Hi Tomi,
Thank you for the patch.
On Tue, Dec 08, 2020 at 02:28:38PM +0200, Tomi Valkeinen wrote:
> DSI virtual channel and hardware VC blocks have gotten tangled as
> described in the previous commits. This has not caused any issues, as
> the value for both is 0, so it happens to work.
>
> To fix the issue, change the code to use the correct one of the two.
>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
> ---
> drivers/gpu/drm/omapdrm/dss/dsi.c | 43 +++++++++++++++----------------
> 1 file changed, 21 insertions(+), 22 deletions(-)
>
> diff --git a/drivers/gpu/drm/omapdrm/dss/dsi.c b/drivers/gpu/drm/omapdrm/dss/dsi.c
> index 8d8412199693..a1f3623f45b1 100644
> --- a/drivers/gpu/drm/omapdrm/dss/dsi.c
> +++ b/drivers/gpu/drm/omapdrm/dss/dsi.c
> @@ -2613,7 +2613,7 @@ static inline void dsi_vc_write_long_header(struct dsi_data *dsi, int vc,
>
> WARN_ON(!dsi_bus_is_locked(dsi));
>
> - data_id = data_type | vc << 6;
> + data_id = data_type | channel << 6;
>
> val = FLD_VAL(data_id, 7, 0) | FLD_VAL(len, 23, 8) |
> FLD_VAL(ecc, 31, 24);
> @@ -2647,12 +2647,12 @@ static int dsi_vc_send_long(struct dsi_data *dsi, int vc,
> DSSDBG("dsi_vc_send_long, %d bytes\n", msg->tx_len);
>
> /* len + header */
> - if (dsi->vc[msg->channel].tx_fifo_size * 32 * 4 < msg->tx_len + 4) {
> + if (dsi->vc[vc].tx_fifo_size * 32 * 4 < msg->tx_len + 4) {
> DSSERR("unable to send long packet: packet too long.\n");
> return -EINVAL;
> }
>
> - dsi_vc_config_source(dsi, msg->channel, DSI_VC_SOURCE_L4);
> + dsi_vc_config_source(dsi, vc, DSI_VC_SOURCE_L4);
>
> dsi_vc_write_long_header(dsi, vc, msg->channel, msg->type, msg->tx_len, 0);
>
> @@ -2666,7 +2666,7 @@ static int dsi_vc_send_long(struct dsi_data *dsi, int vc,
> b3 = *p++;
> b4 = *p++;
>
> - dsi_vc_write_long_payload(dsi, msg->channel, b1, b2, b3, b4);
> + dsi_vc_write_long_payload(dsi, vc, b1, b2, b3, b4);
> }
>
> i = msg->tx_len % 4;
> @@ -2691,7 +2691,7 @@ static int dsi_vc_send_long(struct dsi_data *dsi, int vc,
> break;
> }
>
> - dsi_vc_write_long_payload(dsi, msg->channel, b1, b2, b3, 0);
> + dsi_vc_write_long_payload(dsi, vc, b1, b2, b3, 0);
> }
>
> return r;
> @@ -2711,11 +2711,11 @@ static int dsi_vc_send_short(struct dsi_data *dsi, int vc,
>
> if (dsi->debug_write)
> DSSDBG("dsi_vc_send_short(ch%d, dt %#x, b1 %#x, b2 %#x)\n",
> - msg->channel, msg->type, pkt.header[1], pkt.header[2]);
> + vc, msg->type, pkt.header[1], pkt.header[2]);
>
> - dsi_vc_config_source(dsi, msg->channel, DSI_VC_SOURCE_L4);
> + dsi_vc_config_source(dsi, vc, DSI_VC_SOURCE_L4);
>
> - if (FLD_GET(dsi_read_reg(dsi, DSI_VC_CTRL(msg->channel)), 16, 16)) {
> + if (FLD_GET(dsi_read_reg(dsi, DSI_VC_CTRL(vc)), 16, 16)) {
> DSSERR("ERROR FIFO FULL, aborting transfer\n");
> return -EINVAL;
> }
> @@ -2723,7 +2723,7 @@ static int dsi_vc_send_short(struct dsi_data *dsi, int vc,
> r = pkt.header[3] << 24 | pkt.header[2] << 16 | pkt.header[1] << 8 |
> pkt.header[0];
>
> - dsi_write_reg(dsi, DSI_VC_SHORT_PACKET_HEADER(msg->channel), r);
> + dsi_write_reg(dsi, DSI_VC_SHORT_PACKET_HEADER(vc), r);
>
> return 0;
> }
> @@ -2731,7 +2731,7 @@ static int dsi_vc_send_short(struct dsi_data *dsi, int vc,
> static int dsi_vc_send_null(struct dsi_data *dsi, int vc, int channel)
> {
> const struct mipi_dsi_msg msg = {
> - .channel = vc,
> + .channel = channel,
> .type = MIPI_DSI_NULL_PACKET,
> };
>
> @@ -2759,16 +2759,16 @@ static int dsi_vc_write_common(struct omap_dss_device *dssdev, int vc,
> * In that case we can return early.
> */
>
> - r = dsi_vc_send_bta_sync(dssdev, msg->channel);
> + r = dsi_vc_send_bta_sync(dssdev, vc);
> if (r) {
> DSSERR("bta sync failed\n");
> return r;
> }
>
> /* RX_FIFO_NOT_EMPTY */
> - if (REG_GET(dsi, DSI_VC_CTRL(msg->channel), 20, 20)) {
> + if (REG_GET(dsi, DSI_VC_CTRL(vc), 20, 20)) {
> DSSERR("rx fifo not empty after write, dumping data:\n");
> - dsi_vc_flush_receive_data(dsi, msg->channel);
> + dsi_vc_flush_receive_data(dsi, vc);
> return -EIO;
> }
>
> @@ -2888,21 +2888,20 @@ static int dsi_vc_dcs_read(struct omap_dss_device *dssdev, int vc,
> {
> struct dsi_data *dsi = to_dsi_data(dssdev);
> u8 cmd = ((u8 *)msg->tx_buf)[0];
> - u8 channel = msg->channel;
> int r;
>
> if (dsi->debug_read)
> - DSSDBG("%s(ch %d, cmd %x)\n", __func__, channel, cmd);
> + DSSDBG("%s(ch %d, cmd %x)\n", __func__, vc, cmd);
How about also renaming ch to vc in the message ?
>
> r = dsi_vc_send_short(dsi, vc, msg);
> if (r)
> goto err;
>
> - r = dsi_vc_send_bta_sync(dssdev, channel);
> + r = dsi_vc_send_bta_sync(dssdev, vc);
> if (r)
> goto err;
>
> - r = dsi_vc_read_rx_fifo(dsi, channel, msg->rx_buf, msg->rx_len,
> + r = dsi_vc_read_rx_fifo(dsi, vc, msg->rx_buf, msg->rx_len,
> DSS_DSI_CONTENT_DCS);
> if (r < 0)
> goto err;
> @@ -2914,7 +2913,7 @@ static int dsi_vc_dcs_read(struct omap_dss_device *dssdev, int vc,
>
> return 0;
> err:
> - DSSERR("%s(ch %d, cmd 0x%02x) failed\n", __func__, msg->channel, cmd);
> + DSSERR("%s(ch %d, cmd 0x%02x) failed\n", __func__, vc, cmd);
Same here.
> return r;
> }
>
> @@ -2928,11 +2927,11 @@ static int dsi_vc_generic_read(struct omap_dss_device *dssdev, int vc,
> if (r)
> goto err;
>
> - r = dsi_vc_send_bta_sync(dssdev, msg->channel);
> + r = dsi_vc_send_bta_sync(dssdev, vc);
> if (r)
> goto err;
>
> - r = dsi_vc_read_rx_fifo(dsi, msg->channel, msg->rx_buf, msg->rx_len,
> + r = dsi_vc_read_rx_fifo(dsi, vc, msg->rx_buf, msg->rx_len,
> DSS_DSI_CONTENT_GENERIC);
> if (r < 0)
> goto err;
> @@ -2944,7 +2943,7 @@ static int dsi_vc_generic_read(struct omap_dss_device *dssdev, int vc,
>
> return 0;
> err:
> - DSSERR("%s(ch %d, reqlen %d) failed\n", __func__, msg->channel, msg->tx_len);
> + DSSERR("%s(ch %d, reqlen %d) failed\n", __func__, vc, msg->tx_len);
And here.
Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> return r;
> }
>
> @@ -4893,7 +4892,7 @@ static ssize_t _omap_dsi_host_transfer(struct dsi_data *dsi, int vc,
> int r;
>
> if (!!(msg->flags & MIPI_DSI_MSG_USE_LPM) != dsi->in_lp_mode)
> - dsi_vc_enable_hs(dssdev, msg->channel,
> + dsi_vc_enable_hs(dssdev, vc,
> !(msg->flags & MIPI_DSI_MSG_USE_LPM));
>
> switch (msg->type) {
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
