CC Rob Herring and devicetree-list > Gesendet: Dienstag, 04. August 2020 um 18:55 Uhr > Von: "Frank Wunderlich" <linux@xxxxxxxxx> > An: linux-mediatek@xxxxxxxxxxxxxxxxxxx > Cc: "Frank Wunderlich" <frank-w@xxxxxxxxxxxxxxx>, "Chun-Kuang Hu" <chunkuang.hu@xxxxxxxxxx>, "Philipp Zabel" <p.zabel@xxxxxxxxxxxxxx>, "David Airlie" <airlied@xxxxxxxx>, "Daniel Vetter" <daniel@xxxxxxxx>, "Matthias Brugger" <matthias.bgg@xxxxxxxxx>, dri-devel@xxxxxxxxxxxxxxxxxxxxx, linux-arm-kernel@xxxxxxxxxxxxxxxxxxx, linux-kernel@xxxxxxxxxxxxxxx > Betreff: [PATCH v4 1/6] dt-bindings: mediatek: add mt7623 display-nodes > > From: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx> > > mt7623 uses mt2701/mt8173 for drm, but have own compatibles > > Signed-off-by: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx> > --- > .../devicetree/bindings/display/mediatek/mediatek,disp.txt | 2 +- > .../devicetree/bindings/display/mediatek/mediatek,dpi.txt | 2 +- > .../devicetree/bindings/display/mediatek/mediatek,dsi.txt | 4 ++-- > .../devicetree/bindings/display/mediatek/mediatek,hdmi.txt | 4 ++++ > 4 files changed, 8 insertions(+), 4 deletions(-) > > diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt > index b91e709db7a4..121220745d46 100644 > --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt > +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt > @@ -43,7 +43,7 @@ Required properties (all function blocks): > "mediatek,<chip>-dpi" - DPI controller, see mediatek,dpi.txt > "mediatek,<chip>-disp-mutex" - display mutex > "mediatek,<chip>-disp-od" - overdrive > - the supported chips are mt2701, mt2712 and mt8173. > + the supported chips are mt2701, mt7623, mt2712 and mt8173. > - reg: Physical base address and length of the function block register space > - interrupts: The interrupt signal from the function block (required, except for > merge and split function blocks). > diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt > index 77def4456706..dc1ebd13cc88 100644 > --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt > +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt > @@ -7,7 +7,7 @@ output bus. > > Required properties: > - compatible: "mediatek,<chip>-dpi" > - the supported chips are mt2701 , mt8173 and mt8183. > + the supported chips are mt2701, mt7623, mt8173 and mt8183. > - reg: Physical base address and length of the controller's registers > - interrupts: The interrupt signal from the function block. > - clocks: device clocks > diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt > index 8e4729de8c85..f06f24d405a5 100644 > --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt > +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt > @@ -7,7 +7,7 @@ channel output. > > Required properties: > - compatible: "mediatek,<chip>-dsi" > - the supported chips are mt2701, mt8173 and mt8183. > +- the supported chips are mt2701, mt7623, mt8173 and mt8183. > - reg: Physical base address and length of the controller's registers > - interrupts: The interrupt signal from the function block. > - clocks: device clocks > @@ -26,7 +26,7 @@ The MIPI TX configuration module controls the MIPI D-PHY. > > Required properties: > - compatible: "mediatek,<chip>-mipi-tx" > - the supported chips are mt2701, mt8173 and mt8183. > +- the supported chips are mt2701, 7623, mt8173 and mt8183. > - reg: Physical base address and length of the controller's registers > - clocks: PLL reference clock > - clock-output-names: name of the output clock line to the DSI encoder > diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt > index 7b124242b0c5..6b1c586403e4 100644 > --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt > +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt > @@ -6,6 +6,7 @@ its parallel input. > > Required properties: > - compatible: Should be "mediatek,<chip>-hdmi". > +- the supported chips are mt2701, mt7623 and mt8173 > - reg: Physical base address and length of the controller's registers > - interrupts: The interrupt signal from the function block. > - clocks: device clocks > @@ -32,6 +33,7 @@ The HDMI CEC controller handles hotplug detection and CEC communication. > > Required properties: > - compatible: Should be "mediatek,<chip>-cec" > +- the supported chips are mt7623 and mt8173 > - reg: Physical base address and length of the controller's registers > - interrupts: The interrupt signal from the function block. > - clocks: device clock > @@ -44,6 +46,7 @@ The Mediatek's I2C controller is used to interface with I2C devices. > > Required properties: > - compatible: Should be "mediatek,<chip>-hdmi-ddc" > +- the supported chips are mt7623 and mt8173 > - reg: Physical base address and length of the controller's registers > - clocks: device clock > - clock-names: Should be "ddc-i2c". > @@ -56,6 +59,7 @@ output and drives the HDMI pads. > > Required properties: > - compatible: "mediatek,<chip>-hdmi-phy" > +- the supported chips are mt2701, mt7623 and mt8173 > - reg: Physical base address and length of the module's registers > - clocks: PLL reference clock > - clock-names: must contain "pll_ref" > -- > 2.25.1 > > _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
