On Thu, Oct 04, 2012 at 11:35:35PM +0200, Guennadi Liakhovetski wrote: > > +optional properties: > > + - hsync-active-high (bool): Hsync pulse is active high > > + - vsync-active-high (bool): Vsync pulse is active high > > For the above two we also considered using bool properties but eventually > settled down with integer ones: > > - hsync-active = <1> > > for active-high and 0 for active low. This has the added advantage of > being able to omit this property in the .dts, which then doesn't mean, > that the polarity is active low, but rather, that the hsync line is not > used on this hardware. So, maybe it would be good to use the same binding > here too? Philipp, this is the same argumentation as we discussed yesterday for the dual-link LVDS option, so that one could be modelled in a similar way. rsc -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel
