Hi, Here's a series introducing the CEC support for the BCM2711 found on the RaspberryPi4. The BCM2711 HDMI controller uses a similar layout for the CEC registers, the main difference being that the interrupt handling part is now shared between both HDMI controllers. This series is mainly about fixing a couple of bugs, reworking the driver to support having two different interrupts, one for each direction, provided by an external irqchip, and enables the irqchip driver for the controller we have. This has been tested on an RPi3 and RPi4, but requires the latest firmware. It's is based on the 10 and 12 bpc series. Here is the cec-compliance output: pi@raspberrypi:~$ cec-ctl --tuner -p 1.0.0.0 The CEC adapter doesn't allow setting the physical address manually, ignore this option. Driver Info: Driver Name : vc4_hdmi Adapter Name : vc4 Capabilities : 0x0000010e Logical Addresses Transmit Passthrough Driver version : 5.10.0 Available Logical Addresses: 1 Physical Address : 1.0.0.0 Logical Address Mask : 0x0008 CEC Version : 2.0 Vendor ID : 0x000c03 (HDMI) OSD Name : Tuner Logical Addresses : 1 (Allow RC Passthrough) Logical Address : 3 (Tuner 1) Primary Device Type : Tuner Logical Address Type : Tuner All Device Types : Tuner RC TV Profile : None Device Features : None pi@raspberrypi:~$ cec-compliance cec-compliance SHA : not available Driver Info: Driver Name : vc4_hdmi Adapter Name : vc4 Capabilities : 0x0000010e Logical Addresses Transmit Passthrough Driver version : 5.10.0 Available Logical Addresses: 1 Physical Address : 1.0.0.0 Logical Address Mask : 0x0008 CEC Version : 2.0 Vendor ID : 0x000c03 (HDMI) OSD Name : Tuner Logical Addresses : 1 (Allow RC Passthrough) Logical Address : 3 (Tuner 1) Primary Device Type : Tuner Logical Address Type : Tuner All Device Types : Tuner RC TV Profile : None Device Features : None Compliance test for device /dev/cec0: The test results mean the following: OK Supported correctly by the device. OK (Not Supported) Not supported and not mandatory for the device. OK (Presumed) Presumably supported. Manually check to confirm. OK (Unexpected) Supported correctly but is not expected to be supported for this device. OK (Refused) Supported by the device, but was refused. FAIL Failed and was expected to be supported by this device. Find remote devices: Polling: OK Network topology: System Information for device 0 (TV) from device 3 (Tuner 1): CEC Version : 2.0 Physical Address : 0.0.0.0 Primary Device Type : TV Vendor ID : 0x000c03 OSD Name : 'TV ' Power Status : Tx, OK, Rx, OK, Feature Abort Total: 1, Succeeded: 1, Failed: 0, Warnings: 0 pi@raspberrypi:~$ cec-ctl -d1 --tuner -p 1.0.0.0 The CEC adapter doesn't allow setting the physical address manually, ignore this option. Driver Info: Driver Name : vc4_hdmi Adapter Name : vc4 Capabilities : 0x0000010e Logical Addresses Transmit Passthrough Driver version : 5.10.0 Available Logical Addresses: 1 Physical Address : 1.0.0.0 Logical Address Mask : 0x0008 CEC Version : 2.0 Vendor ID : 0x000c03 (HDMI) OSD Name : Tuner Logical Addresses : 1 (Allow RC Passthrough) Logical Address : 3 (Tuner 1) Primary Device Type : Tuner Logical Address Type : Tuner All Device Types : Tuner RC TV Profile : None Device Features : None pi@raspberrypi:~$ cec-compliance -d1 cec-compliance SHA : not available Driver Info: Driver Name : vc4_hdmi Adapter Name : vc4 Capabilities : 0x0000010e Logical Addresses Transmit Passthrough Driver version : 5.10.0 Available Logical Addresses: 1 Physical Address : 1.0.0.0 Logical Address Mask : 0x0008 CEC Version : 2.0 Vendor ID : 0x000c03 (HDMI) OSD Name : Tuner Logical Addresses : 1 (Allow RC Passthrough) Logical Address : 3 (Tuner 1) Primary Device Type : Tuner Logical Address Type : Tuner All Device Types : Tuner RC TV Profile : None Device Features : None Compliance test for device /dev/cec1: The test results mean the following: OK Supported correctly by the device. OK (Not Supported) Not supported and not mandatory for the device. OK (Presumed) Presumably supported. Manually check to confirm. OK (Unexpected) Supported correctly but is not expected to be supported for this device. OK (Refused) Supported by the device, but was refused. FAIL Failed and was expected to be supported by this device. Find remote devices: Polling: OK Network topology: System Information for device 0 (TV) from device 3 (Tuner 1): CEC Version : 2.0 Physical Address : 0.0.0.0 Primary Device Type : TV Vendor ID : 0x000c03 OSD Name : 'TV ' Power Status : Tx, OK, Rx, OK, Feature Abort Total: 1, Succeeded: 1, Failed: 0, Warnings: 0 And for the hotplug detect test: pi@raspberrypi:~$ cec-ctl --playback Driver Info: Driver Name : vc4_hdmi Adapter Name : vc4 Capabilities : 0x0000010e Logical Addresses Transmit Passthrough Driver version : 5.10.0 Available Logical Addresses: 1 Physical Address : f.f.f.f Logical Address Mask : 0x0000 CEC Version : 2.0 Vendor ID : 0x000c03 (HDMI) OSD Name : Playback Logical Addresses : 1 (Allow RC Passthrough) Logical Address : Not Allocated Primary Device Type : Playback Logical Address Type : Playback All Device Types : Playback RC TV Profile : None Device Features : None pi@raspberrypi:~$ cec-ctl -t0 --image-view-on Driver Info: Driver Name : vc4_hdmi Adapter Name : vc4 Capabilities : 0x0000010e Logical Addresses Transmit Passthrough Driver version : 5.10.0 Available Logical Addresses: 1 Physical Address : f.f.f.f Logical Address Mask : 0x0000 CEC Version : 2.0 Vendor ID : 0x000c03 (HDMI) OSD Name : Playback Logical Addresses : 1 (Allow RC Passthrough) Logical Address : Not Allocated Primary Device Type : Playback Logical Address Type : Playback All Device Types : Playback RC TV Profile : None Device Features : None Transmit from Unregistered to TV (15 to 0): CEC_MSG_IMAGE_VIEW_ON (0x04) Sequence: 1 Tx Timestamp: 9182.611s pi@raspberrypi:~$ cec-ctl -d1 --playback Driver Info: Driver Name : vc4_hdmi Adapter Name : vc4 Capabilities : 0x0000010e Logical Addresses Transmit Passthrough Driver version : 5.10.0 Available Logical Addresses: 1 Physical Address : f.f.f.f Logical Address Mask : 0x0000 CEC Version : 2.0 Vendor ID : 0x000c03 (HDMI) OSD Name : Playback Logical Addresses : 1 (Allow RC Passthrough) Logical Address : Not Allocated Primary Device Type : Playback Logical Address Type : Playback All Device Types : Playback RC TV Profile : None Device Features : None pi@raspberrypi:~$ cec-ctl -d1 -t0 --image-view-on Driver Info: Driver Name : vc4_hdmi Adapter Name : vc4 Capabilities : 0x0000010e Logical Addresses Transmit Passthrough Driver version : 5.10.0 Available Logical Addresses: 1 Physical Address : f.f.f.f Logical Address Mask : 0x0000 CEC Version : 2.0 Vendor ID : 0x000c03 (HDMI) OSD Name : Playback Logical Addresses : 1 (Allow RC Passthrough) Logical Address : Not Allocated Primary Device Type : Playback Logical Address Type : Playback All Device Types : Playback RC TV Profile : None Device Features : None Transmit from Unregistered to TV (15 to 0): CEC_MSG_IMAGE_VIEW_ON (0x04) Sequence: 1 Tx Timestamp: 9207.191s With the pulse-eight side reporting: $ sudo cec-ctl -M Driver Info: Driver Name : pulse8-cec Adapter Name : serio0 Capabilities : 0x0000003f Physical Address Logical Addresses Transmit Passthrough Remote Control Support Monitor All Driver version : 5.9.16 Available Logical Addresses: 1 Connector Info : None Physical Address : 0.0.0.0 Logical Address Mask : 0x0001 CEC Version : 2.0 Vendor ID : 0x000c03 (HDMI) OSD Name : 'TV ' Logical Addresses : 1 (Allow RC Passthrough) Logical Address : 0 (TV) Primary Device Type : TV Logical Address Type : TV All Device Types : TV RC TV Profile : None Device Features : None Initial Event: State Change: PA: 0.0.0.0, LA mask: 0x0001, Conn Info: no Received from Unregistered to TV (15 to 0): IMAGE_VIEW_ON (0x04) Received from Unregistered to TV (15 to 0): IMAGE_VIEW_ON (0x04) Let me know what you think, Maxime Changes from v1: - Removed the irqchip patch in favor of a select in mach-bcm - Fixed HDMI1 interrupt numbers - Removed redundant call to drm_connector_update_edid_property - Fixed the condition in vc4_hdmi_connector_detect - Added the tags - Rebased on top of drm-misc-next-2021-01-06 Dom Cobley (5): drm/vc4: hdmi: Move hdmi reset to bind drm/vc4: hdmi: Fix register offset with longer CEC messages drm/vc4: hdmi: Fix up CEC registers drm/vc4: hdmi: Restore cec physical address on reconnect drm/vc4: hdmi: Remove cec_available flag Maxime Ripard (10): ARM: bcm: Select BRCMSTB_L2_IRQ for bcm2835 drm/vc4: hdmi: Compute the CEC clock divider from the clock rate drm/vc4: hdmi: Update the CEC clock divider on HSM rate change drm/vc4: hdmi: Introduce a CEC clock drm/vc4: hdmi: Split the interrupt handlers drm/vc4: hdmi: Support BCM2711 CEC interrupt setup drm/vc4: hdmi: Don't register the CEC adapter if there's no interrupts dt-binding: display: bcm2711-hdmi: Add CEC and hotplug interrupts ARM: dts: bcm2711: Add the BSC interrupt controller ARM: dts: bcm2711: Add the CEC interrupt controller .../bindings/display/brcm,bcm2711-hdmi.yaml | 20 +- arch/arm/boot/dts/bcm2711.dtsi | 30 +++ arch/arm/mach-bcm/Kconfig | 1 + arch/arm64/Kconfig.platforms | 1 + drivers/gpu/drm/vc4/vc4_hdmi.c | 223 ++++++++++++++---- drivers/gpu/drm/vc4/vc4_hdmi.h | 11 +- drivers/gpu/drm/vc4/vc4_hdmi_regs.h | 4 +- 7 files changed, 234 insertions(+), 56 deletions(-) -- 2.29.2 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel