On Wed, Sep 16, 2020 at 10:19 AM Lyude Paul <lyude@xxxxxxxxxx> wrote:
>
> Since we're about to start adding support for Intel's magic HDR
> backlight interface over DPCD, we need to ensure we're properly
> programming this field so that Intel specific sink services are exposed.
> Otherwise, 0x300-0x3ff will just read zeroes.
>
> We also take care not to reprogram the source OUI if it already matches
> what we expect. This is just to be careful so that we don't accidentally
> take the panel out of any backlight control modes we found it in.
>
> v2:
> * Add careful parameter to intel_edp_init_source_oui() to avoid
> re-writing the source OUI if it's already been set during driver
> initialization
>
> Signed-off-by: Lyude Paul <lyude@xxxxxxxxxx>
> Cc: thaytan@xxxxxxxxxxxx
> Cc: Vasily Khoruzhick <anarsoul@xxxxxxxxx>
Hi Lyude,
Sorry for a late reply.
Whole series is:
Tested-by: Vasily Khoruzhick <anarsoul@xxxxxxxxx>
Regards,
Vasily
> ---
> drivers/gpu/drm/i915/display/intel_dp.c | 33 +++++++++++++++++++++++++
> 1 file changed, 33 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> index 4bd10456ad188..7db2b6a3cd52e 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -3424,6 +3424,29 @@ void intel_dp_sink_set_decompression_state(struct intel_dp *intel_dp,
> enable ? "enable" : "disable");
> }
>
> +static void
> +intel_edp_init_source_oui(struct intel_dp *intel_dp, bool careful)
> +{
> + struct drm_i915_private *i915 = dp_to_i915(intel_dp);
> + u8 oui[] = { 0x00, 0xaa, 0x01 };
> + u8 buf[3] = { 0 };
> +
> + /*
> + * During driver init, we want to be careful and avoid changing the source OUI if it's
> + * already set to what we want, so as to avoid clearing any state by accident
> + */
> + if (careful) {
> + if (drm_dp_dpcd_read(&intel_dp->aux, DP_SOURCE_OUI, buf, sizeof(buf)) < 0)
> + drm_err(&i915->drm, "Failed to read source OUI\n");
> +
> + if (memcmp(oui, buf, sizeof(oui)) == 0)
> + return;
> + }
> +
> + if (drm_dp_dpcd_write(&intel_dp->aux, DP_SOURCE_OUI, oui, sizeof(oui)) < 0)
> + drm_err(&i915->drm, "Failed to write source OUI\n");
> +}
> +
> /* If the sink supports it, try to set the power state appropriately */
> void intel_dp_sink_dpms(struct intel_dp *intel_dp, int mode)
> {
> @@ -3443,6 +3466,10 @@ void intel_dp_sink_dpms(struct intel_dp *intel_dp, int mode)
> } else {
> struct intel_lspcon *lspcon = dp_to_lspcon(intel_dp);
>
> + /* Write the source OUI as early as possible */
> + if (intel_dp_is_edp(intel_dp))
> + intel_edp_init_source_oui(intel_dp, false);
> +
> /*
> * When turning on, we need to retry for 1ms to give the sink
> * time to wake up.
> @@ -4607,6 +4634,12 @@ intel_edp_init_dpcd(struct intel_dp *intel_dp)
> if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv))
> intel_dp_get_dsc_sink_cap(intel_dp);
>
> + /*
> + * If needed, program our source OUI so we can make various Intel-specific AUX services
> + * available (such as HDR backlight controls)
> + */
> + intel_edp_init_source_oui(intel_dp, true);
> +
> return true;
> }
>
> --
> 2.26.2
>
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
