On 15/12/20 3:50 am, Aurabindo Pillai wrote: > [Why&How] > Inorder to enable freesync video mode, driver adds extra > modes based on preferred modes for common freesync frame rates. > When commiting these mode changes, a full modeset is not needed. > If the change in only in the front porch timing value, skip full > modeset and continue using the same stream. > > Signed-off-by: Aurabindo Pillai <aurabindo.pillai@xxxxxxx> > Acked-by: Christian König <christian.koenig at amd.com> > --- > .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 210 +++++++++++++++--- > .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h | 1 + > 2 files changed, 179 insertions(+), 32 deletions(-) > > diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c > index c1ffd33e9d83..4ba6be59dcd5 100644 > --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c > +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c > @@ -213,6 +213,9 @@ static bool amdgpu_dm_psr_disable_all(struct amdgpu_display_manager *dm); > static const struct drm_format_info * > amd_get_format_info(const struct drm_mode_fb_cmd2 *cmd); > > +static bool > +is_timing_unchanged_for_freesync(struct drm_crtc_state *old_crtc_state, > + struct drm_crtc_state *new_crtc_state); Do we need this forward declaration for a static function ? > /* > * dm_vblank_get_counter > * > @@ -4940,7 +4943,8 @@ static void fill_stream_properties_from_drm_display_mode( > const struct drm_connector *connector, > const struct drm_connector_state *connector_state, > const struct dc_stream_state *old_stream, > - int requested_bpc) > + int requested_bpc, > + bool is_in_modeset) > { > struct dc_crtc_timing *timing_out = &stream->timing; > const struct drm_display_info *info = &connector->display_info; > @@ -4995,19 +4999,28 @@ static void fill_stream_properties_from_drm_display_mode( > timing_out->hdmi_vic = hv_frame.vic; > } > > - timing_out->h_addressable = mode_in->crtc_hdisplay; > - timing_out->h_total = mode_in->crtc_htotal; > - timing_out->h_sync_width = > - mode_in->crtc_hsync_end - mode_in->crtc_hsync_start; > - timing_out->h_front_porch = > - mode_in->crtc_hsync_start - mode_in->crtc_hdisplay; > - timing_out->v_total = mode_in->crtc_vtotal; > - timing_out->v_addressable = mode_in->crtc_vdisplay; > - timing_out->v_front_porch = > - mode_in->crtc_vsync_start - mode_in->crtc_vdisplay; > - timing_out->v_sync_width = > - mode_in->crtc_vsync_end - mode_in->crtc_vsync_start; > - timing_out->pix_clk_100hz = mode_in->crtc_clock * 10; > + if (is_in_modeset) { > + timing_out->h_addressable = mode_in->hdisplay; > + timing_out->h_total = mode_in->htotal; > + timing_out->h_sync_width = mode_in->hsync_end - mode_in->hsync_start; > + timing_out->h_front_porch = mode_in->hsync_start - mode_in->hdisplay; > + timing_out->v_total = mode_in->vtotal; > + timing_out->v_addressable = mode_in->vdisplay; > + timing_out->v_front_porch = mode_in->vsync_start - mode_in->vdisplay; > + timing_out->v_sync_width = mode_in->vsync_end - mode_in->vsync_start; > + timing_out->pix_clk_100hz = mode_in->clock * 10; > + } else { > + timing_out->h_addressable = mode_in->crtc_hdisplay; > + timing_out->h_total = mode_in->crtc_htotal; > + timing_out->h_sync_width = mode_in->crtc_hsync_end - mode_in->crtc_hsync_start; > + timing_out->h_front_porch = mode_in->crtc_hsync_start - mode_in->crtc_hdisplay; > + timing_out->v_total = mode_in->crtc_vtotal; > + timing_out->v_addressable = mode_in->crtc_vdisplay; > + timing_out->v_front_porch = mode_in->crtc_vsync_start - mode_in->crtc_vdisplay; > + timing_out->v_sync_width = mode_in->crtc_vsync_end - mode_in->crtc_vsync_start; > + timing_out->pix_clk_100hz = mode_in->crtc_clock * 10; > + } > + > timing_out->aspect_ratio = get_aspect_ratio(mode_in); > > stream->output_color_space = get_output_color_space(timing_out); > @@ -5227,6 +5240,24 @@ get_highest_refresh_rate_mode(struct amdgpu_dm_connector *aconnector, > return m_pref; > } > > +static bool is_freesync_video_mode(struct drm_display_mode *mode, > + struct amdgpu_dm_connector *aconnector) > +{ > + struct drm_display_mode *high_mode; > + > + high_mode = get_highest_refresh_rate_mode(aconnector, false); > + if (!high_mode || !mode) > + return false; > + > + if (high_mode->clock == 0 || > + high_mode->hdisplay != mode->hdisplay || > + high_mode->vdisplay != mode->vdisplay || > + high_mode->clock != mode->clock) > + return false; > + else > + return true; > +} > + > static struct dc_stream_state * > create_stream_for_sink(struct amdgpu_dm_connector *aconnector, > const struct drm_display_mode *drm_mode, > @@ -5240,15 +5271,21 @@ create_stream_for_sink(struct amdgpu_dm_connector *aconnector, > dm_state ? &dm_state->base : NULL; > struct dc_stream_state *stream = NULL; > struct drm_display_mode mode = *drm_mode; > + struct drm_display_mode saved_mode; > + struct drm_display_mode *freesync_mode = NULL; > bool native_mode_found = false; > bool scale = dm_state ? (dm_state->scaling != RMX_OFF) : false; > int mode_refresh; > int preferred_refresh = 0; > + bool is_fs_vid_mode = 0; > #if defined(CONFIG_DRM_AMD_DC_DCN) > struct dsc_dec_dpcd_caps dsc_caps; > uint32_t link_bandwidth_kbps; > #endif > struct dc_sink *sink = NULL; > + > + memset(&saved_mode, 0, sizeof(struct drm_display_mode)); > + > if (aconnector == NULL) { > DRM_ERROR("aconnector is NULL!\n"); > return stream; > @@ -5301,25 +5338,39 @@ create_stream_for_sink(struct amdgpu_dm_connector *aconnector, > */ > DRM_DEBUG_DRIVER("No preferred mode found\n"); > } else { > - decide_crtc_timing_for_drm_display_mode( > + is_fs_vid_mode = is_freesync_video_mode(&mode, aconnector); > + if (is_fs_vid_mode) { > + freesync_mode = get_highest_refresh_rate_mode(aconnector, false); > + saved_mode = mode; > + mode = *freesync_mode; > + } > + > + if (!is_fs_vid_mode) This should go as else {} case for above if() instead of a new check > + decide_crtc_timing_for_drm_display_mode( > &mode, preferred_mode, > dm_state ? (dm_state->scaling != RMX_OFF) : false); > + > preferred_refresh = drm_mode_vrefresh(preferred_mode); > } > > if (!dm_state) > drm_mode_set_crtcinfo(&mode, 0); > > - /* > + if (dm_state && is_fs_vid_mode) > + drm_mode_set_crtcinfo(&saved_mode, 0); Why is this step required ? > + > + /* > * If scaling is enabled and refresh rate didn't change > * we copy the vic and polarities of the old timings > */ > - if (!scale || mode_refresh != preferred_refresh) > - fill_stream_properties_from_drm_display_mode(stream, > - &mode, &aconnector->base, con_state, NULL, requested_bpc); > + if (!(scale && is_fs_vid_mode) || mode_refresh != preferred_refresh) > + fill_stream_properties_from_drm_display_mode( > + stream, &mode, &aconnector->base, con_state, NULL, > + requested_bpc, dm_state ? 1 : 0); > else > - fill_stream_properties_from_drm_display_mode(stream, > - &mode, &aconnector->base, con_state, old_stream, requested_bpc); > + fill_stream_properties_from_drm_display_mode( > + stream, &mode, &aconnector->base, con_state, old_stream, > + requested_bpc, dm_state ? 1 : 0); > > stream->timing.flags.DSC = 0; > > @@ -7844,13 +7895,29 @@ static void update_stream_irq_parameters( > if (new_crtc_state->vrr_supported && > config.min_refresh_in_uhz && > config.max_refresh_in_uhz) { > + /* > + * if freesync compatible mode was set, config.state will be set > + * in atomic check > + */ > + if (config.state == VRR_STATE_ACTIVE_FIXED && > + config.fixed_refresh_in_uhz && config.max_refresh_in_uhz && > + config.min_refresh_in_uhz && > + (!drm_atomic_crtc_needs_modeset(&new_crtc_state->base) || > + new_crtc_state->freesync_video_mode)) { > + vrr_params.max_refresh_in_uhz = config.max_refresh_in_uhz; > + vrr_params.min_refresh_in_uhz = config.min_refresh_in_uhz; > + vrr_params.fixed_refresh_in_uhz = config.fixed_refresh_in_uhz; > + vrr_params.state = VRR_STATE_ACTIVE_FIXED; > + goto out; > + } > + > config.state = new_crtc_state->base.vrr_enabled ? > VRR_STATE_ACTIVE_VARIABLE : > VRR_STATE_INACTIVE; > - } else { > + } else conventionally, if a if() condition has {}, its else condition should also have {}, even if it's a single statement. So you can skip this change. > config.state = VRR_STATE_UNSUPPORTED; > - } > > +out: > mod_freesync_build_vrr_params(dm->freesync_module, > new_stream, > &config, &vrr_params); > @@ -8168,7 +8235,9 @@ static void amdgpu_dm_commit_planes(struct drm_atomic_state *state, > * as part of commit. > */ > if (amdgpu_dm_vrr_active(dm_old_crtc_state) != > - amdgpu_dm_vrr_active(acrtc_state)) { > + amdgpu_dm_vrr_active(acrtc_state) || > + acrtc_state->freesync_config.state == VRR_STATE_ACTIVE_FIXED || > + acrtc_state->freesync_video_mode) { > spin_lock_irqsave(&pcrtc->dev->event_lock, flags); > dc_stream_adjust_vmin_vmax( > dm->dc, acrtc_state->stream, > @@ -8864,6 +8933,7 @@ static void get_freesync_config_for_crtc( > to_amdgpu_dm_connector(new_con_state->base.connector); > struct drm_display_mode *mode = &new_crtc_state->base.mode; > int vrefresh = drm_mode_vrefresh(mode); > + bool fs_vid_mode = false; > > new_crtc_state->vrr_supported = new_con_state->freesync_capable && > vrefresh >= aconnector->min_vfreq && > @@ -8871,17 +8941,26 @@ static void get_freesync_config_for_crtc( > > if (new_crtc_state->vrr_supported) { > new_crtc_state->stream->ignore_msa_timing_param = true; > - config.state = new_crtc_state->base.vrr_enabled ? > - VRR_STATE_ACTIVE_VARIABLE : > - VRR_STATE_INACTIVE; > - config.min_refresh_in_uhz = > - aconnector->min_vfreq * 1000000; > - config.max_refresh_in_uhz = > - aconnector->max_vfreq * 1000000; > + fs_vid_mode = new_crtc_state->freesync_config.state == VRR_STATE_ACTIVE_FIXED || > + new_crtc_state->freesync_video_mode; > + > + config.min_refresh_in_uhz = aconnector->min_vfreq * 1000000; > + config.max_refresh_in_uhz = aconnector->max_vfreq * 1000000; > config.vsif_supported = true; > config.btr = true; > - } > > + if (fs_vid_mode) { > + config.state = VRR_STATE_ACTIVE_FIXED; > + config.fixed_refresh_in_uhz = new_crtc_state->freesync_config.fixed_refresh_in_uhz; > + goto out; > + } > + else if (new_crtc_state->base.vrr_enabled && !fs_vid_mode) > + config.state = VRR_STATE_ACTIVE_VARIABLE; > + else > + config.state = VRR_STATE_INACTIVE; > + > + } > +out: > new_crtc_state->freesync_config = config; > } > > @@ -8894,6 +8973,51 @@ static void reset_freesync_config_for_crtc( > sizeof(new_crtc_state->vrr_infopacket)); > } > > +static bool > +is_timing_unchanged_for_freesync(struct drm_crtc_state *old_crtc_state, > + struct drm_crtc_state *new_crtc_state) > +{ > + struct drm_display_mode old_mode, new_mode; > + > + if (!old_crtc_state || !new_crtc_state) > + return false; > + > + old_mode = old_crtc_state->mode; > + new_mode = new_crtc_state->mode; > + > + if (old_mode.clock == new_mode.clock && > + old_mode.hdisplay == new_mode.hdisplay && > + old_mode.vdisplay == new_mode.vdisplay && > + old_mode.htotal == new_mode.htotal && > + old_mode.vtotal != new_mode.vtotal && > + old_mode.hsync_start == new_mode.hsync_start && > + old_mode.vsync_start != new_mode.vsync_start && > + old_mode.hsync_end == new_mode.hsync_end && > + old_mode.vsync_end != new_mode.vsync_end && > + old_mode.hskew == new_mode.hskew && > + old_mode.vscan == new_mode.vscan && > + (old_mode.vsync_end - old_mode.vsync_start) == > + (new_mode.vsync_end - new_mode.vsync_start)) > + return true; > + > + return false; > +} > + > +static void set_freesync_fixed_config(struct dm_crtc_state *dm_new_crtc_state) { > + uint64_t num, den, res; > + struct drm_crtc_state *new_crtc_state = &dm_new_crtc_state->base; > + > + dm_new_crtc_state->freesync_config.state = VRR_STATE_ACTIVE_FIXED; > + > + num = (unsigned long long)new_crtc_state->mode.clock * 1000 * 1000000; > + den = (unsigned long long)new_crtc_state->mode.htotal * > + (unsigned long long)new_crtc_state->mode.vtotal; > + > + res = div_u64(num, den); > + dm_new_crtc_state->freesync_config.fixed_refresh_in_uhz = res; > + dm_new_crtc_state->freesync_video_mode = true; > +} > + > static int dm_update_crtc_state(struct amdgpu_display_manager *dm, > struct drm_atomic_state *state, > struct drm_crtc *crtc, > @@ -8984,6 +9108,11 @@ static int dm_update_crtc_state(struct amdgpu_display_manager *dm, > * TODO: Refactor this function to allow this check to work > * in all conditions. > */ > + if (dm_new_crtc_state->stream && > + is_timing_unchanged_for_freesync(new_crtc_state, old_crtc_state) && > + amdgpu_exp_freesync_vid_mode) keeping this flag check before the function call might allow the compiler to save the function call, when this flag is disabled. > + goto skip_modeset; > + > if (dm_new_crtc_state->stream && > dc_is_stream_unchanged(new_stream, dm_old_crtc_state->stream) && > dc_is_stream_scaling_unchanged(new_stream, dm_old_crtc_state->stream)) { > @@ -9015,6 +9144,23 @@ static int dm_update_crtc_state(struct amdgpu_display_manager *dm, > if (!dm_old_crtc_state->stream) > goto skip_modeset; > > + if (dm_new_crtc_state->stream && > + is_timing_unchanged_for_freesync(new_crtc_state, old_crtc_state) && > + amdgpu_exp_freesync_vid_mode) { same here > + new_crtc_state->mode_changed = false; > + DRM_DEBUG_DRIVER( > + "Mode change not required for front porch change, " > + "setting mode_changed to %d", > + new_crtc_state->mode_changed); > + > + set_freesync_fixed_config(dm_new_crtc_state); > + > + goto skip_modeset; > + } else if (aconnector && > + is_freesync_video_mode(&new_crtc_state->mode, aconnector) && > + amdgpu_exp_freesync_vid_mode) > + set_freesync_fixed_config(dm_new_crtc_state); > + > ret = dm_atomic_get_state(state, &dm_state); > if (ret) > goto fail; > diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h > index f5a5f1ad7dba..fd5fb9dafded 100644 > --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h > +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h > @@ -455,6 +455,7 @@ struct dm_crtc_state { > > bool freesync_timing_changed; > bool freesync_vrr_info_changed; > + bool freesync_video_mode; > > bool dsc_force_changed; > bool vrr_supported; With the minor comments fixed/explained above, this patch is Reviewed-by: Shashank Sharma <shashank.sharma@xxxxxxx> - Shashank _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel