Re: [PATCH v2 1/2] drm/bridge: sii902x: Enable I/O and core VCC supplies if present

["Alex G." <mr.nuke.me@xxxxxxxxx>]

On 10/20/20 2:16 AM, Sam Ravnborg wrote:
> Hi Alex.

[snip]

> > > diff --git a/drivers/gpu/drm/bridge/sii902x.c b/drivers/gpu/drm/bridge/sii902x.c
> > > index 33fd33f953ec..d15e9f2c0d8a 100644
> > > --- a/drivers/gpu/drm/bridge/sii902x.c
> > > +++ b/drivers/gpu/drm/bridge/sii902x.c
> > > @@ -17,6 +17,7 @@
> > >    #include <linux/i2c.h>
> > >    #include <linux/module.h>
> > >    #include <linux/regmap.h>
> > > +#include <linux/regulator/consumer.h>
> > >    #include <linux/clk.h>
> > >    #include <drm/drm_atomic_helper.h>
> > > @@ -168,6 +169,8 @@ struct sii902x {
> > >    	struct drm_connector connector;
> > >    	struct gpio_desc *reset_gpio;
> > >    	struct i2c_mux_core *i2cmux;
> > > +	struct regulator *iovcc;
> > > +	struct regulator *cvcc12;
> > >    	/*
> > >    	 * Mutex protects audio and video functions from interfering
> > >    	 * each other, by keeping their i2c command sequences atomic.
> > > @@ -954,13 +957,13 @@ static const struct drm_bridge_timings default_sii902x_timings = {
> > >    		 | DRM_BUS_FLAG_DE_HIGH,
> > >    };
> > > +static int sii902x_init(struct sii902x *sii902x);
> Please re-arrange the code so this prototype is not needed.

I'd be happy to re-arrange things. It will make the diff look a lot 
bigger than what it is. Is that okay?

Alex

> > > +
> > >    static int sii902x_probe(struct i2c_client *client,
> > >    			 const struct i2c_device_id *id)
> > >    {
> > >    	struct device *dev = &client->dev;
> > > -	unsigned int status = 0;
> > >    	struct sii902x *sii902x;
> > > -	u8 chipid[4];
> > >    	int ret;
> > >    	ret = i2c_check_functionality(client->adapter,
> > > @@ -989,6 +992,43 @@ static int sii902x_probe(struct i2c_client *client,
> > >    	mutex_init(&sii902x->mutex);
> > > +	sii902x->iovcc = devm_regulator_get(dev, "iovcc");
> > > +	if (IS_ERR(sii902x->iovcc))
> > > +		return PTR_ERR(sii902x->iovcc);
> > > +
> > > +	sii902x->cvcc12 = devm_regulator_get(dev, "cvcc12");
> > > +	if (IS_ERR(sii902x->cvcc12))
> > > +		return PTR_ERR(sii902x->cvcc12);
> > > +
> > > +	ret = regulator_enable(sii902x->iovcc);
> > > +	if (ret < 0) {
> > > +		dev_err_probe(dev, ret, "Failed to enable iovcc supply");
> > > +		return ret;
> > > +	}
> > > +
> > > +	ret = regulator_enable(sii902x->cvcc12);
> > > +	if (ret < 0) {
> > > +		dev_err_probe(dev, ret, "Failed to enable cvcc12 supply");
> > > +		regulator_disable(sii902x->iovcc);
> > > +		return ret;
> > > +	}
> > > +
> > > +	ret = sii902x_init(sii902x);
> > > +	if (ret < 0) {
> > > +		regulator_disable(sii902x->cvcc12);
> > > +		regulator_disable(sii902x->iovcc);
> > > +	}
> > > +
> > > +	return ret;
> > > +}
> > > +
> > > +static int sii902x_init(struct sii902x *sii902x)
> > > +{
> > > +	struct device *dev = &sii902x->i2c->dev;
> > > +	unsigned int status = 0;
> > > +	u8 chipid[4];
> > > +	int ret;
> > > +
> > >    	sii902x_reset(sii902x);
> > >    	ret = regmap_write(sii902x->regmap, SII902X_REG_TPI_RQB, 0x0);
> > > @@ -1012,11 +1052,11 @@ static int sii902x_probe(struct i2c_client *client,
> > >    	regmap_read(sii902x->regmap, SII902X_INT_STATUS, &status);
> > >    	regmap_write(sii902x->regmap, SII902X_INT_STATUS, status);
> > > -	if (client->irq > 0) {
> > > +	if (sii902x->i2c->irq > 0) {
> > >    		regmap_write(sii902x->regmap, SII902X_INT_ENABLE,
> > >    			     SII902X_HOTPLUG_EVENT);
> > > -		ret = devm_request_threaded_irq(dev, client->irq, NULL,
> > > +		ret = devm_request_threaded_irq(dev, sii902x->i2c->irq, NULL,
> > >    						sii902x_interrupt,
> > >    						IRQF_ONESHOT, dev_name(dev),
> > >    						sii902x);
> > > @@ -1031,9 +1071,9 @@ static int sii902x_probe(struct i2c_client *client,
> > >    	sii902x_audio_codec_init(sii902x, dev);
> > > -	i2c_set_clientdata(client, sii902x);
> > > +	i2c_set_clientdata(sii902x->i2c, sii902x);
> > > -	sii902x->i2cmux = i2c_mux_alloc(client->adapter, dev,
> > > +	sii902x->i2cmux = i2c_mux_alloc(sii902x->i2c->adapter, dev,
> > >    					1, 0, I2C_MUX_GATE,
> > >    					sii902x_i2c_bypass_select,
> > >    					sii902x_i2c_bypass_deselect);
> > > @@ -1051,6 +1091,8 @@ static int sii902x_remove(struct i2c_client *client)
> > >    	i2c_mux_del_adapters(sii902x->i2cmux);
> > >    	drm_bridge_remove(&sii902x->bridge);
> > > +	regulator_disable(sii902x->cvcc12);
> > > +	regulator_disable(sii902x->iovcc);
> > >    	return 0;
> > >    }
> > _______________________________________________
> > dri-devel mailing list
> > dri-devel@xxxxxxxxxxxxxxxxxxxxx
> > https://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel