The FIFO between the pixelvalve and the HDMI controller runs at 2 pixels per clock cycle, and cannot deal with odd timings. Let's reject any mode with such timings. Signed-off-by: Maxime Ripard <maxime@xxxxxxxxxx> --- drivers/gpu/drm/vc4/vc4_hdmi.c | 12 ++++++++++++ drivers/gpu/drm/vc4/vc4_hdmi.h | 3 +++ 2 files changed, 15 insertions(+) diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c index 1c4dc774d56e..acfb4e235214 100644 --- a/drivers/gpu/drm/vc4/vc4_hdmi.c +++ b/drivers/gpu/drm/vc4/vc4_hdmi.c @@ -879,6 +879,11 @@ static int vc4_hdmi_encoder_atomic_check(struct drm_encoder *encoder, struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder); unsigned long long pixel_rate = mode->clock * 1000; + if (vc4_hdmi->variant->broken_odd_h_timings && + ((mode->hdisplay % 2) || (mode->hsync_start % 2) || + (mode->hsync_end % 2) || (mode->htotal % 2))) + return -EINVAL; + if (mode->flags & DRM_MODE_FLAG_DBLCLK) pixel_rate *= 2; @@ -901,6 +906,11 @@ vc4_hdmi_encoder_mode_valid(struct drm_encoder *encoder, { struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder); + if (vc4_hdmi->variant->broken_odd_h_timings && + ((mode->hdisplay % 2) || (mode->hsync_start % 2) || + (mode->hsync_end % 2) || (mode->htotal % 2))) + return MODE_H_ILLEGAL; + if ((mode->clock * 1000) > vc4_hdmi->variant->max_pixel_clock) return MODE_CLOCK_HIGH; @@ -1950,6 +1960,7 @@ static const struct vc4_hdmi_variant bcm2711_hdmi0_variant = { PHY_LANE_2, PHY_LANE_CK, }, + .broken_odd_h_timings = true, .init_resources = vc5_hdmi_init_resources, .csc_setup = vc5_hdmi_csc_setup, @@ -1975,6 +1986,7 @@ static const struct vc4_hdmi_variant bcm2711_hdmi1_variant = { PHY_LANE_CK, PHY_LANE_2, }, + .broken_odd_h_timings = true, .init_resources = vc5_hdmi_init_resources, .csc_setup = vc5_hdmi_csc_setup, diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.h b/drivers/gpu/drm/vc4/vc4_hdmi.h index af45b0d81dec..40e51ece8efe 100644 --- a/drivers/gpu/drm/vc4/vc4_hdmi.h +++ b/drivers/gpu/drm/vc4/vc4_hdmi.h @@ -62,6 +62,9 @@ struct vc4_hdmi_variant { */ enum vc4_hdmi_phy_channel phy_lane_mapping[4]; + /* The BCM2711 cannot deal with odd horizontal pixel timings */ + bool broken_odd_h_timings; + /* Callback to get the resources (memory region, interrupts, * clocks, etc) for that variant. */ -- 2.26.2 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel