It has been observed that resetting force in the detect function can result in the PHY being powered down in response to hot-plug detect being asserted, even when the HDMI connector is forced on. Enabling debug messages and adding a call to dump_stack() in dw_hdmi_phy_power_off() shows the following in dmesg: [ 160.637413] dwhdmi-rockchip ff940000.hdmi: EVENT=plugin [ 160.637433] dwhdmi-rockchip ff940000.hdmi: PHY powered down in 0 iterations Call trace: dw_hdmi_phy_power_off dw_hdmi_phy_disable dw_hdmi_update_power dw_hdmi_detect dw_hdmi_connector_detect drm_helper_probe_detect_ctx drm_helper_hpd_irq_event dw_hdmi_irq irq_thread_fn irq_thread kthread ret_from_fork Fixes: 381f05a7a842 ("drm: bridge/dw_hdmi: add connector mode forcing") Signed-off-by: Jonathan Liu <net147@xxxxxxxxx> --- drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c index 748df1cacd2b..0c79a9ba48bb 100644 --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c @@ -2327,12 +2327,6 @@ static enum drm_connector_status dw_hdmi_detect(struct dw_hdmi *hdmi) { enum drm_connector_status result; - mutex_lock(&hdmi->mutex); - hdmi->force = DRM_FORCE_UNSPECIFIED; - dw_hdmi_update_power(hdmi); - dw_hdmi_update_phy_mask(hdmi); - mutex_unlock(&hdmi->mutex); - result = hdmi->phy.ops->read_hpd(hdmi, hdmi->phy.data); mutex_lock(&hdmi->mutex); -- 2.29.1 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel