Quoting Kuogee Hsieh (2020-09-29 10:10:26)
> Set link rate by using OPP set rate api so that CX level will be set
> accordingly base on the link rate.
s/base/based/
>
> Signed-off-by: Kuogee Hsieh <khsieh@xxxxxxxxxxxxxx>
> ---
> diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.c b/drivers/gpu/drm/msm/dp/dp_ctrl.c
> index 2e3e1917351f..e1595d829e04 100644
> --- a/drivers/gpu/drm/msm/dp/dp_ctrl.c
> +++ b/drivers/gpu/drm/msm/dp/dp_ctrl.c
> @@ -1849,6 +1853,21 @@ struct dp_ctrl *dp_ctrl_get(struct device *dev, struct dp_link *link,
> return ERR_PTR(-ENOMEM);
> }
>
> + ctrl->opp_table = dev_pm_opp_set_clkname(dev, "ctrl_link");
> +
> + if (IS_ERR(ctrl->opp_table)) {
> + dev_err(dev, "invalid DP OPP table in device tree\n");
> + ctrl->opp_table = NULL;
> + } else {
> + /* OPP table is optional */
> + ret = dev_pm_opp_of_add_table(dev);
> + if (ret && ret != -ENODEV) {
> + dev_err(dev, "add DP OPP table\n");
This is debug noise right?
> + dev_pm_opp_put_clkname(ctrl->opp_table);
> + ctrl->opp_table = NULL;
> + }
> + }
> +
> init_completion(&ctrl->idle_comp);
> init_completion(&ctrl->video_comp);
>
> @@ -1864,6 +1883,18 @@ struct dp_ctrl *dp_ctrl_get(struct device *dev, struct dp_link *link,
> return &ctrl->dp_ctrl;
> }
>
> -void dp_ctrl_put(struct dp_ctrl *dp_ctrl)
> +void dp_ctrl_put(struct device *dev, struct dp_ctrl *dp_ctrl)
> {
> + struct dp_ctrl_private *ctrl;
> +
> + if (!dp_ctrl)
Can this happen?
> + return;
> +
> + ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
> +
> + if (ctrl->opp_table != NULL) {
This is usually written as
if (ctrl->opp_table)
> + dev_pm_opp_of_remove_table(dev);
> + dev_pm_opp_put_clkname(ctrl->opp_table);
> + ctrl->opp_table = NULL;
> + }
> }
> diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.h b/drivers/gpu/drm/msm/dp/dp_ctrl.h
> index f60ba93c8678..19b412a93e02 100644
> --- a/drivers/gpu/drm/msm/dp/dp_ctrl.h
> +++ b/drivers/gpu/drm/msm/dp/dp_ctrl.h
> @@ -31,6 +31,6 @@ struct dp_ctrl *dp_ctrl_get(struct device *dev, struct dp_link *link,
> struct dp_panel *panel, struct drm_dp_aux *aux,
> struct dp_power *power, struct dp_catalog *catalog,
> struct dp_parser *parser);
> -void dp_ctrl_put(struct dp_ctrl *dp_ctrl);
> +void dp_ctrl_put(struct device *dev, struct dp_ctrl *dp_ctrl);
Is 'dev' not inside 'dp_ctrl'?
>
> #endif /* _DP_CTRL_H_ */
> diff --git a/drivers/gpu/drm/msm/dp/dp_power.c b/drivers/gpu/drm/msm/dp/dp_power.c
> index 17c1fc6a2d44..3d75bf09e38f 100644
> --- a/drivers/gpu/drm/msm/dp/dp_power.c
> +++ b/drivers/gpu/drm/msm/dp/dp_power.c
> @@ -8,12 +8,14 @@
> #include <linux/clk.h>
> #include <linux/clk-provider.h>
> #include <linux/regulator/consumer.h>
> +#include <linux/pm_opp.h>
> #include "dp_power.h"
> #include "msm_drv.h"
>
> struct dp_power_private {
> struct dp_parser *parser;
> struct platform_device *pdev;
> + struct device *dev;
> struct clk *link_clk_src;
> struct clk *pixel_provider;
> struct clk *link_provider;
> @@ -148,18 +150,49 @@ static int dp_power_clk_deinit(struct dp_power_private *power)
> return 0;
> }
>
> +static int dp_power_clk_set_link_rate(struct dp_power_private *power,
> + struct dss_clk *clk_arry, int num_clk, int enable)
> +{
> + u32 rate;
> + int i, rc = 0;
> +
> + for (i = 0; i < num_clk; i++) {
> + if (clk_arry[i].clk) {
> + if (clk_arry[i].type == DSS_CLK_PCLK) {
> + if (enable)
> + rate = clk_arry[i].rate;
> + else
> + rate = 0;
> +
> + rc = dev_pm_opp_set_rate(power->dev, rate);
Why do we keep going if rc is non-zero?
> + }
> +
> + }
> + }
> + return rc;
> +}
> +
> static int dp_power_clk_set_rate(struct dp_power_private *power,
> enum dp_pm_type module, bool enable)
> {
> int rc = 0;
> struct dss_module_power *mp = &power->parser->mp[module];
>
> - if (enable) {
> - rc = msm_dss_clk_set_rate(mp->clk_config, mp->num_clk);
> + if (module == DP_CTRL_PM) {
> + rc = dp_power_clk_set_link_rate(power, mp->clk_config, mp->num_clk, enable);
> if (rc) {
> - DRM_ERROR("failed to set clks rate.\n");
> + DRM_ERROR("failed to set link clks rate.\n");
> return rc;
> }
> + } else {
> +
> + if (enable) {
> + rc = msm_dss_clk_set_rate(mp->clk_config, mp->num_clk);
> + if (rc) {
> + DRM_ERROR("failed to set clks rate.\n");
Not sure we need the period on these error messages.
> + return rc;
> + }
> + }
> }
>
> rc = msm_dss_enable_clk(mp->clk_config, mp->num_clk, enable);
>
> base-commit: 3c0f462da069af12211901ddf26f7e16e6951d9b
> prerequisite-patch-id: a109eaf08147f50149ad661a58122b6745a52445
Can you rebase this on Rob's msm-next tree
(https://gitlab.freedesktop.org/drm/msm.git) and test? It doesn't apply
for me because I have the dp phy patch from there.
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
