Hi Maxime, Am 08.07.20 um 19:41 schrieb Maxime Ripard: > Hi everyone, > > Here's a (pretty long) series to introduce support in the VC4 DRM driver > for the display pipeline found in the BCM2711 (and thus the RaspberryPi 4). > > The main differences are that there's two HDMI controllers and that there's > more pixelvalve now. Those pixelvalve come with a mux in the HVS that still > have only 3 FIFOs. Both of those differences are breaking a bunch of > expectations in the driver, so we first need a good bunch of cleanup and > reworks to introduce support for the new controllers. > > Similarly, the HDMI controller has all its registers shuffled and split in > multiple controllers now, so we need a bunch of changes to support this as > well. > > Only the HDMI support is enabled for now (even though the DPI and DSI > outputs have been tested too). > > Let me know if you have any comments > Maxime > > Cc: bcm-kernel-feedback-list@xxxxxxxxxxxx > Cc: devicetree@xxxxxxxxxxxxxxx > Cc: Kamal Dasu <kdasu.kdev@xxxxxxxxx> > Cc: linux-clk@xxxxxxxxxxxxxxx > Cc: Michael Turquette <mturquette@xxxxxxxxxxxx> > Cc: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx> > Cc: Rob Herring <robh+dt@xxxxxxxxxx> > Cc: Stephen Boyd <sboyd@xxxxxxxxxx> > > Changes from v3: > - Rebased on top of next-20200708 > - Added a name to the HDMI audio codec component > - Only disable the BCM2711 HDMI pixelvalves at boot > - Fixed an error in the HVS binding > - Fix a framebuffer size condition that was inverted > - Changed the channel allocation algorithm using Eric's suggestion > - Always write the muxing values instead of updating if needed > - Improved a bit the hvs_available_channels comment in the structure > - Change atomic_complete_commit code to use for_each_new_crtc_in_state > - Change the muxing code to take into account disparities between the > BCM2711 and previous SoCs. > - Only change the clock rate on BCM2711 during a modeset > - Fix a crash at atomic_disable > - Use clk_set_min_rate for the core clock too > - Add a few defines, and simplify the FIFO level stuff > - Reordered the patches according to Eric's reviews > - Fixed a regression with VID_CTL setting on RPI3 > i additionally applied "drm/vc4/vc4_hdmi: fill ASoC card owner" on top of your series (potential merge conflict). I didn't see any issues with a RPI 3B or RPI 4B. So this whole series is Tested-by: Stefan Wahren <stefan.wahren@xxxxxxxx> Regards Stefan _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
