In order to make further refactoring easier, let's move the HVS channel
setup / teardown to their own function.
Signed-off-by: Maxime Ripard <maxime@xxxxxxxxxx>
---
drivers/gpu/drm/vc4/vc4_hvs.c | 104 +++++++++++++++++++----------------
1 file changed, 58 insertions(+), 46 deletions(-)
diff --git a/drivers/gpu/drm/vc4/vc4_hvs.c b/drivers/gpu/drm/vc4/vc4_hvs.c
index 50f9a9674a7e..78bb1c0b0b76 100644
--- a/drivers/gpu/drm/vc4/vc4_hvs.c
+++ b/drivers/gpu/drm/vc4/vc4_hvs.c
@@ -196,6 +196,62 @@ static void vc4_hvs_update_gamma_lut(struct drm_crtc *crtc)
vc4_hvs_lut_load(crtc);
}
+static int vc4_hvs_init_channel(struct vc4_dev *vc4, struct drm_crtc *crtc,
+ struct drm_display_mode *mode, bool oneshot)
+{
+ struct vc4_crtc_state *vc4_crtc_state = to_vc4_crtc_state(crtc->state);
+ unsigned int chan = vc4_crtc_state->assigned_channel;
+ u32 dispctrl;
+
+ /* Turn on the scaler, which will wait for vstart to start
+ * compositing.
+ * When feeding the transposer, we should operate in oneshot
+ * mode.
+ */
+ dispctrl = SCALER_DISPCTRLX_ENABLE;
+
+ if (!vc4->hvs->hvs5)
+ dispctrl |= VC4_SET_FIELD(mode->hdisplay,
+ SCALER_DISPCTRLX_WIDTH) |
+ VC4_SET_FIELD(mode->vdisplay,
+ SCALER_DISPCTRLX_HEIGHT) |
+ (oneshot ? SCALER_DISPCTRLX_ONESHOT : 0);
+ else
+ dispctrl |= VC4_SET_FIELD(mode->hdisplay,
+ SCALER5_DISPCTRLX_WIDTH) |
+ VC4_SET_FIELD(mode->vdisplay,
+ SCALER5_DISPCTRLX_HEIGHT) |
+ (oneshot ? SCALER5_DISPCTRLX_ONESHOT : 0);
+
+ HVS_WRITE(SCALER_DISPCTRLX(chan), dispctrl);
+
+ return 0;
+}
+
+static void vc4_hvs_stop_channel(struct drm_device *dev, unsigned int chan)
+{
+ struct vc4_dev *vc4 = to_vc4_dev(dev);
+
+ if (HVS_READ(SCALER_DISPCTRLX(chan)) & SCALER_DISPCTRLX_ENABLE)
+ return;
+
+ HVS_WRITE(SCALER_DISPCTRLX(chan),
+ HVS_READ(SCALER_DISPCTRLX(chan)) | SCALER_DISPCTRLX_RESET);
+ HVS_WRITE(SCALER_DISPCTRLX(chan),
+ HVS_READ(SCALER_DISPCTRLX(chan)) & ~SCALER_DISPCTRLX_ENABLE);
+
+ /* Once we leave, the scaler should be disabled and its fifo empty. */
+ WARN_ON_ONCE(HVS_READ(SCALER_DISPCTRLX(chan)) & SCALER_DISPCTRLX_RESET);
+
+ WARN_ON_ONCE(VC4_GET_FIELD(HVS_READ(SCALER_DISPSTATX(chan)),
+ SCALER_DISPSTATX_MODE) !=
+ SCALER_DISPSTATX_MODE_DISABLED);
+
+ WARN_ON_ONCE((HVS_READ(SCALER_DISPSTATX(chan)) &
+ (SCALER_DISPSTATX_FULL | SCALER_DISPSTATX_EMPTY)) !=
+ SCALER_DISPSTATX_EMPTY);
+}
+
int vc4_hvs_atomic_check(struct drm_crtc *crtc,
struct drm_crtc_state *state)
{
@@ -268,63 +324,19 @@ void vc4_hvs_atomic_enable(struct drm_crtc *crtc,
struct vc4_crtc_state *vc4_state = to_vc4_crtc_state(crtc->state);
struct drm_display_mode *mode = &crtc->state->adjusted_mode;
bool oneshot = vc4_state->feed_txp;
- u32 dispctrl;
vc4_hvs_update_dlist(crtc);
-
- /* Turn on the scaler, which will wait for vstart to start
- * compositing.
- * When feeding the transposer, we should operate in oneshot
- * mode.
- */
- dispctrl = SCALER_DISPCTRLX_ENABLE;
-
- if (!vc4->hvs->hvs5)
- dispctrl |= VC4_SET_FIELD(mode->hdisplay,
- SCALER_DISPCTRLX_WIDTH) |
- VC4_SET_FIELD(mode->vdisplay,
- SCALER_DISPCTRLX_HEIGHT) |
- (oneshot ? SCALER_DISPCTRLX_ONESHOT : 0);
- else
- dispctrl |= VC4_SET_FIELD(mode->hdisplay,
- SCALER5_DISPCTRLX_WIDTH) |
- VC4_SET_FIELD(mode->vdisplay,
- SCALER5_DISPCTRLX_HEIGHT) |
- (oneshot ? SCALER5_DISPCTRLX_ONESHOT : 0);
-
- HVS_WRITE(SCALER_DISPCTRLX(vc4_state->assigned_channel), dispctrl);
+ vc4_hvs_init_channel(vc4, crtc, mode, oneshot);
}
void vc4_hvs_atomic_disable(struct drm_crtc *crtc,
struct drm_crtc_state *old_state)
{
struct drm_device *dev = crtc->dev;
- struct vc4_dev *vc4 = to_vc4_dev(dev);
struct vc4_crtc_state *vc4_state = to_vc4_crtc_state(old_state);
unsigned int chan = vc4_state->assigned_channel;
- if (HVS_READ(SCALER_DISPCTRLX(chan)) &
- SCALER_DISPCTRLX_ENABLE) {
- HVS_WRITE(SCALER_DISPCTRLX(chan),
- SCALER_DISPCTRLX_RESET);
-
- /* While the docs say that reset is self-clearing, it
- * seems it doesn't actually.
- */
- HVS_WRITE(SCALER_DISPCTRLX(chan), 0);
- }
-
- /* Once we leave, the scaler should be disabled and its fifo empty. */
-
- WARN_ON_ONCE(HVS_READ(SCALER_DISPCTRLX(chan)) & SCALER_DISPCTRLX_RESET);
-
- WARN_ON_ONCE(VC4_GET_FIELD(HVS_READ(SCALER_DISPSTATX(chan)),
- SCALER_DISPSTATX_MODE) !=
- SCALER_DISPSTATX_MODE_DISABLED);
-
- WARN_ON_ONCE((HVS_READ(SCALER_DISPSTATX(chan)) &
- (SCALER_DISPSTATX_FULL | SCALER_DISPSTATX_EMPTY)) !=
- SCALER_DISPSTATX_EMPTY);
+ vc4_hvs_stop_channel(dev, chan);
}
void vc4_hvs_atomic_flush(struct drm_crtc *crtc,
--
git-series 0.9.1
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
