Re: [PATCH 0/5] drm/tidss: Use new connector model for tidss

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Nikhil,

On 16/10/2020 13:39, Nikhil Devshatwar wrote:
> This series moves the tidss to using new connectoe model, where the 
> SoC driver (tidss) creates the connector and all the bridges are 
> attached with the flag DRM_BRIDGE_ATTACH_NO_CONNECTOR
> 
> Since the bridges do not create the connector, the bus format and
> bus_flag is set after the format negotiation.
> Support format negotiations in the tfp410 and mhdp bridge drivers.
> 
> Nikhil Devshatwar (5):
>   drm/tidss: Move to newer connector model
>   drm/tidss: Set bus_format correctly from bridge/connector
>   drm: bridge: Propagate the bus flags from bridge->timings
>   drm/bridge: tfp410: Support format negotiation
>   drm/bridge: mhdp8564: Support format negotiation

I think the patch order could be a bit different. If you first change the tidss to use the new
connector model, and only afterwards fix the bridges we use, then there's a time when the displays
won't work.

Also, with J7 EVM and DP, when I unload the modules I see:

[   43.238895] irq 31: nobody cared (try booting with the "irqpoll" option)
[   43.245591] CPU: 0 PID: 349 Comm: irq/31-mhdp8546 Not tainted 5.9.0-rc5-00605-g08a291316f86 #4
[   43.254186] Hardware name: Texas Instruments K3 J721E SoC (DT)
[   43.260006] Call trace:
[   43.262453]  dump_backtrace+0x0/0x1d8
[   43.266107]  show_stack+0x18/0x28
[   43.269416]  dump_stack+0xe0/0x14c
[   43.272810]  __report_bad_irq+0x4c/0xdc
[   43.276637]  note_interrupt+0x2cc/0x388
[   43.280465]  handle_irq_event_percpu+0x88/0x90
[   43.284898]  handle_irq_event+0x48/0xf8
[   43.288725]  handle_fasteoi_irq+0xcc/0x180
[   43.292811]  generic_handle_irq+0x30/0x48
[   43.296811]  __handle_domain_irq+0x94/0x108
[   43.300986]  gic_handle_irq+0x60/0x158
[   43.304726]  el1_irq+0xbc/0x180
[   43.307862]  _raw_spin_unlock_irq+0x48/0x90
[   43.312035]  irq_finalize_oneshot.part.0+0x68/0x108
[   43.316903]  irq_thread_fn+0x60/0xa0
[   43.320469]  irq_thread+0x1b8/0x248
[   43.323949]  kthread+0x128/0x160
[   43.327169]  ret_from_fork+0x10/0x34
[   43.330735] handlers:
[   43.333020] [<000000005367c4f9>] irq_default_primary_handler threaded [<000000007e02b601>]
cdns_mhdp_irq_handler [cdns_mhdp8546]
[   43.344607] Disabling IRQ #31

 Tomi

-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux