From: Yongqiang Niu <yongqiang.niu@xxxxxxxxxxxx> Enable dither function to improve the display quality for dither supported bpc 4, 6, 8. For not supported bpc, use relay mode. Signed-off-by: Yongqiang Niu <yongqiang.niu@xxxxxxxxxxxx> Signed-off-by: Hsin-Yi Wang <hsinyi@xxxxxxxxxxxx> --- drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c index ac2cb25620357..5761dd15eedf2 100644 --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c @@ -53,6 +53,7 @@ #define DITHER_EN BIT(0) #define DISP_DITHER_CFG 0x0020 #define DITHER_RELAY_MODE BIT(0) +#define DITHER_ENGINE_EN BIT(1) #define DISP_DITHER_SIZE 0x0030 #define LUT_10BIT_MASK 0x03ff @@ -314,9 +315,17 @@ static void mtk_dither_config(struct device *dev, unsigned int w, unsigned int bpc, struct cmdq_pkt *cmdq_pkt) { struct mtk_ddp_comp_dev *priv = dev_get_drvdata(dev); - - mtk_ddp_write(cmdq_pkt, h << 16 | w, &priv->cmdq_reg, priv->regs, DISP_DITHER_SIZE); - mtk_ddp_write(cmdq_pkt, DITHER_RELAY_MODE, &priv->cmdq_reg, priv->regs, DISP_DITHER_CFG); + bool valid_bpc = (bpc == 4 || bpc == 6 || bpc == 8); + + mtk_ddp_write(cmdq_pkt, h << 16 | w, &priv->cmdq_reg, priv->regs, + DISP_DITHER_SIZE); + if (valid_bpc) + mtk_dither_set_common(priv->regs, &priv->cmdq_reg, bpc, + DISP_DITHER_CFG, DITHER_ENGINE_EN, + cmdq_pkt); + else + mtk_ddp_write(cmdq_pkt, DITHER_RELAY_MODE, &priv->cmdq_reg, + priv->regs, DISP_DITHER_CFG); } static void mtk_dither_start(struct device *dev) -- 2.30.0.365.g02bc693789-goog _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel