/gpu/drm/bridge/Makefile | 1 +
> drivers/gpu/drm/bridge/ti-sn65dsi83.c | 698 ++++++++++++++++++++++++++
> 3 files changed, 709 insertions(+)
> create mode 100644 drivers/gpu/drm/bridge/ti-sn65dsi83.c
>
> diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
> index e83b8ad0d71b..32204c5f25b7 100644
> --- a/drivers/gpu/drm/bridge/Kconfig
> +++ b/drivers/gpu/drm/bridge/Kconfig
> @@ -278,6 +278,16 @@ config DRM_TI_TFP410
> help
> Texas Instruments TFP410 DVI/HDMI Transmitter driver
>
> +config DRM_TI_SN65DSI83
> + tristate "TI SN65DSI83 and SN65DSI84 DSI to LVDS bridge"
> + depends on OF
> + select DRM_KMS_HELPER
> + select REGMAP_I2C
> + select DRM_PANEL
> + select DRM_MIPI_DSI
> + help
> + Texas Instruments SN65DSI83 and SN65DSI84 DSI to LVDS Bridge driver
> +
> config DRM_TI_SN65DSI86
> tristate "TI SN65DSI86 DSI to eDP bridge"
> depends on OF
> diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
> index b00f3b2ad572..7bb4c9df0415 100644
> --- a/drivers/gpu/drm/bridge/Makefile
> +++ b/drivers/gpu/drm/bridge/Makefile
> @@ -24,6 +24,7 @@ obj-$(CONFIG_DRM_TOSHIBA_TC358767) += tc358767.o
> obj-$(CONFIG_DRM_TOSHIBA_TC358768) += tc358768.o
> obj-$(CONFIG_DRM_TOSHIBA_TC358775) += tc358775.o
> obj-$(CONFIG_DRM_I2C_ADV7511) += adv7511/
> +obj-$(CONFIG_DRM_TI_SN65DSI83) += ti-sn65dsi83.o
> obj-$(CONFIG_DRM_TI_SN65DSI86) += ti-sn65dsi86.o
> obj-$(CONFIG_DRM_TI_TFP410) += ti-tfp410.o
> obj-$(CONFIG_DRM_TI_TPD12S015) += ti-tpd12s015.o
> diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi83.c b/drivers/gpu/drm/bridge/ti-sn65dsi83.c
> new file mode 100644
> index 000000000000..1a0a71fbe91d
> --- /dev/null
> +++ b/drivers/gpu/drm/bridge/ti-sn65dsi83.c
> @@ -0,0 +1,698 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * TI SN65DSI83,84,85 driver
> + *
> + * Currently supported:
> + * - SN65DSI83
> + * = 1x Single-link DSI ~ 1x Single-link LVDS
> + * - Supported
> + * - Single-link LVDS mode tested
> + * - SN65DSI84
> + * = 1x Single-link DSI ~ 2x Single-link or 1x Dual-link LVDS
> + * - Supported
> + * - Dual-link LVDS mode tested
> + * - 2x Single-link LVDS mode unsupported
> + * (should be easy to add by someone who has the HW)
> + * - SN65DSI85
> + * = 2x Single-link or 1x Dual-link DSI ~ 2x Single-link or 1x Dual-link LVDS
> + * - Unsupported
> + * (should be easy to add by someone who has the HW)
> + *
> + * Copyright (C) 2021 Marek Vasut <marex@xxxxxxx>
> + *
> + * Based on previous work of:
> + * Valentin Raevsky <valentin@xxxxxxxxxxxxxx>
> + * Philippe Schenker <philippe.schenker@xxxxxxxxxxx>
> + */
> +
> +#include <linux/bits.h>
> +#include <linux/clk.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/i2c.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/of_graph.h>
> +#include <linux/regmap.h>
> +
> +#include <drm/drm_atomic_helper.h>
> +#include <drm/drm_bridge.h>
> +#include <drm/drm_mipi_dsi.h>
> +#include <drm/drm_of.h>
> +#include <drm/drm_panel.h>
> +#include <drm/drm_print.h>
> +#include <drm/drm_probe_helper.h>
> +
> +/* ID registers */
> +#define REG_ID(n) (0x00 + (n))
> +/* Reset and clock registers */
> +#define REG_RC_RESET 0x09
> +#define REG_RC_RESET_SOFT_RESET BIT(0)
> +#define REG_RC_LVDS_PLL 0x0a
> +#define REG_RC_LVDS_PLL_PLL_EN_STAT BIT(7)
> +#define REG_RC_LVDS_PLL_LVDS_CLK_RANGE(n) (((n) & 0x7) << 1)
> +#define REG_RC_LVDS_PLL_HS_CLK_SRC_DPHY BIT(0)
> +#define REG_RC_DSI_CLK 0x0b
> +#define REG_RC_DSI_CLK_DSI_CLK_DIVIDER(n) (((n) & 0x1f) << 3)
> +#define REG_RC_DSI_CLK_REFCLK_MULTIPLIER(n) ((n) & 0x3)
> +#define REG_RC_PLL_EN 0x0d
> +#define REG_RC_PLL_EN_PLL_EN BIT(0)
> +/* DSI registers */
> +#define REG_DSI_LANE 0x10
> +#define REG_DSI_LANE_LEFT_RIGHT_PIXELS BIT(7) /* DSI85-only */
> +#define REG_DSI_LANE_DSI_CHANNEL_MODE_DUAL 0 /* DSI85-only */
> +#define REG_DSI_LANE_DSI_CHANNEL_MODE_2SINGLE BIT(6) /* DSI85-only */
> +#define REG_DSI_LANE_DSI_CHANNEL_MODE_SINGLE BIT(5)
> +#define REG_DSI_LANE_CHA_DSI_LANES(n) (((n) & 0x3) << 3)
> +#define REG_DSI_LANE_CHB_DSI_LANES(n) (((n) & 0x3) << 1)
> +#define REG_DSI_LANE_SOT_ERR_TOL_DIS BIT(0)
> +#define REG_DSI_EQ 0x11
> +#define REG_DSI_EQ_CHA_DSI_DATA_EQ(n) (((n) & 0x3) << 6)
> +#define REG_DSI_EQ_CHA_DSI_CLK_EQ(n) (((n) & 0x3) << 2)
> +#define REG_DSI_CLK 0x12
> +#define REG_DSI_CLK_CHA_DSI_CLK_RANGE(n) ((n) & 0xff)
> +/* LVDS registers */
> +#define REG_LVDS_FMT 0x18
> +#define REG_LVDS_FMT_DE_NEG_POLARITY BIT(7)
> +#define REG_LVDS_FMT_HS_NEG_POLARITY BIT(6)
> +#define REG_LVDS_FMT_VS_NEG_POLARITY BIT(5)
> +#define REG_LVDS_FMT_LVDS_LINK_CFG BIT(4) /* 0:AB 1:A-only */
> +#define REG_LVDS_FMT_CHA_24BPP_MODE BIT(3)
> +#define REG_LVDS_FMT_CHB_24BPP_MODE BIT(2)
> +#define REG_LVDS_FMT_CHA_24BPP_FORMAT1 BIT(1)
> +#define REG_LVDS_FMT_CHB_24BPP_FORMAT1 BIT(0)
> +#define REG_LVDS_VCOM 0x19
> +#define REG_LVDS_VCOM_CHA_LVDS_VOCM BIT(6)
> +#define REG_LVDS_VCOM_CHB_LVDS_VOCM BIT(4)
> +#define REG_LVDS_VCOM_CHA_LVDS_VOD_SWING(n) (((n) & 0x3) << 2)
> +#define REG_LVDS_VCOM_CHB_LVDS_VOD_SWING(n) ((n) & 0x3)
> +#define REG_LVDS_LANE 0x1a
> +#define REG_LVDS_LANE_EVEN_ODD_SWAP BIT(6)
> +#define REG_LVDS_LANE_CHA_REVERSE_LVDS BIT(5)
> +#define REG_LVDS_LANE_CHB_REVERSE_LVDS BIT(4)
> +#define REG_LVDS_LANE_CHA_LVDS_TERM BIT(1)
> +#define REG_LVDS_LANE_CHB_LVDS_TERM BIT(0)
> +#define REG_LVDS_CM 0x1b
> +#define REG_LVDS_CM_CHA_LVDS_CM_ADJUST(n) (((n) & 0x3) << 4)
> +#define REG_LVDS_CM_CHB_LVDS_CM_ADJUST(n) ((n) & 0x3)
> +/* Video registers */
> +#define REG_VID_CHA_ACTIVE_LINE_LENGTH_LOW 0x20
> +#define REG_VID_CHA_ACTIVE_LINE_LENGTH_HIGH 0x21
> +#define REG_VID_CHA_VERTICAL_DISPLAY_SIZE_LOW 0x24
> +#define REG_VID_CHA_VERTICAL_DISPLAY_SIZE_HIGH 0x25
> +#define REG_VID_CHA_SYNC_DELAY_LOW 0x28
> +#define REG_VID_CHA_SYNC_DELAY_HIGH 0x29
> +#define REG_VID_CHA_HSYNC_PULSE_WIDTH_LOW 0x2c
> +#define REG_VID_CHA_HSYNC_PULSE_WIDTH_HIGH 0x2d
> +#define REG_VID_CHA_VSYNC_PULSE_WIDTH_LOW 0x30
> +#define REG_VID_CHA_VSYNC_PULSE_WIDTH_HIGH 0x31
> +#define REG_VID_CHA_HORIZONTAL_BACK_PORCH 0x34
> +#define REG_VID_CHA_VERTICAL_BACK_PORCH 0x36
> +#define REG_VID_CHA_HORIZONTAL_FRONT_PORCH 0x38
> +#define REG_VID_CHA_VERTICAL_FRONT_PORCH 0x3a
> +#define REG_VID_CHA_TEST_PATTERN 0x3c
> +/* IRQ registers */
> +#define REG_IRQ_GLOBAL 0xe0
> +#define REG_IRQ_GLOBAL_IRQ_EN BIT(0)
> +#define REG_IRQ_EN 0xe1
> +#define REG_IRQ_EN_CHA_SYNCH_ERR_EN BIT(7)
> +#define REG_IRQ_EN_CHA_CRC_ERR_EN BIT(6)
> +#define REG_IRQ_EN_CHA_UNC_ECC_ERR_EN BIT(5)
> +#define REG_IRQ_EN_CHA_COR_ECC_ERR_EN BIT(4)
> +#define REG_IRQ_EN_CHA_LLP_ERR_EN BIT(3)
> +#define REG_IRQ_EN_CHA_SOT_BIT_ERR_EN BIT(2)
> +#define REG_IRQ_EN_CHA_PLL_UNLOCK_EN BIT(0)
> +#define REG_IRQ_STAT 0xe5
> +#define REG_IRQ_STAT_CHA_SYNCH_ERR BIT(7)
> +#define REG_IRQ_STAT_CHA_CRC_ERR BIT(6)
> +#define REG_IRQ_STAT_CHA_UNC_ECC_ERR BIT(5)
> +#define REG_IRQ_STAT_CHA_COR_ECC_ERR BIT(4)
> +#define REG_IRQ_STAT_CHA_LLP_ERR BIT(3)
> +#define REG_IRQ_STAT_CHA_SOT_BIT_ERR BIT(2)
> +#define REG_IRQ_STAT_CHA_PLL_UNLOCK BIT(0)
> +
> +enum sn65dsi83_model {
> + MODEL_SN65DSI83,
> + MODEL_SN65DSI84,
> +};
> +
> +struct sn65dsi83 {
> + struct drm_bridge bridge;
> + struct drm_display_mode mode;
> + struct device *dev;
> + struct regmap *regmap;
> + struct device_node *host_node;
> + struct mipi_dsi_device *dsi;
> + struct drm_bridge *panel_bridge;
> + struct gpio_desc *enable_gpio;
> + int dsi_lanes;
> + bool lvds_dual_link;
> + bool lvds_dual_link_even_odd_swap;
> + bool lvds_format_24bpp;
> + bool lvds_format_jeida;
> +};
> +
> +static const struct regmap_range sn65dsi83_readable_ranges[] = {
> + regmap_reg_range(REG_ID(0), REG_ID(8)),
> + regmap_reg_range(REG_RC_LVDS_PLL, REG_RC_DSI_CLK),
> + regmap_reg_range(REG_RC_PLL_EN, REG_RC_PLL_EN),
> + regmap_reg_range(REG_DSI_LANE, REG_DSI_CLK),
> + regmap_reg_range(REG_LVDS_FMT, REG_LVDS_CM),
> + regmap_reg_range(REG_VID_CHA_ACTIVE_LINE_LENGTH_LOW,
> + REG_VID_CHA_ACTIVE_LINE_LENGTH_HIGH),
> + regmap_reg_range(REG_VID_CHA_VERTICAL_DISPLAY_SIZE_LOW,
> + REG_VID_CHA_VERTICAL_DISPLAY_SIZE_HIGH),
> + regmap_reg_range(REG_VID_CHA_SYNC_DELAY_LOW,
> + REG_VID_CHA_SYNC_DELAY_HIGH),
> + regmap_reg_range(REG_VID_CHA_HSYNC_PULSE_WIDTH_LOW,
> + REG_VID_CHA_HSYNC_PULSE_WIDTH_HIGH),
> + regmap_reg_range(REG_VID_CHA_VSYNC_PULSE_WIDTH_LOW,
> + REG_VID_CHA_VSYNC_PULSE_WIDTH_HIGH),
> + regmap_reg_range(REG_VID_CHA_HORIZONTAL_BACK_PORCH,
> + REG_VID_CHA_HORIZONTAL_BACK_PORCH),
> + regmap_reg_range(REG_VID_CHA_VERTICAL_BACK_PORCH,
> + REG_VID_CHA_VERTICAL_BACK_PORCH),
> + regmap_reg_range(REG_VID_CHA_HORIZONTAL_FRONT_PORCH,
> + REG_VID_CHA_HORIZONTAL_FRONT_PORCH),
> + regmap_reg_range(REG_VID_CHA_VERTICAL_FRONT_PORCH,
> + REG_VID_CHA_VERTICAL_FRONT_PORCH),
> + regmap_reg_range(REG_VID_CHA_TEST_PATTERN, REG_VID_CHA_TEST_PATTERN),
> + regmap_reg_range(REG_IRQ_GLOBAL, REG_IRQ_EN),
> + regmap_reg_range(REG_IRQ_STAT, REG_IRQ_STAT),
> +};
> +
> +static const struct regmap_access_table sn65dsi83_readable_table = {
> + .yes_ranges = sn65dsi83_readable_ranges,
> + .n_yes_ranges = ARRAY_SIZE(sn65dsi83_readable_ranges),
> +};
> +
> +static const struct regmap_range sn65dsi83_writeable_ranges[] = {
> + regmap_reg_range(REG_RC_RESET, REG_RC_DSI_CLK),
> + regmap_reg_range(REG_RC_PLL_EN, REG_RC_PLL_EN),
> + regmap_reg_range(REG_DSI_LANE, REG_DSI_CLK),
> + regmap_reg_range(REG_LVDS_FMT, REG_LVDS_CM),
> + regmap_reg_range(REG_VID_CHA_ACTIVE_LINE_LENGTH_LOW,
> + REG_VID_CHA_ACTIVE_LINE_LENGTH_HIGH),
> + regmap_reg_range(REG_VID_CHA_VERTICAL_DISPLAY_SIZE_LOW,
> + REG_VID_CHA_VERTICAL_DISPLAY_SIZE_HIGH),
> + regmap_reg_range(REG_VID_CHA_SYNC_DELAY_LOW,
> + REG_VID_CHA_SYNC_DELAY_HIGH),
> + regmap_reg_range(REG_VID_CHA_HSYNC_PULSE_WIDTH_LOW,
> + REG_VID_CHA_HSYNC_PULSE_WIDTH_HIGH),
> + regmap_reg_range(REG_VID_CHA_VSYNC_PULSE_WIDTH_LOW,
> + REG_VID_CHA_VSYNC_PULSE_WIDTH_HIGH),
> + regmap_reg_range(REG_VID_CHA_HORIZONTAL_BACK_PORCH,
> + REG_VID_CHA_HORIZONTAL_BACK_PORCH),
> + regmap_reg_range(REG_VID_CHA_VERTICAL_BACK_PORCH,
> + REG_VID_CHA_VERTICAL_BACK_PORCH),
> + regmap_reg_range(REG_VID_CHA_HORIZONTAL_FRONT_PORCH,
> + REG_VID_CHA_HORIZONTAL_FRONT_PORCH),
> + regmap_reg_range(REG_VID_CHA_VERTICAL_FRONT_PORCH,
> + REG_VID_CHA_VERTICAL_FRONT_PORCH),
> + regmap_reg_range(REG_VID_CHA_TEST_PATTERN, REG_VID_CHA_TEST_PATTERN),
> + regmap_reg_range(REG_IRQ_GLOBAL, REG_IRQ_EN),
> + regmap_reg_range(REG_IRQ_STAT, REG_IRQ_STAT),
> +};
> +
> +static const struct regmap_access_table sn65dsi83_writeable_table = {
> + .yes_ranges = sn65dsi83_writeable_ranges,
> + .n_yes_ranges = ARRAY_SIZE(sn65dsi83_writeable_ranges),
> +};
> +
> +static const struct regmap_range sn65dsi83_volatile_ranges[] = {
> + regmap_reg_range(REG_RC_RESET, REG_RC_RESET),
> + regmap_reg_range(REG_RC_LVDS_PLL, REG_RC_LVDS_PLL),
> + regmap_reg_range(REG_IRQ_STAT, REG_IRQ_STAT),
> +};
> +
> +static const struct regmap_access_table sn65dsi83_volatile_table = {
> + .yes_ranges = sn65dsi83_volatile_ranges,
> + .n_yes_ranges = ARRAY_SIZE(sn65dsi83_volatile_ranges),
> +};
> +
> +static const struct regmap_config sn65dsi83_regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .rd_table = &sn65dsi83_readable_table,
> + .wr_table = &sn65dsi83_writeable_table,
> + .volatile_table = &sn65dsi83_volatile_table,
> + .cache_type = REGCACHE_RBTREE,
> + .max_register = REG_IRQ_STAT,
> +};
> +
> +static struct sn65dsi83 *bridge_to_sn65dsi83(struct drm_bridge *bridge)
> +{
> + return container_of(bridge, struct sn65dsi83, bridge);
> +}
> +
> +static int sn65dsi83_attach(struct drm_bridge *bridge,
> + enum drm_bridge_attach_flags flags)
> +{
> + struct sn65dsi83 *ctx = bridge_to_sn65dsi83(bridge);
> + struct device *dev = ctx->dev;
> + struct mipi_dsi_device *dsi;
> + struct mipi_dsi_host *host;
> + int ret = 0;
> +
> + const struct mipi_dsi_device_info info = {
> + .type = "sn65dsi83",
> + .channel = 0,
> + .node = NULL,
> + };
> +
> + host = of_find_mipi_dsi_host_by_node(ctx->host_node);
> + if (!host) {
> + dev_err(dev, "failed to find dsi host\n");
> + return -EPROBE_DEFER;
> + }
> +
> + dsi = mipi_dsi_device_register_full(host, &info);
> + if (IS_ERR(dsi)) {
> + return dev_err_probe(dev, PTR_ERR(dsi),
> + "failed to create dsi device\n");
> + }
> +
> + ctx->dsi = dsi;
> +
> + dsi->lanes = ctx->dsi_lanes;
> + dsi->format = MIPI_DSI_FMT_RGB888;
> + dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST;
> +
> + ret = mipi_dsi_attach(dsi);
> + if (ret < 0) {
> + dev_err(dev, "failed to attach dsi to host\n");
> + goto err_dsi_attach;
> + }
> +
> + return drm_bridge_attach(bridge->encoder, ctx->panel_bridge,
> + &ctx->bridge, flags);
> +
> +err_dsi_attach:
> + mipi_dsi_device_unregister(dsi);
> + return ret;
> +}
> +
> +static void sn65dsi83_pre_enable(struct drm_bridge *bridge)
> +{
> + struct sn65dsi83 *ctx = bridge_to_sn65dsi83(bridge);
> +
> + /*
> + * Reset the chip, pull EN line low for t_reset=10ms,
> + * then high for t_en=1ms.
> + */
> + regcache_mark_dirty(ctx->regmap);
> + gpiod_set_value(ctx->enable_gpio, 0);
> + usleep_range(10000, 11000);
> + gpiod_set_value(ctx->enable_gpio, 1);
> + usleep_range(1000, 1100);
> +}
> +
> +static u8 sn65dsi83_get_lvds_range(struct sn65dsi83 *ctx)
> +{
> + /*
> + * The encoding of the LVDS_CLK_RANGE is as follows:
> + * 000 - 25 MHz <= LVDS_CLK < 37.5 MHz
> + * 001 - 37.5 MHz <= LVDS_CLK < 62.5 MHz
> + * 010 - 62.5 MHz <= LVDS_CLK < 87.5 MHz
> + * 011 - 87.5 MHz <= LVDS_CLK < 112.5 MHz
> + * 100 - 112.5 MHz <= LVDS_CLK < 137.5 MHz
> + * 101 - 137.5 MHz <= LVDS_CLK <= 154 MHz
> + * which is a range of 12.5MHz..162.5MHz in 50MHz steps, except that
> + * the ends of the ranges are clamped to the supported range. Since
> + * sn65dsi83_mode_valid() already filters the valid modes and limits
> + * the clock to 25..154 MHz, the range calculation can be simplified
> + * as follows:
> + */
> + int mode_clock = ctx->mode.clock;
> +
> + if (ctx->lvds_dual_link)
> + mode_clock /= 2;
> +
> + return (mode_clock - 12500) / 25000;
> +}
> +
> +static u8 sn65dsi83_get_dsi_range(struct sn65dsi83 *ctx)
> +{
> + /*
> + * The encoding of the CHA_DSI_CLK_RANGE is as follows:
> + * 0x00 through 0x07 - Reserved
> + * 0x08 - 40 <= DSI_CLK < 45 MHz
> + * 0x09 - 45 <= DSI_CLK < 50 MHz
> + * ...
> + * 0x63 - 495 <= DSI_CLK < 500 MHz
> + * 0x64 - 500 MHz
> + * 0x65 through 0xFF - Reserved
> + * which is DSI clock in 5 MHz steps, clamped to 40..500 MHz.
> + * The DSI clock are calculated as:
> + * DSI_CLK = mode clock * bpp / dsi_data_lanes / 2
> + * the 2 is there because the bus is DDR.
> + */
> + return DIV_ROUND_UP(clamp((unsigned int)ctx->mode.clock *
> + mipi_dsi_pixel_format_to_bpp(ctx->dsi->format) /
> + ctx->dsi_lanes / 2, 40000U, 500000U), 5000U);
> +}
> +
> +static u8 sn65dsi83_get_dsi_div(struct sn65dsi83 *ctx)
> +{
> + /* The divider is (DSI_CLK / LVDS_CLK) - 1, which really is: */
> + unsigned int dsi_div = mipi_dsi_pixel_format_to_bpp(ctx->dsi->format);
> +
> + dsi_div /= ctx->dsi_lanes;
> +
> + if (!ctx->lvds_dual_link)
> + dsi_div /= 2;
> +
> + return dsi_div - 1;
> +}
> +
> +static void sn65dsi83_enable(struct drm_bridge *bridge)
> +{
> + struct sn65dsi83 *ctx = bridge_to_sn65dsi83(bridge);
> + unsigned int pval;
> + u16 val;
> + int ret;
> +
> + /* Clear reset, disable PLL */
> + regmap_write(ctx->regmap, REG_RC_RESET, 0x00);
> + regmap_write(ctx->regmap, REG_RC_PLL_EN, 0x00);
> +
> + /* Reference clock derived from DSI link clock. */
> + regmap_write(ctx->regmap, REG_RC_LVDS_PLL,
> + REG_RC_LVDS_PLL_LVDS_CLK_RANGE(sn65dsi83_get_lvds_range(ctx)) |
> + REG_RC_LVDS_PLL_HS_CLK_SRC_DPHY);
> + regmap_write(ctx->regmap, REG_DSI_CLK,
> + REG_DSI_CLK_CHA_DSI_CLK_RANGE(sn65dsi83_get_dsi_range(ctx)));
> + regmap_write(ctx->regmap, REG_RC_DSI_CLK,
> + REG_RC_DSI_CLK_DSI_CLK_DIVIDER(sn65dsi83_get_dsi_div(ctx)));
> +
> + /* Set number of DSI lanes and LVDS link config. */
> + regmap_write(ctx->regmap, REG_DSI_LANE,
> + REG_DSI_LANE_DSI_CHANNEL_MODE_SINGLE |
> + REG_DSI_LANE_CHA_DSI_LANES(~(ctx->dsi_lanes - 1)) |
> + /* CHB is DSI85-only, set to default on DSI83/DSI84 */
> + REG_DSI_LANE_CHB_DSI_LANES(3));
> + /* No equalization. */
> + regmap_write(ctx->regmap, REG_DSI_EQ, 0x00);
> +
> + /* Set up sync signal polarity. */
> + val = (ctx->mode.flags & DRM_MODE_FLAG_NHSYNC ?
> + REG_LVDS_FMT_HS_NEG_POLARITY : 0) |
> + (ctx->mode.flags & DRM_MODE_FLAG_NVSYNC ?
> + REG_LVDS_FMT_VS_NEG_POLARITY : 0);
> +
> + /* Set up bits-per-pixel, 18bpp or 24bpp. */
> + if (ctx->lvds_format_24bpp) {
> + val |= REG_LVDS_FMT_CHA_24BPP_MODE;
> + if (ctx->lvds_dual_link)
> + val |= REG_LVDS_FMT_CHB_24BPP_MODE;
> + }
> +
> + /* Set up LVDS format, JEIDA/Format 1 or SPWG/Format 2 */
> + if (ctx->lvds_format_jeida) {
> + val |= REG_LVDS_FMT_CHA_24BPP_FORMAT1;
> + if (ctx->lvds_dual_link)
> + val |= REG_LVDS_FMT_CHB_24BPP_FORMAT1;
> + }
> +
> + /* Set up LVDS output config (DSI84,DSI85) */
> + if (!ctx->lvds_dual_link)
> + val |= REG_LVDS_FMT_LVDS_LINK_CFG;
> +
> + regmap_write(ctx->regmap, REG_LVDS_FMT, val);
> + regmap_write(ctx->regmap, REG_LVDS_VCOM, 0x05);
> + regmap_write(ctx->regmap, REG_LVDS_LANE,
> + (ctx->lvds_dual_link_even_odd_swap ?
> + REG_LVDS_LANE_EVEN_ODD_SWAP : 0) |
> + REG_LVDS_LANE_CHA_LVDS_TERM |
> + REG_LVDS_LANE_CHB_LVDS_TERM);
> + regmap_write(ctx->regmap, REG_LVDS_CM, 0x00);
> +
> + regmap_bulk_write(ctx->regmap, REG_VID_CHA_ACTIVE_LINE_LENGTH_LOW,
> + &ctx->mode.hdisplay, 2);
> + regmap_bulk_write(ctx->regmap, REG_VID_CHA_VERTICAL_DISPLAY_SIZE_LOW,
> + &ctx->mode.vdisplay, 2);
> + val = 32 + 1; /* 32 + 1 pixel clock to ensure proper operation */
> + regmap_bulk_write(ctx->regmap, REG_VID_CHA_SYNC_DELAY_LOW, &val, 2);
> + val = ctx->mode.hsync_end - ctx->mode.hsync_start;
> + regmap_bulk_write(ctx->regmap, REG_VID_CHA_HSYNC_PULSE_WIDTH_LOW,
> + &val, 2);
> + val = ctx->mode.vsync_end - ctx->mode.vsync_start;
> + regmap_bulk_write(ctx->regmap, REG_VID_CHA_VSYNC_PULSE_WIDTH_LOW,
> + &val, 2);
> + regmap_write(ctx->regmap, REG_VID_CHA_HORIZONTAL_BACK_PORCH,
> + ctx->mode.htotal - ctx->mode.hsync_end);
> + regmap_write(ctx->regmap, REG_VID_CHA_VERTICAL_BACK_PORCH,
> + ctx->mode.vtotal - ctx->mode.vsync_end);
> + regmap_write(ctx->regmap, REG_VID_CHA_HORIZONTAL_FRONT_PORCH,
> + ctx->mode.hsync_start - ctx->mode.hdisplay);
> + regmap_write(ctx->regmap, REG_VID_CHA_VERTICAL_FRONT_PORCH,
> + ctx->mode.vsync_start - ctx->mode.vdisplay);
> + regmap_write(ctx->regmap, REG_VID_CHA_TEST_PATTERN, 0x00);
> +
> + /* Enable PLL */
> + regmap_write(ctx->regmap, REG_RC_PLL_EN, REG_RC_PLL_EN_PLL_EN);
> + usleep_range(3000, 4000);
> + ret = regmap_read_poll_timeout(ctx->regmap, REG_RC_LVDS_PLL, pval,
> + pval & REG_RC_LVDS_PLL_PLL_EN_STAT,
> + 1000, 100000);
> + if (ret) {
> + dev_err(ctx->dev, "failed to lock PLL, ret=%i\n", ret);
> + /* On failure, disable PLL again and exit. */
> + regmap_write(ctx->regmap, REG_RC_PLL_EN, 0x00);
> + return;
> + }
> +
> + /* Trigger reset after CSR register update. */
> + regmap_write(ctx->regmap, REG_RC_RESET, REG_RC_RESET_SOFT_RESET);
> +
> + /* Clear all errors that got asserted during initialization. */
> + regmap_read(ctx->regmap, REG_IRQ_STAT, &pval);
> + regmap_write(ctx->regmap, REG_IRQ_STAT, pval);
> +}
> +
> +static void sn65dsi83_disable(struct drm_bridge *bridge)
> +{
> + struct sn65dsi83 *ctx = bridge_to_sn65dsi83(bridge);
> +
> + /* Clear reset, disable PLL */
> + regmap_write(ctx->regmap, REG_RC_RESET, 0x00);
> + regmap_write(ctx->regmap, REG_RC_PLL_EN, 0x00);
> +}
> +
> +static void sn65dsi83_post_disable(struct drm_bridge *bridge)
> +{
> + struct sn65dsi83 *ctx = bridge_to_sn65dsi83(bridge);
> +
> + /* Put the chip in reset, pull EN line low. */
> + gpiod_set_value(ctx->enable_gpio, 0);
> +}
> +
> +static enum drm_mode_status
> +sn65dsi83_mode_valid(struct drm_bridge *bridge,
> + const struct drm_display_info *info,
> + const struct drm_display_mode *mode)
> +{
> + struct sn65dsi83 *ctx = bridge_to_sn65dsi83(bridge);
> +
> + /* LVDS output clock range 25..154 MHz */
> + if (mode->clock < 25000)
> + return MODE_CLOCK_LOW;
> + if (mode->clock > 154000)
> + return MODE_CLOCK_HIGH;
> +
> + switch (info->bus_formats[0]) {
> + case MEDIA_BUS_FMT_RGB666_1X7X3_SPWG:
> + ctx->lvds_format_24bpp = false;
> + ctx->lvds_format_jeida = false;
> + break;
> + case MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA:
> + ctx->lvds_format_24bpp = true;
> + ctx->lvds_format_jeida = true;
> + break;
> + case MEDIA_BUS_FMT_RGB888_1X7X4_SPWG:
> + ctx->lvds_format_24bpp = true;
> + ctx->lvds_format_jeida = false;
> + break;
> + default:
> + ctx->lvds_format_24bpp = true;
> + ctx->lvds_format_jeida = false;
> + /*
> + * Some bridges still don't set the correct LVDS bus pixel
> + * format, use SPWG24 default format until those are fixed.
> + */
> + dev_warn(ctx->dev,
> + "Unsupported LVDS bus format 0x%04x, please check output bridge driver. Falling back to SPWG24.\n",
> + info->bus_formats[0]);
> + break;
> + }
> +
> + return MODE_OK;
> +}
> +
> +static void sn65dsi83_mode_set(struct drm_bridge *bridge,
> + const struct drm_display_mode *mode,
> + const struct drm_display_mode *adj)
> +{
> + struct sn65dsi83 *ctx = bridge_to_sn65dsi83(bridge);
> + u32 input_bus_format = MEDIA_BUS_FMT_RGB888_1X24;
> + struct drm_encoder *encoder = bridge->encoder;
> + struct drm_device *ddev = encoder->dev;
> + struct drm_connector *connector;
> +
> + /* The DSI format is always RGB888_1X24 */
> + list_for_each_entry(connector, &ddev->mode_config.connector_list, head) {
> + if (connector->encoder != encoder)
> + continue;
> +
> + drm_display_info_set_bus_formats(&connector->display_info,
> + &input_bus_format, 1);
> + }
> +
> + ctx->mode = *adj;
> +}
> +
> +static const struct drm_bridge_funcs sn65dsi83_funcs = {
> + .attach = sn65dsi83_attach,
> + .pre_enable = sn65dsi83_pre_enable,
> + .enable = sn65dsi83_enable,
> + .disable = sn65dsi83_disable,
> + .post_disable = sn65dsi83_post_disable,
> + .mode_valid = sn65dsi83_mode_valid,
> + .mode_set = sn65dsi83_mode_set,
> +};
> +
> +static int sn65dsi83_parse_dt(struct sn65dsi83 *ctx, enum sn65dsi83_model model)
> +{
> + struct drm_bridge *panel_bridge;
> + struct device *dev = ctx->dev;
> + struct device_node *endpoint;
> + struct drm_panel *panel;
> + int ret;
> +
> + endpoint = of_graph_get_endpoint_by_regs(dev->of_node, 0, 0);
> + ctx->dsi_lanes = of_property_count_u32_elems(endpoint, "data-lanes");
> + ctx->host_node = of_graph_get_remote_port_parent(endpoint);
> + of_node_put(endpoint);
> +
> + if (ctx->dsi_lanes < 0 || ctx->dsi_lanes > 4)
> + return -EINVAL;
> + if (!ctx->host_node)
> + return -ENODEV;
> +
> + ctx->lvds_dual_link = false;
> + ctx->lvds_dual_link_even_odd_swap = false;
> + if (model != MODEL_SN65DSI83) {
> + struct device_node *port2, *port3;
> + int dual_link;
> +
> + port2 = of_graph_get_port_by_id(dev->of_node, 2);
> + port3 = of_graph_get_port_by_id(dev->of_node, 3);
> + dual_link = drm_of_lvds_get_dual_link_pixel_order(port2, port3);
> + of_node_put(port2);
> + of_node_put(port3);
> +
> + if (dual_link == DRM_LVDS_DUAL_LINK_ODD_EVEN_PIXELS) {
> + ctx->lvds_dual_link = true;
> + /* Odd pixels to LVDS Channel A, even pixels to B */
> + ctx->lvds_dual_link_even_odd_swap = false;
> + } else if (dual_link == DRM_LVDS_DUAL_LINK_EVEN_ODD_PIXELS) {
> + ctx->lvds_dual_link = true;
> + /* Even pixels to LVDS Channel A, odd pixels to B */
> + ctx->lvds_dual_link_even_odd_swap = true;
> + }
> + }
> +
> + ret = drm_of_find_panel_or_bridge(dev->of_node, 2, 0, &panel, &panel_bridge);
> + if (ret < 0)
> + return ret;
> + if (panel) {
> + panel_bridge = devm_drm_panel_bridge_add(dev, panel);
> + if (IS_ERR(panel_bridge))
> + return PTR_ERR(panel_bridge);
> + }
> +
> + ctx->panel_bridge = panel_bridge;
> +
> + return 0;
> +}
> +
> +static int sn65dsi83_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct device *dev = &client->dev;
> + enum sn65dsi83_model model;
> + struct sn65dsi83 *ctx;
> + int ret;
> +
> + ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
> + if (!ctx)
> + return -ENOMEM;
> +
> + ctx->dev = dev;
> +
> + if (dev->of_node)
> + model = (enum sn65dsi83_model)of_device_get_match_data(dev);
> + else
> + model = id->driver_data;
> +
> + ctx->enable_gpio = devm_gpiod_get(ctx->dev, "enable", GPIOD_OUT_LOW);
> + if (IS_ERR(ctx->enable_gpio))
> + return PTR_ERR(ctx->enable_gpio);
> +
> + ret = sn65dsi83_parse_dt(ctx, model);
> + if (ret)
> + return ret;
> +
> + ctx->regmap = devm_regmap_init_i2c(client, &sn65dsi83_regmap_config);
> + if (IS_ERR(ctx->regmap))
> + return PTR_ERR(ctx->regmap);
> +
> + dev_set_drvdata(dev, ctx);
> + i2c_set_clientdata(client, ctx);
> +
> + ctx->bridge.funcs = &sn65dsi83_funcs;
> + ctx->bridge.of_node = dev->of_node;
> + drm_bridge_add(&ctx->bridge);
> +
> + return 0;
> +}
> +
> +static int sn65dsi83_remove(struct i2c_client *client)
> +{
> + struct sn65dsi83 *ctx = i2c_get_clientdata(client);
> +
> + mipi_dsi_detach(ctx->dsi);
> + mipi_dsi_device_unregister(ctx->dsi);
> + drm_bridge_remove(&ctx->bridge);
> + of_node_put(ctx->host_node);
> +
> + return 0;
> +}
> +
> +static struct i2c_device_id sn65dsi83_id[] = {
> + { "ti,sn65dsi83", MODEL_SN65DSI83 },
> + { "ti,sn65dsi84", MODEL_SN65DSI84 },
> + {},
> +};
> +MODULE_DEVICE_TABLE(i2c, sn65dsi83_id);
> +
> +static const struct of_device_id sn65dsi83_match_table[] = {
> + { .compatible = "ti,sn65dsi83", .data = "" *)MODEL_SN65DSI83 },
> + { .compatible = "ti,sn65dsi84", .data = "" *)MODEL_SN65DSI84 },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, sn65dsi83_match_table);
> +
> +static struct i2c_driver sn65dsi83_driver = {
> + .probe = sn65dsi83_probe,
> + .remove = sn65dsi83_remove,
> + .id_table = sn65dsi83_id,
> + .driver = {
> + .name = "sn65dsi83",
> + .of_match_table = sn65dsi83_match_table,
> + },
> +};
> +module_i2c_driver(sn65dsi83_driver);
> +
> +MODULE_AUTHOR("Marek Vasut <marex@xxxxxxx>");
> +MODULE_DESCRIPTION("TI SN65DSI83 DSI to LVDS bridge driver");
> +MODULE_LICENSE("GPL v2");
>------------------------------
Subject: Digest Footer
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel------------------------------
End of dri-devel Digest, Vol 134, Issue 221
*******************************************
