[v1] drm/msm/disp/dpu1: icc path needs to be set before dpu runtime resume

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Kalyan Thota <kalyant@xxxxxxxxxxxxxx>

DPU runtime resume will request for a min vote on the AXI bus as
it is a necessary step before turning ON the AXI clock.

The change does below
1) Move the icc path set before requesting runtime get_sync.
2) remove the dependency of hw catalog for min ib vote
as it is initialized at a later point.

Signed-off-by: Kalyan Thota <kalyan_t@xxxxxxxxxxxxxx>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
index ed636f1..cab387f 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
@@ -44,6 +44,8 @@
 #define DPU_DEBUGFS_DIR "msm_dpu"
 #define DPU_DEBUGFS_HWMASKNAME "hw_log_mask"
 
+#define MIN_IB_BW	400000000ULL /* Min ib vote 400MB */
+
 static int dpu_kms_hw_init(struct msm_kms *kms);
 static void _dpu_kms_mmu_destroy(struct dpu_kms *dpu_kms);
 
@@ -932,6 +934,9 @@ static int dpu_kms_hw_init(struct msm_kms *kms)
 		DPU_DEBUG("REG_DMA is not defined");
 	}
 
+	if (of_device_is_compatible(dev->dev->of_node, "qcom,sc7180-mdss"))
+		dpu_kms_parse_data_bus_icc_path(dpu_kms);
+
 	pm_runtime_get_sync(&dpu_kms->pdev->dev);
 
 	dpu_kms->core_rev = readl_relaxed(dpu_kms->mmio + 0x0);
@@ -1037,9 +1042,6 @@ static int dpu_kms_hw_init(struct msm_kms *kms)
 
 	dpu_vbif_init_memtypes(dpu_kms);
 
-	if (of_device_is_compatible(dev->dev->of_node, "qcom,sc7180-mdss"))
-		dpu_kms_parse_data_bus_icc_path(dpu_kms);
-
 	pm_runtime_put_sync(&dpu_kms->pdev->dev);
 
 	return 0;
@@ -1196,10 +1198,10 @@ static int __maybe_unused dpu_runtime_resume(struct device *dev)
 
 	ddev = dpu_kms->dev;
 
+	WARN_ON(!(dpu_kms->num_paths));
 	/* Min vote of BW is required before turning on AXI clk */
 	for (i = 0; i < dpu_kms->num_paths; i++)
-		icc_set_bw(dpu_kms->path[i], 0,
-			dpu_kms->catalog->perf.min_dram_ib);
+		icc_set_bw(dpu_kms->path[i], 0, Bps_to_icc(MIN_IB_BW));
 
 	rc = msm_dss_enable_clk(mp->clk_config, mp->num_clk, true);
 	if (rc) {
-- 
2.7.4

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux