Convert phy-mtk-tphy.txt to YAML schema mediatek,tphy.yaml Signed-off-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx> --- .../bindings/phy/mediatek,tphy.yaml | 260 ++++++++++++++++++ .../devicetree/bindings/phy/phy-mtk-tphy.txt | 162 ----------- 2 files changed, 260 insertions(+), 162 deletions(-) create mode 100644 Documentation/devicetree/bindings/phy/mediatek,tphy.yaml delete mode 100644 Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt diff --git a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml new file mode 100644 index 000000000000..eec75d13ca42 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml @@ -0,0 +1,260 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2020 MediaTek +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/mediatek,tphy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek T-PHY Controller Device Tree Bindings + +maintainers: + - Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx> + +description: | + The T-phy controller supports physical layer functionality for a number of + controllers on MediaTek SoCs, includes USB2.0, USB3.0, PCIe and SATA. + +properties: + $nodename: + pattern: "^t-phy@[0-9a-f]+$" + + compatible: + oneOf: + - items: + - enum: + - mediatek,mt2701-tphy + - enum: + - mediatek,generic-tphy-v1 + - items: + - enum: + - mediatek,mt2712-tphy + - enum: + - mediatek,generic-tphy-v2 + - items: + - enum: + - mediatek,mt8173-u3phy + - items: + - const: mediatek,generic-tphy-v1 + - const: mediatek,generic-tphy-v2 + - const: mediatek,mt8173-u3phy + + reg: + description: | + Register shared by multiple ports, exclude port's private register. + It is needed for T-PHY V1, such as mt2701 and mt8173, but not for + T-PHY V2, such as mt2712. + maxItems: 1 + + "#address-cells": + enum: [1, 2] + + "#size-cells": + enum: [1, 2] + + # Used with non-empty value if optional 'reg' is not provided. + # The format of the value is an arbitrary number of triplets of + # (child-bus-address, parent-bus-address, length). + ranges: true + + mediatek,src-ref-clk-mhz: + description: + Frequency of reference clock for slew rate calibrate + $ref: /schemas/types.yaml#/definitions/uint32 + default: 26 + + mediatek,src-coef: + description: + Coefficient for slew rate calibrate, depends on SoC process + $ref: /schemas/types.yaml#/definitions/uint32 + default: 28 + +# Required child node: +patternProperties: + "^usb-phy@[0-9a-f]+$": + type: object + description: | + A sub-node is required for each port the controller provides. + Address range information including the usual 'reg' property + is used inside these nodes to describe the controller's topology. + + properties: + reg: + maxItems: 1 + + clocks: + items: + - description: Reference clock, (HS is 48Mhz, SS/P is 24~27Mhz) + - description: Reference clock of analog phy, used if the clocks + of analog and digital phys are separated, otherwise uses + "ref" clock only if needed. + + clock-names: + items: + - const: ref + - const: da_ref + + "#phy-cells": + const: 1 + description: | + The cells contain the following arguments. + + - description: The PHY type + enum: + - PHY_TYPE_USB2 + - PHY_TYPE_USB3 + - PHY_TYPE_PCIE + - PHY_TYPE_SATA + + #The following optional vendor properties are only for debug or HQA test + mediatek,eye-src: + description: + The value of slew rate calibrate (U2 phy) + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 7 + + mediatek,eye-vrt: + description: + The selection of VRT reference voltage (U2 phy) + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 7 + + mediatek,eye-term: + description: + The selection of HS_TX TERM reference voltage (U2 phy) + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 7 + + mediatek,intr: + description: + The selection of internal resistor (U2 phy) + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 31 + + mediatek,discth: + description: + The selection of disconnect threshold (U2 phy) + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 15 + + mediatek,bc12: + description: + Specify the flag to enable BC1.2 if support it + type: boolean + + required: + - reg + - clocks + - clock-names + - "#phy-cells" + + additionalProperties: false + +required: + - compatible + - "#address-cells" + - "#size-cells" + - ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8173-clk.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/phy/phy.h> + susb: usb@11271000 { + compatible = "mediatek,mt8173-mtu3"; + reg = <0x11271000 0x3000>, <0x11280700 0x0100>; + reg-names = "mac", "ippc"; + phys = <&u2port0 PHY_TYPE_USB2>, + <&u3port0 PHY_TYPE_USB3>, + <&u2port1 PHY_TYPE_USB2>; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>; + }; + + u3phy: t-phy@11290000 { + compatible = "mediatek,mt8173-u3phy"; + reg = <0x11290000 0x800>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + status = "okay"; + + u2port0: usb-phy@11290800 { + reg = <0x11290800 0x100>; + clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>; + clock-names = "ref"; + #phy-cells = <1>; + status = "okay"; + }; + + u3port0: usb-phy@11290900 { + reg = <0x11290900 0x700>; + clocks = <&clk26m>; + clock-names = "ref"; + #phy-cells = <1>; + status = "okay"; + }; + + u2port1: usb-phy@11291000 { + reg = <0x11291000 0x100>; + clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>; + clock-names = "ref"; + #phy-cells = <1>; + status = "okay"; + }; + }; + +#Layout differences of banks between mt8173/mt2701 and mt2712 +#------------------------------------------------------------- +#mt8173 and mt2701: +#port offset bank +#shared 0x0000 SPLLC +# 0x0100 FMREG +#u2 port0 0x0800 U2PHY_COM +#u3 port0 0x0900 U3PHYD +# 0x0a00 U3PHYD_BANK2 +# 0x0b00 U3PHYA +# 0x0c00 U3PHYA_DA +#u2 port1 0x1000 U2PHY_COM +#u3 port1 0x1100 U3PHYD +# 0x1200 U3PHYD_BANK2 +# 0x1300 U3PHYA +# 0x1400 U3PHYA_DA +#u2 port2 0x1800 U2PHY_COM +# ... +# +#mt2712: +#port offset bank +#u2 port0 0x0000 MISC +# 0x0100 FMREG +# 0x0300 U2PHY_COM +#u3 port0 0x0700 SPLLC +# 0x0800 CHIP +# 0x0900 U3PHYD +# 0x0a00 U3PHYD_BANK2 +# 0x0b00 U3PHYA +# 0x0c00 U3PHYA_DA +#u2 port1 0x1000 MISC +# 0x1100 FMREG +# 0x1300 U2PHY_COM +#u3 port1 0x1700 SPLLC +# 0x1800 CHIP +# 0x1900 U3PHYD +# 0x1a00 U3PHYD_BANK2 +# 0x1b00 U3PHYA +# 0x1c00 U3PHYA_DA +#u2 port2 0x2000 MISC +# ... +# +#SPLLC shared by u3 ports and FMREG shared by u2 ports on +#mt8173/mt2701 are put back into each port; a new bank MISC for +#u2 ports and CHIP for u3 ports are added on mt2712. + +... diff --git a/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt b/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt deleted file mode 100644 index dd75b676b71d..000000000000 --- a/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt +++ /dev/null @@ -1,162 +0,0 @@ -MediaTek T-PHY binding --------------------------- - -T-phy controller supports physical layer functionality for a number of -controllers on MediaTek SoCs, such as, USB2.0, USB3.0, PCIe, and SATA. - -Required properties (controller (parent) node): - - compatible : should be one of - "mediatek,generic-tphy-v1" - "mediatek,generic-tphy-v2" - "mediatek,mt2701-u3phy" (deprecated) - "mediatek,mt2712-u3phy" (deprecated) - "mediatek,mt8173-u3phy"; - make use of "mediatek,generic-tphy-v1" on mt2701 instead and - "mediatek,generic-tphy-v2" on mt2712 instead. - -- #address-cells: the number of cells used to represent physical - base addresses. -- #size-cells: the number of cells used to represent the size of an address. -- ranges: the address mapping relationship to the parent, defined with - - empty value: if optional 'reg' is used. - - non-empty value: if optional 'reg' is not used. should set - the child's base address to 0, the physical address - within parent's address space, and the length of - the address map. - -Required nodes : a sub-node is required for each port the controller - provides. Address range information including the usual - 'reg' property is used inside these nodes to describe - the controller's topology. - -Optional properties (controller (parent) node): - - reg : offset and length of register shared by multiple ports, - exclude port's private register. It is needed on mt2701 - and mt8173, but not on mt2712. - - mediatek,src-ref-clk-mhz : frequency of reference clock for slew rate - calibrate - - mediatek,src-coef : coefficient for slew rate calibrate, depends on - SoC process - -Required properties (port (child) node): -- reg : address and length of the register set for the port. -- #phy-cells : should be 1 (See second example) - cell after port phandle is phy type from: - - PHY_TYPE_USB2 - - PHY_TYPE_USB3 - - PHY_TYPE_PCIE - - PHY_TYPE_SATA - -Optional properties (PHY_TYPE_USB2 port (child) node): -- clocks : a list of phandle + clock-specifier pairs, one for each - entry in clock-names -- clock-names : may contain - "ref": 48M reference clock for HighSpeed (digital) phy; and 26M - reference clock for SuperSpeed (digital) phy, sometimes is - 24M, 25M or 27M, depended on platform. - "da_ref": the reference clock of analog phy, used if the clocks - of analog and digital phys are separated, otherwise uses - "ref" clock only if needed. - -- mediatek,eye-src : u32, the value of slew rate calibrate -- mediatek,eye-vrt : u32, the selection of VRT reference voltage -- mediatek,eye-term : u32, the selection of HS_TX TERM reference voltage -- mediatek,bc12 : bool, enable BC12 of u2phy if support it -- mediatek,discth : u32, the selection of disconnect threshold -- mediatek,intr : u32, the selection of internal R (resistance) - -Example: - -u3phy: usb-phy@11290000 { - compatible = "mediatek,mt8173-u3phy"; - reg = <0 0x11290000 0 0x800>; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - u2port0: usb-phy@11290800 { - reg = <0 0x11290800 0 0x100>; - clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>; - clock-names = "ref"; - #phy-cells = <1>; - }; - - u3port0: usb-phy@11290900 { - reg = <0 0x11290800 0 0x700>; - clocks = <&clk26m>; - clock-names = "ref"; - #phy-cells = <1>; - }; - - u2port1: usb-phy@11291000 { - reg = <0 0x11291000 0 0x100>; - clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>; - clock-names = "ref"; - #phy-cells = <1>; - }; -}; - -Specifying phy control of devices ---------------------------------- - -Device nodes should specify the configuration required in their "phys" -property, containing a phandle to the phy port node and a device type; -phy-names for each port are optional. - -Example: - -#include <dt-bindings/phy/phy.h> - -usb30: usb@11270000 { - ... - phys = <&u2port0 PHY_TYPE_USB2>, <&u3port0 PHY_TYPE_USB3>; - phy-names = "usb2-0", "usb3-0"; - ... -}; - - -Layout differences of banks between mt8173/mt2701 and mt2712 -------------------------------------------------------------- -mt8173 and mt2701: -port offset bank -shared 0x0000 SPLLC - 0x0100 FMREG -u2 port0 0x0800 U2PHY_COM -u3 port0 0x0900 U3PHYD - 0x0a00 U3PHYD_BANK2 - 0x0b00 U3PHYA - 0x0c00 U3PHYA_DA -u2 port1 0x1000 U2PHY_COM -u3 port1 0x1100 U3PHYD - 0x1200 U3PHYD_BANK2 - 0x1300 U3PHYA - 0x1400 U3PHYA_DA -u2 port2 0x1800 U2PHY_COM - ... - -mt2712: -port offset bank -u2 port0 0x0000 MISC - 0x0100 FMREG - 0x0300 U2PHY_COM -u3 port0 0x0700 SPLLC - 0x0800 CHIP - 0x0900 U3PHYD - 0x0a00 U3PHYD_BANK2 - 0x0b00 U3PHYA - 0x0c00 U3PHYA_DA -u2 port1 0x1000 MISC - 0x1100 FMREG - 0x1300 U2PHY_COM -u3 port1 0x1700 SPLLC - 0x1800 CHIP - 0x1900 U3PHYD - 0x1a00 U3PHYD_BANK2 - 0x1b00 U3PHYA - 0x1c00 U3PHYA_DA -u2 port2 0x2000 MISC - ... - - SPLLC shared by u3 ports and FMREG shared by u2 ports on -mt8173/mt2701 are put back into each port; a new bank MISC for -u2 ports and CHIP for u3 ports are added on mt2712. -- 2.18.0 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
