https://bugzilla.kernel.org/show_bug.cgi?id=47471 Summary: Radeon - NMI: PCI system error (SERR) for reason a1 on CPU 0. Product: Drivers Version: 2.5 Kernel Version: 3.4.9, 3.5.3 Platform: All OS/Version: Linux Tree: Mainline Status: NEW Severity: normal Priority: P1 Component: Video(DRI - non Intel) AssignedTo: drivers_video-dri@xxxxxxxxxxxxxxxxxxxx ReportedBy: binarycode.11@xxxxxxxxx Regression: No Created an attachment (id=80091) --> (https://bugzilla.kernel.org/attachment.cgi?id=80091) dmesg - kernel 3.2.28 Distribution: slackware -current kernel version: 3.2.28-smp Hardware Environment: Dell Inspiron 6400 - video card: Ati X1400 Hi! On my Slackware -current whenever I try to change my ati x1400 power profile (by echoing the "/sys/class/drm/card0/device/power_profile" file) I always get the following NMI alert: NMI: PCI system error (SERR) for reason a1 on CPU 0. Dazed and confused, but trying to continue (It's sometimes reported the reason "b1" instead of the "a1") There is no report about the NMI error message, during the system boot. At the startup my system defaults the video card power profile to its "default" state, so that my system startup scenar is the following: --- root@darkstar:~# cat /sys/class/drm/card0/device/power_method profile root@darkstar:~# cat /sys/class/drm/card0/device/power_profile default root@darkstar:~# cat /sys/kernel/debug/dri/0/radeon_pm_info default engine clock: 432000 kHz current engine clock: 432000 kHz default memory clock: 396000 kHz current memory clock: 396000 kHz PCIE lanes: 0 --- Everytime I change the video card clock frequency, by switching to another power profile, I get the NMI alert: --- root@darkstar:~# echo low > /sys/class/drm/card0/device/power_profile NMI: PCI system error (SERR) for reason a1 on CPU 0. Dazed and confused, but trying to continue ... root@darkstar:~# cat /sys/kernel/debug/dri/0/radeon_pm_info default engine clock: 432000 kHz current engine clock: 324000 kHz default memory clock: 396000 kHz current memory clock: 135000 kHz PCIE lanes: 1 --- The NMI alert still occurres with KMS disabled (booting with the "nomodeset" kernel option). With KMS disabled, I tried to reduce the power by adding the following three lines to the "Device Section" of a new "xorg.conf": Option "DynamicPM" "on" Option "ClockGating" "on" Option "ForceLowPowerMode" "on" But, as soon as I startX I receive the NMI alert! I could notice this issue running other kernel versions up to the 3.2.28 (specifically: 3.2.23, 3.2.26, 3.2.27, 3.2.28) I tried upgrading to the slackware kernel vanilla version 3.4.9-smp (now in testing). I could notice a slightly different behaviour compared to the 3.2.x kernels: Changing the power profile doesnt't produce anymore the NMI error message output but, the NMI error message always occures during the bootup of the system! (I've attached the dmesg-kernel_3.4.9, too.) Same situation running gentoo live 12.1 (kernel 3.3.0) and knoppix live 7.0.4 (kernel 3.4.9). Despite the NMI alerts the system works well, but I'm worried about the possibility that the NMI signal is warning about (or could lead to...) video card failure. -- Configure bugmail: https://bugzilla.kernel.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are watching the assignee of the bug. _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel
