[PATCH v3 1/3] drm/bridge: sii902x: Refactor init code into separate function

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Separate the hardware initialization code from setting up the data
structures and parsing the device tree. The purpose of this change is
to provide a single exit point and avoid a waterfall of 'goto's in
the subsequent patch.

Signed-off-by: Alexandru Gagniuc <mr.nuke.me@xxxxxxxxx>
---
Changes since v1/and v2:
  * Separated this from main patch to better show diff

 drivers/gpu/drm/bridge/sii902x.c | 77 ++++++++++++++++++--------------
 1 file changed, 43 insertions(+), 34 deletions(-)

diff --git a/drivers/gpu/drm/bridge/sii902x.c b/drivers/gpu/drm/bridge/sii902x.c
index 33fd33f953ec..f78c17f49887 100644
--- a/drivers/gpu/drm/bridge/sii902x.c
+++ b/drivers/gpu/drm/bridge/sii902x.c
@@ -954,41 +954,13 @@ static const struct drm_bridge_timings default_sii902x_timings = {
 		 | DRM_BUS_FLAG_DE_HIGH,
 };
 
-static int sii902x_probe(struct i2c_client *client,
-			 const struct i2c_device_id *id)
+static int sii902x_init(struct sii902x *sii902x)
 {
-	struct device *dev = &client->dev;
+	struct device *dev = &sii902x->i2c->dev;
 	unsigned int status = 0;
-	struct sii902x *sii902x;
 	u8 chipid[4];
 	int ret;
 
-	ret = i2c_check_functionality(client->adapter,
-				      I2C_FUNC_SMBUS_BYTE_DATA);
-	if (!ret) {
-		dev_err(dev, "I2C adapter not suitable\n");
-		return -EIO;
-	}
-
-	sii902x = devm_kzalloc(dev, sizeof(*sii902x), GFP_KERNEL);
-	if (!sii902x)
-		return -ENOMEM;
-
-	sii902x->i2c = client;
-	sii902x->regmap = devm_regmap_init_i2c(client, &sii902x_regmap_config);
-	if (IS_ERR(sii902x->regmap))
-		return PTR_ERR(sii902x->regmap);
-
-	sii902x->reset_gpio = devm_gpiod_get_optional(dev, "reset",
-						      GPIOD_OUT_LOW);
-	if (IS_ERR(sii902x->reset_gpio)) {
-		dev_err(dev, "Failed to retrieve/request reset gpio: %ld\n",
-			PTR_ERR(sii902x->reset_gpio));
-		return PTR_ERR(sii902x->reset_gpio);
-	}
-
-	mutex_init(&sii902x->mutex);
-
 	sii902x_reset(sii902x);
 
 	ret = regmap_write(sii902x->regmap, SII902X_REG_TPI_RQB, 0x0);
@@ -1012,11 +984,11 @@ static int sii902x_probe(struct i2c_client *client,
 	regmap_read(sii902x->regmap, SII902X_INT_STATUS, &status);
 	regmap_write(sii902x->regmap, SII902X_INT_STATUS, status);
 
-	if (client->irq > 0) {
+	if (sii902x->i2c->irq > 0) {
 		regmap_write(sii902x->regmap, SII902X_INT_ENABLE,
 			     SII902X_HOTPLUG_EVENT);
 
-		ret = devm_request_threaded_irq(dev, client->irq, NULL,
+		ret = devm_request_threaded_irq(dev, sii902x->i2c->irq, NULL,
 						sii902x_interrupt,
 						IRQF_ONESHOT, dev_name(dev),
 						sii902x);
@@ -1031,9 +1003,9 @@ static int sii902x_probe(struct i2c_client *client,
 
 	sii902x_audio_codec_init(sii902x, dev);
 
-	i2c_set_clientdata(client, sii902x);
+	i2c_set_clientdata(sii902x->i2c, sii902x);
 
-	sii902x->i2cmux = i2c_mux_alloc(client->adapter, dev,
+	sii902x->i2cmux = i2c_mux_alloc(sii902x->i2c->adapter, dev,
 					1, 0, I2C_MUX_GATE,
 					sii902x_i2c_bypass_select,
 					sii902x_i2c_bypass_deselect);
@@ -1044,6 +1016,43 @@ static int sii902x_probe(struct i2c_client *client,
 	return i2c_mux_add_adapter(sii902x->i2cmux, 0, 0, 0);
 }
 
+static int sii902x_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	struct sii902x *sii902x;
+	int ret;
+
+	ret = i2c_check_functionality(client->adapter,
+				      I2C_FUNC_SMBUS_BYTE_DATA);
+	if (!ret) {
+		dev_err(dev, "I2C adapter not suitable\n");
+		return -EIO;
+	}
+
+	sii902x = devm_kzalloc(dev, sizeof(*sii902x), GFP_KERNEL);
+	if (!sii902x)
+		return -ENOMEM;
+
+	sii902x->i2c = client;
+	sii902x->regmap = devm_regmap_init_i2c(client, &sii902x_regmap_config);
+	if (IS_ERR(sii902x->regmap))
+		return PTR_ERR(sii902x->regmap);
+
+	sii902x->reset_gpio = devm_gpiod_get_optional(dev, "reset",
+						      GPIOD_OUT_LOW);
+	if (IS_ERR(sii902x->reset_gpio)) {
+		dev_err(dev, "Failed to retrieve/request reset gpio: %ld\n",
+			PTR_ERR(sii902x->reset_gpio));
+		return PTR_ERR(sii902x->reset_gpio);
+	}
+
+	mutex_init(&sii902x->mutex);
+
+	ret = sii902x_init(sii902x);
+	return ret;
+}
+
 static int sii902x_remove(struct i2c_client *client)
 
 {
-- 
2.26.2

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux