The first patch was initially part of the series [1] but for some reason was not picked when the series were merged, so I included in this series because it is needed to make the others to work properly. The same happened for the second patch, was part of series [1] but not merged. The third patch and next are part of the original series and are to rework the power handling to get the EDID. Basically, we need to make sure all the needed is powered to be able to get the EDID. Before, we saw that getting the EDID failed as explained in the third patch. [1] https://lkml.org/lkml/2020/6/15/1208 Changes in v2: - Included the patch `drm/bridge_connector: Set default status connected for eDP connectors` - Included the patch `drm/bridge: ps8640: Get the EDID from eDP control` - Use drm_bridge_chain_pre_enable/post_disable() helpers (Sam Ravnborg) Enric Balletbo i Serra (5): drm/bridge_connector: Set default status connected for eDP connectors drm/bridge: ps8640: Get the EDID from eDP control drm/bridge: ps8640: Return an error for incorrect attach flags drm/bridge: ps8640: Print an error if VDO control fails drm/bridge: ps8640: Rework power state handling drivers/gpu/drm/bridge/parade-ps8640.c | 89 ++++++++++++++++++++++---- drivers/gpu/drm/drm_bridge_connector.c | 1 + 2 files changed, 79 insertions(+), 11 deletions(-) -- 2.28.0 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
