https://bugs.freedesktop.org/show_bug.cgi?id=42490 --- Comment #39 from diego.abelenda@xxxxxxxxx 2012-09-08 08:59:02 UTC --- Created attachment 66828 --> https://bugs.freedesktop.org/attachment.cgi?id=66828 dmesg booting with 2 monitors plugged patch applyed on top of drm-fixes-3.6 drm.debug=4 (X with NoAccel) I tested a few things and found out that with the patch over drm-fixes-3.6 I generally get the DVI screen working but the VGA has no signal if it is plugged during the boot. The generally is there because sometimes I just get a black screen on the DVI and then X causes a GPU Hangup (The NoAccel suppresses the Hangup). This situation is rare and If the GPU hangup pressing the reset switch (instead of letting the machine off during some time and doing a cold boot) causes it to happen more often. A "quick" way to do it is booting without the patch starting X without NoAccel and then pressing the reset button and booting with the patch. Seems the firmware doesn't reset the state of the card properly during POST or something. Last night the problem happened "by itself", so it might happen without trying to provoke it. This morning I tried rebooting a few times but didn't get it to happen without provoking it. The attachment is dmesg | grep -e drm -e radeon when the DVI screen stays black (VGA saying no signal) and without hangup (provoking it on the previous boot). The last part is X turning the screens off and trying to wake them up. The situation didn't change. -- Configure bugmail: https://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the assignee for the bug. _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel
