When there is a chain of bridges attached to the encoder, the bus_format should be ideally set from the input format of the first bridge in the chain. Use the bridge state to get the negotiated bus_format. If the bridge does not support format negotiation, error out and fail. Signed-off-by: Nikhil Devshatwar <nikhil.nd@xxxxxx> --- drivers/gpu/drm/tidss/tidss_encoder.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/tidss/tidss_encoder.c b/drivers/gpu/drm/tidss/tidss_encoder.c index e278a9c89476..ae7f134754b7 100644 --- a/drivers/gpu/drm/tidss/tidss_encoder.c +++ b/drivers/gpu/drm/tidss/tidss_encoder.c @@ -22,6 +22,7 @@ static int tidss_encoder_atomic_check(struct drm_encoder *encoder, struct drm_device *ddev = encoder->dev; struct tidss_crtc_state *tcrtc_state = to_tidss_crtc_state(crtc_state); struct drm_display_info *di = &conn_state->connector->display_info; + struct drm_bridge_state *bstate; struct drm_bridge *bridge; bool bus_flags_set = false; @@ -41,14 +42,19 @@ static int tidss_encoder_atomic_check(struct drm_encoder *encoder, break; } - if (!di->bus_formats || di->num_bus_formats == 0) { - dev_err(ddev->dev, "%s: No bus_formats in connected display\n", - __func__); + /* Copy the bus_format from the input_bus_format of first bridge */ + bridge = drm_bridge_chain_get_first_bridge(encoder); + bstate = drm_atomic_get_new_bridge_state(crtc_state->state, bridge); + if (bstate) + tcrtc_state->bus_format = bstate->input_bus_cfg.format; + + if (tcrtc_state->bus_format == 0 || + tcrtc_state->bus_format == MEDIA_BUS_FMT_FIXED) { + + dev_err(ddev->dev, "Bridge connected to the encoder did not specify media bus format\n"); return -EINVAL; } - // XXX any cleaner way to set bus format and flags? - tcrtc_state->bus_format = di->bus_formats[0]; if (!bus_flags_set) tcrtc_state->bus_flags = di->bus_flags; -- 2.17.1 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel