Hi Stephen On Mon, Nov 02, 2020 at 10:11:40AM -0800, Stephen Boyd wrote: > This patch series cleans up the DDC code a little bit so that > it is more efficient time wise and supports grabbing the EDID > of the eDP panel over the aux channel. I timed this on a board > I have on my desk and it takes about 20ms to grab the EDID out > of the panel and make sure it is valid. > > The first two patches seem less controversial so I stuck them at > the beginning. The third patch does the EDID reading and caches > it so we don't have to keep grabbing it over and over again. And > finally the last patch updates the reply field so that short > reads and nacks over the channel are reflected properly instead of > treating them as some sort of error that can't be discerned. > > Stephen Boyd (4): > drm/bridge: ti-sn65dsi86: Combine register accesses in > ti_sn_aux_transfer() > drm/bridge: ti-sn65dsi86: Make polling a busy loop > drm/bridge: ti-sn65dsi86: Read EDID blob over DDC > drm/bridge: ti-sn65dsi86: Update reply on aux failures All applied to drm-misc-next, thanks, Sam _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
