On Thu, Oct 15, 2020 at 03:02:58PM -0700, Jianxin Xiong wrote:
> Implement the new driver method 'reg_user_mr_dmabuf'. Utilize the core
> functions to import dma-buf based memory region and update the mappings.
>
> Add code to handle dma-buf related page fault.
>
> Signed-off-by: Jianxin Xiong <jianxin.xiong@xxxxxxxxx>
> Reviewed-by: Sean Hefty <sean.hefty@xxxxxxxxx>
> Acked-by: Michael J. Ruhl <michael.j.ruhl@xxxxxxxxx>
> Acked-by: Christian Koenig <christian.koenig@xxxxxxx>
> Acked-by: Daniel Vetter <daniel.vetter@xxxxxxxx>
> drivers/infiniband/hw/mlx5/main.c | 2 +
> drivers/infiniband/hw/mlx5/mlx5_ib.h | 5 ++
> drivers/infiniband/hw/mlx5/mr.c | 119 +++++++++++++++++++++++++++++++++++
> drivers/infiniband/hw/mlx5/odp.c | 42 +++++++++++++
> 4 files changed, 168 insertions(+)
>
> diff --git a/drivers/infiniband/hw/mlx5/main.c b/drivers/infiniband/hw/mlx5/main.c
> index 89e04ca..ec4ad2f 100644
> +++ b/drivers/infiniband/hw/mlx5/main.c
> @@ -1,6 +1,7 @@
> // SPDX-License-Identifier: GPL-2.0 OR Linux-OpenIB
> /*
> * Copyright (c) 2013-2020, Mellanox Technologies inc. All rights reserved.
> + * Copyright (c) 2020, Intel Corporation. All rights reserved.
> */
>
> #include <linux/debugfs.h>
> @@ -4060,6 +4061,7 @@ static int mlx5_ib_enable_driver(struct ib_device *dev)
> .query_srq = mlx5_ib_query_srq,
> .query_ucontext = mlx5_ib_query_ucontext,
> .reg_user_mr = mlx5_ib_reg_user_mr,
> + .reg_user_mr_dmabuf = mlx5_ib_reg_user_mr_dmabuf,
> .req_notify_cq = mlx5_ib_arm_cq,
> .rereg_user_mr = mlx5_ib_rereg_user_mr,
> .resize_cq = mlx5_ib_resize_cq,
> diff --git a/drivers/infiniband/hw/mlx5/mlx5_ib.h b/drivers/infiniband/hw/mlx5/mlx5_ib.h
> index b1f2b34..65fcc18 100644
> +++ b/drivers/infiniband/hw/mlx5/mlx5_ib.h
> @@ -1,6 +1,7 @@
> /* SPDX-License-Identifier: GPL-2.0 OR Linux-OpenIB */
> /*
> * Copyright (c) 2013-2020, Mellanox Technologies inc. All rights reserved.
> + * Copyright (c) 2020, Intel Corporation. All rights reserved.
> */
>
> #ifndef MLX5_IB_H
> @@ -1174,6 +1175,10 @@ int mlx5_ib_create_cq(struct ib_cq *ibcq, const struct ib_cq_init_attr *attr,
> struct ib_mr *mlx5_ib_reg_user_mr(struct ib_pd *pd, u64 start, u64 length,
> u64 virt_addr, int access_flags,
> struct ib_udata *udata);
> +struct ib_mr *mlx5_ib_reg_user_mr_dmabuf(struct ib_pd *pd, u64 start,
> + u64 length, u64 virt_addr,
> + int dmabuf_fd, int access_flags,
> + struct ib_udata *udata);
> int mlx5_ib_advise_mr(struct ib_pd *pd,
> enum ib_uverbs_advise_mr_advice advice,
> u32 flags,
> diff --git a/drivers/infiniband/hw/mlx5/mr.c b/drivers/infiniband/hw/mlx5/mr.c
> index b261797..24750f1 100644
> +++ b/drivers/infiniband/hw/mlx5/mr.c
> @@ -1,5 +1,6 @@
> /*
> * Copyright (c) 2013-2015, Mellanox Technologies. All rights reserved.
> + * Copyright (c) 2020, Intel Corporation. All rights reserved.
> *
> * This software is available to you under a choice of one of two
> * licenses. You may choose to be licensed under the terms of the GNU
> @@ -1462,6 +1463,124 @@ struct ib_mr *mlx5_ib_reg_user_mr(struct ib_pd *pd, u64 start, u64 length,
> return ERR_PTR(err);
> }
>
> +static int mlx5_ib_umem_dmabuf_xlt_init(struct ib_umem *umem, void *context)
> +{
> + struct mlx5_ib_mr *mr = context;
> + int flags = MLX5_IB_UPD_XLT_ENABLE;
> +
> + if (!mr)
> + return -EINVAL;
> +
> + return mlx5_ib_update_xlt(mr, 0, mr->npages, PAGE_SHIFT, flags);
> +}
> +static int mlx5_ib_umem_dmabuf_xlt_update(struct ib_umem *umem, void *context)
> +{
> + struct mlx5_ib_mr *mr = context;
> + int flags = MLX5_IB_UPD_XLT_ATOMIC;
Why are these atomic? Why the strange coding style of declaring a
variable?
> + if (!mr)
> + return -EINVAL;
Why can this happen? Will dma_buf call move_notify prior to
dma_buf_map_attachment? There are locking problems if that happens.
> + return mlx5_ib_update_xlt(mr, 0, mr->npages, PAGE_SHIFT, flags);
> +}
> +
> +static int mlx5_ib_umem_dmabuf_xlt_invalidate(struct ib_umem *umem, void *context)
> +{
> + struct mlx5_ib_mr *mr = context;
> + int flags = MLX5_IB_UPD_XLT_ZAP | MLX5_IB_UPD_XLT_ATOMIC;
> +
> + if (!mr)
> + return -EINVAL;
> +
> + return mlx5_ib_update_xlt(mr, 0, mr->npages, PAGE_SHIFT, flags);
> +}
> +
> +static struct ib_umem_dmabuf_ops mlx5_ib_umem_dmabuf_ops = {
> + .init = mlx5_ib_umem_dmabuf_xlt_init,
> + .update = mlx5_ib_umem_dmabuf_xlt_update,
> + .invalidate = mlx5_ib_umem_dmabuf_xlt_invalidate,
> +};
I'm not really convinced these should be ops, this is usually a bad
design pattern.
Why do I need so much code to extract the sgl from the dma_buf? I
would prefer the dma_buf layer simplify this, not by adding a wrapper
around it in the IB core code...
> +struct ib_mr *mlx5_ib_reg_user_mr_dmabuf(struct ib_pd *pd, u64 start,
> + u64 length, u64 virt_addr,
> + int dmabuf_fd, int access_flags,
> + struct ib_udata *udata)
> +{
> + struct mlx5_ib_dev *dev = to_mdev(pd->device);
> + struct mlx5_ib_mr *mr = NULL;
> + struct ib_umem *umem;
> + int page_shift;
> + int npages;
> + int ncont;
> + int order;
> + int err;
> +
> + if (!IS_ENABLED(CONFIG_INFINIBAND_USER_MEM))
> + return ERR_PTR(-EOPNOTSUPP);
> +
> + mlx5_ib_dbg(dev,
> + "start 0x%llx, virt_addr 0x%llx, length 0x%llx, fd %d, access_flags 0x%x\n",
> + start, virt_addr, length, dmabuf_fd, access_flags);
> +
> + if (!mlx5_ib_can_load_pas_with_umr(dev, length))
> + return ERR_PTR(-EINVAL);
> +
> + umem = ib_umem_dmabuf_get(&dev->ib_dev, start, length, dmabuf_fd,
> + access_flags, &mlx5_ib_umem_dmabuf_ops);
> + if (IS_ERR(umem)) {
> + mlx5_ib_dbg(dev, "umem get failed (%ld)\n", PTR_ERR(umem));
> + return ERR_PTR(PTR_ERR(umem));
> + }
> +
> + npages = ib_umem_num_pages(umem);
> + if (!npages) {
> + mlx5_ib_warn(dev, "avoid zero region\n");
> + ib_umem_release(umem);
> + return ERR_PTR(-EINVAL);
> + }
> +
> + page_shift = PAGE_SHIFT;
> + ncont = npages;
> + order = ilog2(roundup_pow_of_two(ncont));
We still need to deal with contiguity here, this ncont/npages is just
obfuscation.
I have a patch series that should get posted soon rewriting all of
this stuff..
> + mlx5_ib_dbg(dev, "npages %d, ncont %d, order %d, page_shift %d\n",
> + npages, ncont, order, page_shift);
> +
> + mr = alloc_mr_from_cache(pd, umem, virt_addr, length, ncont,
> + page_shift, order, access_flags);
> + if (IS_ERR(mr))
> + mr = NULL;
> +
> + if (!mr) {
> + mutex_lock(&dev->slow_path_mutex);
> + mr = reg_create(NULL, pd, virt_addr, length, umem, ncont,
> + page_shift, access_flags, false);
> + mutex_unlock(&dev->slow_path_mutex);
> + }
> +
> + if (IS_ERR(mr)) {
> + err = PTR_ERR(mr);
> + goto error;
> + }
> +
> + mlx5_ib_dbg(dev, "mkey 0x%x\n", mr->mmkey.key);
> +
> + mr->umem = umem;
> + set_mr_fields(dev, mr, npages, length, access_flags);
After another series I have there will be three copies of this
sequence :\
> + err = ib_umem_dmabuf_init_mapping(umem, mr);
> + if (err) {
> + dereg_mr(dev, mr);
> + return ERR_PTR(err);
> + }
Did you test the page fault path at all? Looks like some xarray code
is missing here, and this is also missing the related complex teardown
logic.
Does this mean you didn't test the pagefault_dmabuf_mr() at all?
Jason
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
