- Add the missing doc for drm_helper_move_panel_connectors_to_head.
- Fixup any outdated stuff in existing sections. I've only looked at
those kerneldoc headers that actually resulted in a complaint from
the kerneldoc parser tool.
v2:
- Actually include the docbook snippet in the right patch.
- Fix spelling fail.
Signed-off-by: Daniel Vetter <daniel.vetter@xxxxxxxx>
---
Documentation/DocBook/drm.tmpl | 4 +++
drivers/gpu/drm/drm_crtc_helper.c | 66 +++++++++++++++++++++++++--------------
2 files changed, 46 insertions(+), 24 deletions(-)
diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl
index ca45155..43e706e 100644
--- a/Documentation/DocBook/drm.tmpl
+++ b/Documentation/DocBook/drm.tmpl
@@ -2106,6 +2106,10 @@ void intel_crt_init(struct drm_device *dev)
</listitem>
</itemizedlist>
</sect2>
+ <sect2>
+ <title>Modeset Helper Functions Reference</title>
+!Edrivers/gpu/drm/drm_crtc_helper.c
+ </sect2>
</sect1>
<!-- Internals: vertical blanking -->
diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c
index 7105168..df4aba1 100644
--- a/drivers/gpu/drm/drm_crtc_helper.c
+++ b/drivers/gpu/drm/drm_crtc_helper.c
@@ -39,6 +39,17 @@
#include <drm/drm_fb_helper.h>
#include <drm/drm_edid.h>
+/**
+ * drm_helper_move_panel_connectors_to_head() - move panels to the front in the
+ * connector list
+ * @dev: drm device to operate on
+ *
+ * Some userspace presumes that the first connected connector is the main
+ * display, where it's supposed to display e.g. the login screen. For
+ * laptops, this should be the main panel. Use this function to sort all
+ * (eDP/LVDS) panels to the front of the connector list, instead of
+ * painstakingly trying to initialize them in the right order.
+ */
void drm_helper_move_panel_connectors_to_head(struct drm_device *dev)
{
struct drm_connector *connector, *tmp;
@@ -82,22 +93,21 @@ static void drm_mode_validate_flag(struct drm_connector *connector,
/**
* drm_helper_probe_single_connector_modes - get complete set of display modes
- * @dev: DRM device
+ * @connector: connector to probe
* @maxX: max width for modes
* @maxY: max height for modes
*
* LOCKING:
* Caller must hold mode config lock.
*
- * Based on @dev's mode_config layout, scan all the connectors and try to detect
- * modes on them. Modes will first be added to the connector's probed_modes
- * list, then culled (based on validity and the @maxX, @maxY parameters) and
- * put into the normal modes list.
- *
- * Intended to be used either at bootup time or when major configuration
- * changes have occurred.
+ * Based on the helper callbacks implemented by @connector try to detect all
+ * valid modes. Modes will first be added to the connector's probed_modes list,
+ * then culled (based on validity and the @maxX, @maxY parameters) and put into
+ * the normal modes list.
*
- * FIXME: take into account monitor limits
+ * Intended to be use as a generic implementation of the ->probe() @connector
+ * callback for drivers that use the crtc helpers for output mode filtering and
+ * detection.
*
* RETURNS:
* Number of modes found on @connector.
@@ -343,17 +353,24 @@ drm_crtc_prepare_encoders(struct drm_device *dev)
}
/**
- * drm_crtc_set_mode - set a mode
+ * drm_crtc_set_mode - internal helper to set a mode
* @crtc: CRTC to program
* @mode: mode to use
* @x: width of mode
* @y: height of mode
+ * @old_fb: old framebuffer, for cleanup
*
* LOCKING:
* Caller must hold mode config lock.
*
* Try to set @mode on @crtc. Give @crtc and its associated connectors a chance
- * to fixup or reject the mode prior to trying to set it.
+ * to fixup or reject the mode prior to trying to set it. This is an internal
+ * helper that drivers could e.g. use to update properties that require the
+ * entire output pipe to be disabled and re-enabled in a new configuration. For
+ * example for changing whether audio is enabled on a hdmi link or for changing
+ * panel fitter or dither attributes. It is also called by the
+ * drm_crtc_helper_set_config() helper function to drive the mode setting
+ * sequence.
*
* RETURNS:
* True if the mode was set successfully, or false otherwise.
@@ -509,20 +526,19 @@ drm_crtc_helper_disable(struct drm_crtc *crtc)
/**
* drm_crtc_helper_set_config - set a new config from userspace
- * @crtc: CRTC to setup
- * @crtc_info: user provided configuration
- * @new_mode: new mode to set
- * @connector_set: set of connectors for the new config
- * @fb: new framebuffer
+ * @set: mode set configuration
*
* LOCKING:
* Caller must hold mode config lock.
*
- * Setup a new configuration, provided by the user in @crtc_info, and enable
- * it.
+ * Setup a new configuration, provided by the upper layers (either an ioctl call
+ * from userspace or internally e.g. from the fbdev suppport code) in @set, and
+ * enable it. This is the main helper functions for drivers that implement
+ * kernel mode setting with the crtc helper functions and the assorted
+ * ->prepare(), ->modeset() and ->commit() helper callbacks.
*
* RETURNS:
- * Zero. (FIXME)
+ * Returns 0 on success, -ERRNO on failure.
*/
int drm_crtc_helper_set_config(struct drm_mode_set *set)
{
@@ -818,12 +834,14 @@ static int drm_helper_choose_crtc_dpms(struct drm_crtc *crtc)
}
/**
- * drm_helper_connector_dpms
- * @connector affected connector
- * @mode DPMS mode
+ * drm_helper_connector_dpms() - connector dpms helper implementation
+ * @connector: affected connector
+ * @mode: DPMS mode
*
- * Calls the low-level connector DPMS function, then
- * calls appropriate encoder and crtc DPMS functions as well
+ * This is the main helper function provided by the crtc helper framework for
+ * implementing the DPMS connector attribute. It computes the new desired DPMS
+ * state for all encoders and crtcs in the output mesh and calls the ->dpms()
+ * callback provided by the driver appropriately.
*/
void drm_helper_connector_dpms(struct drm_connector *connector, int mode)
{
--
1.7.11.7
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
