[Bug 42490] NUTMEG DP to VGA bridge not working

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



https://bugs.freedesktop.org/show_bug.cgi?id=42490

--- Comment #34 from diego.abelenda@xxxxxxxxx 2012-09-07 21:07:16 UTC ---
Created attachment 66817
  --> https://bugs.freedesktop.org/attachment.cgi?id=66817
dmesg booting with 2 monitors plugged patch applyed on top of drm-fixes-3.6
drm.debug=4

With the additional patch, I get the DVI screen displaying things when both a
plugged-in but the VGA one now says there is no signal (instead of staying
black). So the behavior is somewhat similar to the vanilla kernel in that
regard.

Booting with the VGA unplugged and plugging it later gives the same behavior as
without that patch (i.e. better than the vanilla kernel).

Attached is the dmesg | grep -e drm -e radeon when the 2 screens are plugged
and the VGA says no signal.

-- 
Configure bugmail: https://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel


[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux